Ponsse Harvesters/Processors For Sale

Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2014 Ponsse Ergo Harvester with H7 Head. Hour meter reads 20,025 hours. Mercedes engine starts and runs good. 710 tires are estimated at 85%. Two sets of Eco Tracks that are estimated at 80%. H7 head is newer, has 7,000 hours on it. The previous head comes with and is operational, also has the rotational gear. Webasto preheater. Enclosed cab has heat, A/C, radio, & halogen lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Ponsse Ergo 2014
$125,000
2015 PONSSE SCORPION KING

2015 PONSSE SCORPION KING

Nice working processor. Clean inside and out. One set of tracks in good condition go with the machine. Mercedes Benz motor runs great. Auto Lube grease system. Pre heater. Back up Camera. Heat and A/C. C50 100 Crane. Serial number for crane is C010144. Serial number for machine is PONS12FAKAA010103. Tire size is 710-45/26.5 and at 60% roughly. Hydrostatic transmission works as it should. Just over 9,500 hours. Machine is tight. We do take trades depending on what you have and we can also assist with shipping and financing if needed. Thanks for looking!

- - Unknown
$295,000
2001 Ponsse Ergo

2001 Ponsse Ergo

Nice low hour machine at only 11,502 hours. Strong running 6 cylinder Mercedes Benz diesel. Hydrostatic 2 speed transmission shifts as it should. Heat & A/C. Webasto preheater. H73E processing head with the HN125 Crane. Front tire size is 700/55-34 and rear bogey tires are 700/50-26.5. Rubber all around is at roughly 65%. Seat is in excellent condition. Interior and exterior are in good condition. Owner operated machine and well cared for. We do take trades depending on what you have and we can assist with financing and shipping if needed as well. Thanks for looking!

Ponsse Ergo 2001
$89,500
Ponsse Ergo 8 Wheel Processor with H7 Head ***SOLD***

Ponsse Ergo 8 Wheel Processor with H7 Head ***SOLD***

2014 Ponsse Ergo 8 Wheel Processor with H7 Head. Hour meter reads 15,878 hours. Mercedes Engine is in good condition. Straight boom with lights. 710/45x26.5 tires @ 60% on average. Bogie tracks @ 60% life remaining. Hydraulics in good working order. Comfort grip controls. Heat, A/C, radio, preheater. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Ponsse Ergo 2014
$164,500
Ponsse Scorpion King with H7 Harvester Head

Ponsse Scorpion King with H7 Harvester Head

2016 Ponsse Scorpion King with H7 Harvester Head. Hour meter reads 8,200 hours. Mercedes engine starts and runs good. 710 Nokian tires have had balanced bogie tracks on them for the life of the machine. They are at 90%. Tracks are also in good shape. C50 crane is tight. The H7 harvesting head works as it should, roller and feed wheels are in great condition. This machine has auto grease, auto fuel fill pump (from ground), & a 120 gal. fuel tank. Also has a DAFO fire suppression system & Webasto preheater. Enclosed cab has heat, A/C, radio, and LED lights. Seat is heated, cooled, and lockable. Front, side, and skylight wipers. New swing bearing at 6,500 hours, and resealed pumps at 5,500 hours. This is a pre-emission, well-maintained, and well taken care of machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Scorpion King 2016
$369,000
Ponsse Beaver Harvester

Ponsse Beaver Harvester

2007 Ponsse Beaver Harvester with H60 Processing Head. Hour meter reads 17,019 hours. Mercedes engine runs and starts good. Tires are at 50%. New turbo, alternators, windshield, and rear tire chains. Webasto preheater rebuilt winter of 2020. H60 Processing Head has new feed wheels. Saw bar hydraulic cylinder has been replaced and the rest of the cylinders on the head have been repacked. Bogie tracks included. Has heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Ponsse Beaver 2007
$79,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$Call for Price
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2005 Ponsse Ergo Harvester. Hour meter reads 15,000 hours. This equipment runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2005
$75,000
Ponsse Ergo with 73E Processing Head

Ponsse Ergo with 73E Processing Head

2008 Ponsse Ergo Processor with 73E Processing Head. Hour meter reads 12,400 hours. HN125 crane. 710 tires are at 65%. New roller motors, rollers, measuring wheel, and front window. Original paint and decals. Comes with set of bogie tracks. Dry and well maintained, one owner machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2008
$105,000
2020 Ponsse Ergo

2020 Ponsse Ergo

2020 Ponsse Ergo u-1660 8WD Harvester with tracks

- - 2020
$Call for Price
Ponsse Ergo 6WD Harvester with a Ponsse H7 Head ***SOLD***

Ponsse Ergo 6WD Harvester with a Ponsse H7 Head ***SOLD***

2010 Ponsse Ergo 6WD Harvester with a Ponsse H7 Head. Machine has only 10,400 hours. 6cyl Mercedes Benz engine, runs and starts good, preheat system, strong hydraulics and cylinders. Drive system in good working order. Tight center section, tight boom and boom base, squirt works as it should. Bogies and axles are in good condition. H7 head has good rollers and grab arms. Measuring system works as it should. Comfort grips. Heat, A/C, and lights. Tires are @ 50%. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Ponsse Ergo 2010
$149,500
Ponsse Scorpion King Harvester

Ponsse Scorpion King Harvester

2020 Ponsse Scorpion King Harvester. ~2700 hours on hour meter. 10m C50 crane, H7 processing head, & 710-45x26.5" tires at 90%. Black Bruin RH3016 and double brake link, fixed back delimbing knives, thumbnail feed rollers, & saw box lights. This machine has three cameras (engine side and reverse), LED lights, radio, heat, A/C. Also has the fridge, food heater, & sunshades. This machine is ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Scorpion King 2020
$579,000