Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 690ELC Processor

John Deere 690ELC Processor

1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 690ELC 1998
$69,500
Ponsse Ergo Harvester with a H73E Harvesting Head

Ponsse Ergo Harvester with a H73E Harvesting Head

2005 Ponsse Ergo Harvester with a H73E Harvesting Head. This machine has a Mercedes Benz engine, runs and starts good, 17,000 hours, pre-heat system, strong hydraulics and cylinders, new main pump at 13,500 hours, new joystick controls, old ones to go with as spares, tight boom, H200 crane, 710 tires with Eco track and a set of rear chains. Head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Ponsse Ergo 2005
$98,000
TimberPro TL735-B Processor with Logmax 7000XT Head *SOLD*

TimberPro TL735-B Processor with Logmax 7000XT Head *SOLD*

2014 TimberPro TL735-B Processor with Logmax 7000XT Fixed Head. This machine has a Cummins tier 3 300 HP engine, runs and starts good. 8,100 hours. New injectors, oil pan gasket, and rear engine seal. Pumps resealed and checked. Espar heat engine and hydraulics. Pump drive new input shaft and bearings. All regular maintenance done on schedule, oils changed every 1,000 hours, engine oil every 500 hours. Undercarriage is @ 50%, 24" double grouser pads. Processor head is stronger and more productive than other fixed heads. New Logmate 500 computer and head module. $40,000 in recent updates and work done on machine. New roto bearing on head, new saw motor, new saw bar holder, auto level option, new leveling cylinders, new A/C pump. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timberpro TL735-B 2014
$289,000
Timbco 420B Processor ***SOLD***

Timbco 420B Processor ***SOLD***

1994-95 Timbco 420B Processor with a Fabtek 4 Roller Head. This equipment has a Cummins engine, runs and starts good, strong hydraulics, few minor leaks, tight boom, front idler was replaced, decent roller and sprockets, 22" single grouser pads. Head has good feed rollers, grab arms, and knives, updated computer. Heat, A/C, and lights. Includes head, updated computer, manual, extra bars, and chains. Fabtek head can be purchased separately. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

Timbco 420B 1995
$29,900
Ponsse Processing Operation for Sale - Buffalo & Ergo

Ponsse Processing Operation for Sale - Buffalo & Ergo

Ponsse processing operation for sale. 2014 Ponsse Ergo Harvester and 2015 Ponsse Buffalo 8 Wheel DB Forwarder with timber sales available as well. *2014 Ponsse Ergo Harvester has a H7 Head. This equipment has the Mercedes Benz engine, runs and starts good, all maintenance has been done by Ponsse, 5,500 hours, Pre heater, strong hydraulics and cylinders, crane and squirt boom are in good working order, H7 head and measuring system are in good working condition, 700 tires with tracks. Heat, A/C, and lights. *2015 Buffalo 8 Wheel Forwarder. This machine has a Mercedes Benz engine, runs and starts good, all maintenance has been done by Ponsse, 5,500 hours, Pre heater, strong hydraulics and cylinders, crane and squirt boom are in good working order, K100 crane, 700 tires with tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machines are located in Northcentral USA.

Ponsse Ergo & Buffalo 2014
$Call for Price
TimberPro TN725C Processor with a Log Max 7000 Head

TimberPro TN725C Processor with a Log Max 7000 Head

2016 TimberPro TN725-C Processor with a Log Max 7000 Head. This machine has 2,700 hours as of August 30, 2018, Cummins QSC 8.3 - 300 HP engine, Caterpillar D6 size track frames with double-flanged rollers, 24" pads, 6' squirt boom, Lohmann final drives, Rexroth 2-speed motors. 2004 Log Max 7000 has had saw and feed wheel motors replaced, valve bank resealed, new knives, all cylinders repacked. Logmate 400 computer system. Carrier has fire suppression system, Espar pre-heater, deluxe air-ride seat with heat and lumbar support, heat, A/C, and LED lighting. Owner/Operator machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TN725C 2016
$345,000
John Deere 703JH Harvester w/ Waratah HTH622B Head *SOLD*

John Deere 703JH Harvester w/ Waratah HTH622B Head *SOLD*

2013 John Deere 703JH Harvester with a Waratah HTH622B Head. Hour meter reads ~5,100 hours, Pro Heat system, TimberRite measuring system. This machine is extremely clean and dry. No welding evident on the machine or the head. All panels open as they should. The machine is very tight and clean all around including the 622 head. Undercarriage is @ 75% 24" double grouser pads, tight controls, heat, A/C, and lights. Additional pictures available upon request. Contact Aaron @ Red Pine Equipment 218-720-0933 for more information or to set up a viewing of the machine. Machine is located in Northcentral USA. ***SOLD***

John Deere 703JH 2013
$259,000
NEW 2018 EcoLog 590E with LogMax 7000

NEW 2018 EcoLog 590E with LogMax 7000

NEW 2018 EcoLog 590E with a LogMax 7000 complete with a powerful D8 Volvo Penta engine. Unmatched stability along with zero worries in transportation and loaded with features too long to list. Call us for more information or stop in and see one!

EcoLog 590E 2018
$Call for Price
Valmet 911 Processor with a 965 Dangle Head

Valmet 911 Processor with a 965 Dangle Head

2001 Valmet 911 Processor with a 965 Dangle Head. This machine has a 5.9 Cummins engine, runs and starts good, 18,000 hours, newer valve cover gaskets, new batteries, new slew gear on cab, strong hydraulics and cylinders, new link where head connects. New computer screen, head will need some rewiring. Tight boom, bogies are in good order, tires are @ 40%. Heat, A/C needs a charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 911 2001
$44,500
Ponsse Ergo Processor

Ponsse Ergo Processor

2005 Ponsse Ergo Processor. This machine has a Mercedes Benz engine, runs and starts good, HN125 crane 73H head, strong hydraulics and drive system, tight boom and head, grab arms are in good working order, went through measuring system a year ago, cradles and axles are in good working order, tight center section, 710 tires @ 70% with tracks, front tires are @ 60%, Wabasto pre heater, fire suppression system, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2005
$125,900
Ponsse Ergo 8 Wheel Harvester ***SOLD***

Ponsse Ergo 8 Wheel Harvester ***SOLD***

2014 Ponsse Ergo 8 Wheel Harvester. This machine has 8,500 hours, runs and starts good, new turbo, H7 head was just re-pinned 2,000 hours ago. Has LED lights, Sit Right seat, stump spray, auto greasing system, C4 crane. Comes with one set of tracks. Machine is in good shape and ready to cut wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Ponsse Ergo 2014
$309,000
Timberjack 1270 Processor with HD758 Head ***SOLD***

Timberjack 1270 Processor with HD758 Head ***SOLD***

2003 Timberjack 1270 Processor with a HD758 Head. This equipment has a John Deere engine, runs and starts good, pre-heat system, 10,500 hours, strong hydraulics and drive, cab leveling is in good order, new sensors, tight boom, tight center section, head is in good working order, new saw motor, new alternator, updated computer system, decent rollers, good knives. 700 tires with tracks, 34's with chains, good glass, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 1270 2003
$119,500