Sort By:   GridGallery
Photo Title
Make Model Year Price
2016 BARKO 260B

2016 BARKO 260B

One owner buncher. Clean and straight inside and out. Just turned 1,807 hours. Serial number for machine is 11626023625. 360 rotation 22 inch Quadco head. 6.7 Cummins rated at 225 HP. Pro heater. Heat and A/C. 2 speed travel works as it should. Undercarriage is at 85%. 36 inch single grouser pads. We do take trades depending on what you have and we can assist with financing and trucking if needed. Thanks for looking!

- - Unknown
$295,000
2006 Rottne H20

2006 Rottne H20

2006 Rottne H20 Harvester with SP761 Processing Head

Rottne H20 2006
$150,000
1998 TIMBCO T415C

1998 TIMBCO T415C

1998 415 c 24,000 Hours with 2006 Rolly 2 with Woodland IFM computer New 1,500 hours ago , air ride seat , injectors , head gasket new pins and bushings on stick boom and stick boom cylinder and tool cylinder New on head 1500 hours ago Saw motor and saw box bearings Rebuild cylinders All pins and bushings Most hydraulic hose's Undercarriage is about 80% except for the pads have more wear We can help with financing and shipping, this is a consignment machine so no trades. You can speak to current owner

- - Unknown
$75,000
2014 TIMBERPRO TL735B

2014 TIMBERPRO TL735B

Clean inside and out. This processor has been very well cared for. Logmax 7000 XT processing head in nice condition. 8.3 Cummins runs like a top. New main implement pump. New back up camera. New top saw. All new hoses in head wrist. All pressure recently inspected and set by Komatsu. Double grouser pads. Leveling cab. 2 speed travel works as it should. Previously owner operated machine. Undercarriage Super nice machine. Double grouser pads. Leveling cab. 2 speed travel works as it should. Previously owner operated machine. Undercarriage at roughly 85%. We can assist with shipping and financing if needed. Thanks for looking!

- - Unknown
$229,500
2001 Ponsse Ergo

2001 Ponsse Ergo

Nice low hour machine at only 11,502 hours. Strong running 6 cylinder Mercedes Benz diesel. Hydrostatic 2 speed transmission shifts as it should. Heat & A/C. Webasto preheater. H73E processing head with the HN125 Crane. Front tire size is 700/55-34 and rear bogey tires are 700/50-26.5. Rubber all around is at roughly 65%. Seat is in excellent condition. Interior and exterior are in good condition. Owner operated machine and well cared for. We do take trades depending on what you have and we can assist with financing and shipping if needed as well. Thanks for looking!

Ponsse Ergo 2001
$89,500
Timbco T415-C Harvester with Ponsse H73 Processing Head

Timbco T415-C Harvester with Ponsse H73 Processing Head

1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco T415-C 1998
$51,000
Ponsse Ergo 8 Wheel Processor with H7 Head ***SOLD***

Ponsse Ergo 8 Wheel Processor with H7 Head ***SOLD***

2014 Ponsse Ergo 8 Wheel Processor with H7 Head. Hour meter reads 15,878 hours. Mercedes Engine is in good condition. Straight boom with lights. 710/45x26.5 tires @ 60% on average. Bogie tracks @ 60% life remaining. Hydraulics in good working order. Comfort grip controls. Heat, A/C, radio, preheater. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Ponsse Ergo 2014
$164,500
Rottne H-14B Harvester with a SP561 LF Head

Rottne H-14B Harvester with a SP561 LF Head

2013 Rottne H-14B Harvester with a SP561 LF Head. Only 7,300 hours on this machine. John Deere 6068 engine, runs and starts good, pre-heat system, strong hydraulics and drive system. RK-140 crane, SP-561 LF head is in good working order, Dasa 5 computer, tight boom, 710 tires with track and chains, Heat, A/C, LED lights, and radio. Well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. More photos available upon request Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. More photos available upon request. REDUCED price from $199,000.00

Rottne H14B 2013
$185,000
John Deere 703JH with Waratah HTH 622B Head

John Deere 703JH with Waratah HTH 622B Head

2014 John Deere 703JH with Waratah HTH 622B Head. This unit has 8000hrs, John Deere engine, runs and starts good. Pro-Heat system, u/c 60%. Strong hydraulics and cylinders, no leaks, tight controls, computer and measuring system all in good working order. Waratah 622B head has good feed rollers and grab arm everything in good working condition. Heat a/c and lights. Ready to Work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***REDUCED from 189,500.00.

John Deere 703JH 2014
$178,900
Ponsse Scorpion King with H7 Harvester Head

Ponsse Scorpion King with H7 Harvester Head

2016 Ponsse Scorpion King with H7 Harvester Head. Hour meter reads 8,200 hours. Mercedes engine starts and runs good. 710 Nokian tires have had balanced bogie tracks on them for the life of the machine. They are at 90%. Tracks are also in good shape. C50 crane is tight. The H7 harvesting head works as it should, roller and feed wheels are in great condition. This machine has auto grease, auto fuel fill pump (from ground), & a 120 gal. fuel tank. Also has a DAFO fire suppression system & Webasto preheater. Enclosed cab has heat, A/C, radio, and LED lights. Seat is heated, cooled, and lockable. Front, side, and skylight wipers. New swing bearing at 6,500 hours, and resealed pumps at 5,500 hours. This is a pre-emission, well-maintained, and well taken care of machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Scorpion King 2016
$369,000
John Deere 1470E with H290 Processing Head

John Deere 1470E with H290 Processing Head

2010 John Deere 1470E with H290 Processing Head. Hour meter reads ~16,000 hours. This machine has been used by only one operator. John Deere 6090H engine starts and runs good. Very dry engine bay, no leaks or buildup. 750/55-26.5 tires on the rear are at 55%. 700/70R34 tires on the front are at 80%. This machine has a tight and dry center section and boom. AFEX fire suppression system, Webasto preheater, self-leveling cab, & Timbermatic computer system. H290 processing head is in good shape, feeders and roller work as they should. Owner operated. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA

John Deere 1470E 2010
$129,500
Ponsse Beaver Harvester

Ponsse Beaver Harvester

2007 Ponsse Beaver Harvester with H60 Processing Head. Hour meter reads 17,019 hours. Mercedes engine runs and starts good. Tires are at 50%. New turbo, alternators, windshield, and rear tire chains. Webasto preheater rebuilt winter of 2020. H60 Processing Head has new feed wheels. Saw bar hydraulic cylinder has been replaced and the rest of the cylinders on the head have been repacked. Bogie tracks included. Has heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Ponsse Beaver 2007
$79,000