Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 120 Processor ***SOLD***

John Deere 120 Processor ***SOLD***

2002 John Deere 120 Processor with a Fabtek 4 Roller Head. This machine has a newer engine and pumps, undercarriage is in good working condition, head is in good working order and has been reinforced at weak points, strong hydraulics and cylinders, Espar pre heater, fire suppression system, 18,000 frame hours, A/C, heat and gauges all work. Spare parts & undercarriage go with machine for an additional $5,000.00. ($61,500) Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 120 2002
$56,500
Rottne H20 Harvester with a Logmax 7000 Head

Rottne H20 Harvester with a Logmax 7000 Head

2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Rottne H20 2006
$162,000
Kobelco 260 Harvester with Logmax 7000XT Head

Kobelco 260 Harvester with Logmax 7000XT Head

2011 Kobelco 260 Harvester with a 2008 Logmax 7000XT Head. This machine runs and starts good, Cummins 6.7L engine, 4,300 hours on machine, 12,000 hours on head - has been gone through, strong hydraulics, tight boom, new Rotobec rotator on head, head has newer feed motor, new saw motor, repacked cylinders, Motomit computer in good order, new chains and sprockets, 24" pads, heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Kobelco 260 2011
$135,900
John Deere 653E Processor with a 2000 Fabtek 4 Roller Head

John Deere 653E Processor with a 2000 Fabtek 4 Roller Head

2000 John Deere 653E Processor with a 2000 Fabtek 4 Roller Head. This equipment has a new main pump, pilot pump, complete valve bank rebuild on both valve banks, new screens in hydraulic tank, new compensator spools in valves, lots of new hoses. Complete fully working spare head, and 8 extra complete valves, extra counters for measuring wheel, heat, A/C, pro heat system. Lights all around, rotary manifold rebuilt 500 hours ago, and new final drive 1,000 hours ago. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 653E 2000
$88,500
Hyundai 130 Processor with LogMax 750 Head

Hyundai 130 Processor with LogMax 750 Head

1999 Hyundai 130 Processor with a 2002 LogMax 750 Head. This equipment has a rebuilt head in 2015, brand new Cummins engine, runs and starts good, one year warranty on engine, 28" bar & chain, 26" cut, same as a 7000 LogMax, extra computer & feed rollers, undercarriage is @ 60%, strong hydraulics, tight boom, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hyundai 130 1999
$53,500
Komatsu PC228 Processor ***SOLD***

Komatsu PC228 Processor ***SOLD***

2005 Komatsu PC228 Processor with Log Max 7000 Head. This equipment has 9,000 hours, Komatsu engine, runs and starts good, strong hydraulics and pumps, new chains, new sprockets, new pads, new idlers about 1,200 hours ago, grab arms and rollers are in good working order, measuring system in good condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment. Machine is located in Northeast USA. ***SOLD***

Komatsu PC228 2005
$164,500
Timberjack 1270 Harvester with a 762C Head

Timberjack 1270 Harvester with a 762C Head

1999 Timberjack 1270 Harvester with a 762C Head. This machine has a 466E Navistar 6 cylinder engine, runs and starts good, 1,500 hours on a total engine rebuild, strong hydraulics, few minor leaks, tight pins and bushing, squirt boom is in good order, joystick controls are in good working condition, 700 tires a few nicks, grab arms and rollers are in working order, good glass. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1270 1999
$62,500
Hyundai 180 Carrier with Fabtek 4 Roller Head

Hyundai 180 Carrier with Fabtek 4 Roller Head

1998 Hyundai 180 Carrier with Forestry Package and Fabtek 4 Roller Head. This machine has newer computer wiring harness, newer pump. 8,600 hours, runs and starts good, tight boom and head, undercarriage is @ 90%, triple grouser, rebuilt Rex Roth pump, Cummings engine, heat and A/C, Wabasco heater, Sure Grip Control, feed roller and grab arms are in good order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Hyundai 180 1998
$65,000
Link Belt 210X2 Processor with Southstar QS500 Head

Link Belt 210X2 Processor with Southstar QS500 Head

2013 Linkbelt 210X2 Processor with Southstar QS500 Head. This machine has 9,691 hours, runs and starts good, head reseal & major cylinders have been done, dry machine, newer main hydraulic pump, undercarriage is in good working order, tight boom, head is in good working condition, heat, A/C, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Link Belt 210X2 2013
$198,500
CAT 501HD Processor with a Fabtek Head

CAT 501HD Processor with a Fabtek Head

2011 CAT 501HD Processor with a Fabtek Head. This machine has 8,600 hours, runs and starts good, Pro-Heat system, undercarriage was just gone through, new idlers, rollers, sprockets, and rails. Pads are decent, strong hydraulics, tight boom, head is in good working condition, computer is in good order, new Sure Grip handles, new jet fix bar tensioner. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 501HD 2011
$Call for Price
Timberking TK711HD Processor

Timberking TK711HD Processor

2006 Timberking TK711HD Processor with a Log Max 750 Dangle Head. This machine has a CAT 3126 engine, runs and starts good, Cat preheating system, 6,717 hours on meter, strong hydraulics and cylinders, undercarriage is in good working condition, 23.5" pads, Omron computer system, head and saw in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberking TK711HD 2006
$94,900
Kobelco SK200 Harvester

Kobelco SK200 Harvester

1998 Kobelco SK200 with the Waratah HTH20 Harvester Head. This machine runs and starts good, tight boom, undercarriage is in good working order, hoses on the attachment and the cylinder on the attachment has a leak, but the excavator runs strong. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

Kobelco SK200 1998
$34,900