Sort By:   GridGallery
Photo Title
Make Model Year Price
2009 John Deere 703JH with Waratah 622B Head

2009 John Deere 703JH with Waratah 622B Head

800 hrs on Main Saw Motor, Feed Roller Motor, Measuring System, has Top Saw, Good Undercarriage, Cold A/C, New Alternator & Batteries, Pumps have been resealed, ready to go to work. $125,000 Make Offer

John Deere 703JH 2009
$125,000
John Deere 1070D Harvester

John Deere 1070D Harvester

John Deere 1070D Harvester with H754 processor head. Year: 2005. Approximately 10,300 hours. This machine was professionally restored in 2015/2016. Only 300 hours since restoration and is in full working order. Tires are in good condition, tracks are in good condition, chains for the rear tires are included but are worn. Full operator and repair manuals included. Cab has working A/C and Heat. New windshield, and side windows, brakes, and many, many other parts. This harvester was owned and operated by Irwin Post since 2015. Restored at Nortrax in Springfield VT, they are familiar with this machine. Over $52,000 in new parts and labor. This Machine is very similar to the Deere 1270 harvester, just slightly smaller. Very productive machine. Asking price just reduced to $85,000.

John Deere 1070D 2005
$85,000
John Deere 703JH Harvester with a Waratah HTH622B Head

John Deere 703JH Harvester with a Waratah HTH622B Head

2013 John Deere 703JH Harvester with a Waratah HTH622B Head. Hour meter reads ~5,100 hours, Pro Heat system, TimberRite measuring system. This machine is extremely clean and dry. No welding evident on the machine or the head. All panels open as they should. The machine is very tight and clean all around including the 622 head. Undercarriage is @ 75% 24" double grouser pads, tight controls, heat, A/C, and lights. Additional pictures available upon request. Contact Aaron @ Red Pine Equipment 218-720-0933 for more information or to set up a viewing of the machine. Machine is located in Northcentral USA. ***MUST SELL! Seller is open to reasonable offers. ***

John Deere 703JH 2013
$275,000
John Deere 1270D Harvester

John Deere 1270D Harvester

2008 John Deere 1270D Harvester. 11,000 hours. Recent new injectors in engine which runs and starts good. H480 head has been rebuilt. 2 outer drive motors and one inner motor were rebuilt recently. Espar engine, hydraulic, and cab preheat system, strong hydraulics and cylinders, reman work pump and drive pump in the last 500 hours, tight boom and center section, stick and lift cylinders redone, bogies are in good working order, solid rear ends, 700 tires @ 50% with rear tracks, one set of chains. Feed rollers and grab arms are in good condition, Timbermatic HHM 300 computer. Heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1270D 2008
$144,900
John Deere 753J Processor with a CF20 4 Roller Head

John Deere 753J Processor with a CF20 4 Roller Head

2015 John Deere 753J Processor with a CF20 4 Roller Head. Hour meter reads 3,900 hours, runs and starts good, Pro heat system, upgraded computer, undercarriage is in good working order, strong hydraulics, tight controls, continuous rotation head, all in good working condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 753J 2015
$285,000
John Deere 703JH Processor w/ Waratah HTH 622B Head *SOLD*

John Deere 703JH Processor w/ Waratah HTH 622B Head *SOLD*

2014 John Deere 703JH with Waratah HTH 622B Head. This machine has 4,000 hours, Pro-Heat system, undercarriage is @ 90%, strong hydraulics and cylinders, no leaks, tight controls, computer and measuring system are all in good working order. Waratah 622B head has good feed rollers and grab arm, everything is in good working condition. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 703 JH 2014
$289,000
John Deere 490E Processor with Fabtek 4 Roller Head

John Deere 490E Processor with Fabtek 4 Roller Head

1996 John Deere 490E with Fabtek 4 Roller Head. This machine has a new 4 cylinder John Deere engine 2,000 hours ago. Cab has heat, A/C & Pro-Heater, many spare parts to go with, spare saw motor, new roller bearings, new chain, spare brain box. Well maintained machine, oil has been changed every 200 hours, tight controls, and always greased. Estimated 12,500 frame hours. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 490E 1996
$45,900
John Deere 1470D Processor with Waratah H290 Head

John Deere 1470D Processor with Waratah H290 Head

2008 John Deere 1470D Processor with Waratah H290 Head. Hour meter reads 10,151 hours, John Deere 6 cyl. engine, runs and starts good, pre-heat system, strong hydraulics and cylinders, drive system is in good working order, tight CH885 squirt boom, head has good feed rollers and grab arms, computer and measuring system are in good working condition, bogies and axles up to par, tight center section, 700 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 1470D 2008
$Call for Price
John Deere 803MH Processor

John Deere 803MH Processor

2016 John Deere 803MH Processor with a Waratah 623C Head. Hour meter reads 2,834 hours, runs and starts good, pre-heat system, 3 year - 5,000 hour warranty, strong hydraulics and drive system, tight boom and head, new knives under JD recall, 28" double grouser pads and rails have 800 hours on them, Extreme duty rails, head is in good working order, TimbeRite measuring systems, heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 803MH 2016
$445,000
John Deere 703JH Processor w/ Waratah 622B Processing Head

John Deere 703JH Processor w/ Waratah 622B Processing Head

2012 John Deere 703JH with a Waratah 622B Processor. This machine has 6,800 hours, runs and starts good, strong hydraulics, no leaks, undercarriage is @ 70%, 24" pads, double grouser, Timber rite measuring system, tight boom, head is in good working order, Espar pre-heater, heat, A/C, and new LED lights. Will entertain trade options for later model self propelled slasher unit. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 703JH 2012
$239,000
2010 John Deere 703JH Harvester

2010 John Deere 703JH Harvester

2010 JOHN DEERE 703JH 6081 5 CYL DEERE 181HP 622B WARATAH HEAD HEAT AND AIR

John Deere 703JH 2010
$265,000
John Deere 120 Processor ***SOLD***

John Deere 120 Processor ***SOLD***

2002 John Deere 120 Processor with a Fabtek 4 Roller Head. This machine has a newer engine and pumps, undercarriage is in good working condition, head is in good working order and has been reinforced at weak points, strong hydraulics and cylinders, Espar pre heater, fire suppression system, 18,000 frame hours, A/C, heat and gauges all work. Spare parts & undercarriage go with machine for an additional $5,000.00. ($61,500) Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 120 2002
$56,500