Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet 911.4 Harvester with a 370.2 Head

Valmet 911.4 Harvester with a 370.2 Head

2008 Valmet 911.4 Harvester with a 370.2 Head. Hour meter reads 8,000 hours, Sisu engine, runs and starts good, just tested hydraulic and engine oils all clean, strong hydraulics and cylinders, tight boom, new hoses, tight pins and bushings, bogies are in good order, extend-a-boom in good condition. Measuring system is in good working order. Feed rollers and grab arms are in good condition. 700 tires @ 60% with a new set of tracks. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 911.4 2008
$122,500
2009 Valmet 415FX

2009 Valmet 415FX

Came off the job working daily. Strong running Cummins 6.7 6 cylinder engine. 20 inch Quadco Head with a brand new saw disc just installed. Quadco head is fixed. Heat and A/C. Excellent undercarriage, new upper rollers being installed as we speak. 2 speed transmission works as it should. Preheater. New paint and decals. No welding on boom and it's very tight. These are very rare and hard to find. We can assist with trucking if needed. Feel free to call us with any questions that you may have.

Fabtek 415 FX 2009
$109,500
2010 Timberpro TL725B

2010 Timberpro TL725B

Good machine. Previously owner operated. Only 10,364 original hours. Heat & A/C. Dasa 4 computer with Rolly II head. Head does have topping saw capability. Motor is there for the topping saw. Head overall is in good condition. Some play in the grab arms. Undercarriage is at roughly 50%. Excellent running 8.3 Cummins engine. Tall single grouser pads in great condition. Preheater. Dimensions are 9'9" wide and 12'3" tall. We do take trades depending on what you have and we can also assist with shipping and financing if needed. Please give us a call to hear about all that we have to offer. Thanks for looking!

Timberpro TL725B 2010
$139,500
2002 Ponsse Ergo 6W

2002 Ponsse Ergo 6W

Crane and head have been updated to a 2010 H7. Serial number for the machine is 050188. Tires are at roughly 65 to 70%. Runs good and shifts good. 2 speed hydrostatic transmission. Preheater. Heat and A/C. Please feel free to call us with any questions you may have.

Ponsse Ergo 2002
$79,500
2015 Ponsse Ergo 8W

2015 Ponsse Ergo 8W

Ready to cut wood. Just over 8,200 hours. Mercedes Benz rated at 310 HP runs like a top and sips fuel. This is the easiest to service Ponsse on the market. Hydrostatic transmission. 710 rubber in great condition all around. H7 Processing head. C44 Crane. Preheater. A/C & Heat. Grill guard. Very clean interior. This machine sells for $700,000 new. Great buy here on a second hand machine. We do accept trades depending on what you have and we can also assist with trucking and financing if needed. Please give us a call!!!

Ponsse ERGO 2015
$349,500
CAT 501HD Processor with a Fabtek 4 Roller Head

CAT 501HD Processor with a Fabtek 4 Roller Head

2014 CAT 501HD Processor with a Fabtek 4 Roller Head. Hour meter reads 4,800 hours, runs and starts good, strong hydraulics and cylinders, undercarriage is @ 80%, 24" single grouser pads, Pro heat system, tight boom, heat has independent 3 wheel measuring, grab arms and feed roller are all in good order, drive system is in good working condition, clean machine & well maintained, saw has auto grease system, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 501HD 2014
$245,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2002 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and cylinders, HN 125 Crane. Fire suppression. Webasto pre-heater. 700/50-26.5 tires, strong boom, head is in good working order. Heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2002
$85,000
John Deere 803MH Harvester w/ Waratah C616 Processor Head

John Deere 803MH Harvester w/ Waratah C616 Processor Head

2017 John Deere 803MH Harvester with a Waratah C616 Processor Head with Top Saw and Butt Finder. Hour meter reads 5,773 hours, runs and starts good, pre heat system, strong hydraulics and cylinders, pumps are all in good working order. Undercarriage is in good condition, tight boom, Waratah C616 head and measuring system is in good working condition, heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 803MH 2017
$300,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2003 Ponsse Ergo Harvester with H7 Head. This harvester has a Mercedes Benz engine, starts & runs good, strong hydraulics and cylinders, HN 125 Crane. Tight center section, bogies are in good working order. Fire suppression. Webasto pre-heater. 700/50-26.5 tires, strong boom, head is in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2003
$102,500
2020 Ponsse Ergo

2020 Ponsse Ergo

u-1660-2020 Ponsse Ergo AF 8WD Harvester

Ponsse - 2020
Call for Price
Timberjack 608 Feller Buncher with John Deere FS20 Hot Saw

Timberjack 608 Feller Buncher with John Deere FS20 Hot Saw

2000 Timberjack 608 Feller Buncher with a John Deere FS20 Hot Saw. This equipment has a 40 degree tilt, Quadco 2-3/8" beaver teeth, LED lights all the way around. CAT undercarriage in good shape, 24" double grouser steel tracks, enclosed cab with heat, works great and has A/C but isn't hooked up. Has owners manuals. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 608 2000
$49,900
Timberjack 1270B Harvester with a 762C Head

Timberjack 1270B Harvester with a 762C Head

1999 Timberjack 1270B Harvester with a 762C Head. This machine has a Navstar DT 466 engine that has just been gone through (has new rings, bearings, gaskets) runs and starts good. Strong hydraulics, newer hyrdraulic pump. Boom and steer cylinders just resealed. Head, CPU, and measuring system are in working order. New Left hand control, New windshield, 710 tires, bogies and bearings are in good condition, tight center, pins and bushings have normal wear, engine pre-heater, heat, A/C was just gone thru, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

Timberjack 1270B 1999
$47,500