Featured in Timbco

Sort By:   GridGallery
Photo Title
Make Model Year Price
Timbco 415FX Harvester with 370E Head

Timbco 415FX Harvester with 370E Head

2005 Timbco 415FX Harvester with 370E Head. Hour meter reads 17,000 hours. Sisu engine starts and runs good. Intercooler works well. Has a Proheat preheater. Undercarriage is estimated at 75%. 24" double grouser pads. 370E processing head has new feed wheels. Enclosed cab has heat, A/C, radio, & lights. Glass is good. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timbco 415FX 2005
$75,000
Timbco 415

Timbco 415

Nice working processor. Previously owner operated machine. Heat & A/C. Ponsse H8 processing head with telescopic boom that was installed professionally by Ponsse. Cummins 5.9 engine runs excellent. New paint and decals. 2 speed travel works as it should. Undercarriage is brand new. 26 inch double grouser pads. we do take trades depending on what you have and we can assist with trucking and financing if needed.

- - Unknown
$79,500
1998 TIMBCO T415C

1998 TIMBCO T415C

1998 415 c 24,000 Hours with 2006 Rolly 2 with Woodland IFM computer New 1,500 hours ago , air ride seat , injectors , head gasket new pins and bushings on stick boom and stick boom cylinder and tool cylinder New on head 1500 hours ago Saw motor and saw box bearings Rebuild cylinders All pins and bushings Most hydraulic hose's Undercarriage is about 80% except for the pads have more wear We can help with financing and shipping, this is a consignment machine so no trades. You can speak to current owner

- - Unknown
$75,000
Timbco T415-C Harvester with Ponsse H73 Processing Head

Timbco T415-C Harvester with Ponsse H73 Processing Head

1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco T415-C 1998
$51,000
1997 Timbco 415C

1997 Timbco 415C

1997 Timbco 415C Processor With Fabtec head Undercarriage 65% Runs and Operates Well

Timbco 415C 1997
$62,500
Timbco 415C with a 2006 Rolly II Processing Head

Timbco 415C with a 2006 Rolly II Processing Head

1998 Timbco 415C with a 2006 Rolly II Processing Head. ~24,000 hours on the meter. Cummins 6 cylinder engine. New head gasket, new injectors, & all new pins and bushings with 1,500 hours on them. All the cylinders have been rebuilt. Undercarriage is @ 80%. The 2006 Rolly II Processing Head has a newer measuring wheel, lots of new hoses, a new saw box, bearings, and saw motor with 1,500 hours on them. Grab arms and feed rollers are all in good working order. New air ride seat & new front window. Enclosed cab has piloted joystick controls, heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timbco 415C 1998
$85,000
2000 Timbco 415D w/2014 Rolly II Head

2000 Timbco 415D w/2014 Rolly II Head

2000 Timbco 415D with 2014 Rolly II Head. Cummins 5.9 engine. Heat & A/C. Undercarriage is at roughly 60% to 65%.

Timbco 415D 2000
$62,500
Timbco 425EXT Harvester with a 2015 Rolly II Head

Timbco 425EXT Harvester with a 2015 Rolly II Head

2005 Timbco 425EXT Harvester with a 2015 Rolly II Head. This equipment has 8,100 hours, Cummins QSC 8.3L, runs and starts good, Espar pre heat system, strong hydraulics and drive motors, newer undercarriage, 24" double grouser pads. Tight boom, swing gear is in good working order. 2015 Rolly II Processing head with 1,250 hours, upgraded to a Woodland Eaton Computer system with books. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 425EXT 2005
$165,000
2001 Timbco 415D Processor

2001 Timbco 415D Processor

2001 Timbco 415D Processor. 8.3 Cummings engine, undercarriage is 65%, Kawasaki pump.

Timbco 415D 2001
$59,500
Timbco T415-D Harvester with a 2007 Rolly II Head

Timbco T415-D Harvester with a 2007 Rolly II Head

2002 Timbco T415-D Harvester with a 2007 Rolly II Head. This equipment has a Cummins 8.3 engine, runs and starts good, strong hydraulics, newer Kawasaki pump, Pre heat system, newer tilt motor on the head, reversing fan. Tight boom and swing gear, repinned and bushed. Double grouser tracks @ 30%. Head has new teeth, tight grab arms, rollers are in good working order. Heat , A/C, new pump and fan, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timbco T415-D 2002
$55,000
Timbco 415B Harvester with a 2 Roller Fabtek 18" Head *SOLD*

Timbco 415B Harvester with a 2 Roller Fabtek 18" Head *SOLD*

1996 Timbco 415B Harvester with a Fabtek Roller II 18" Head. This machine has a new undercarriage in Nov. 2017 - @ 95%, spring 2017: new seat, joysticks, front window, and LED lights on front . New Parker Denison pumps in 2015 and new pump drive in 2015. John Deere engine was rebuilt in 2012, 8,500 hours on it at that time, everything but the injectors and turbo, as the previous owner had just replaced them. Newer injectors and turbo on it in fall 2017. Has a revamped 2 roller Fabtek head 18" with on board L 90 Parker valves, High Country Tech computer. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timbco 415B 1996
$52,000
Timbco 415C Harvester with a Ponsse H73 Head

Timbco 415C Harvester with a Ponsse H73 Head

1998 Timbco 415C Harvester with a Ponsse H73 Head. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders. Undercarraige is in good working order, single grouser pads. Ponsse H73 head is solid, grab arms and feed rollers are all in good working order, measuring system works as it should, Ponsse 1000 computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 415C 1998
$52,500