Harvesters/Processors For Sale

2016 Ponsse Scorpion King with H7 Harvester Head. Hour meter reads 8,200 hours. Mercedes engine starts and runs good. 710 Nokian tires have had balanced bogie tracks on them for the life of the machine. They are at 90%. Tracks are also in good shape. C50 crane is tight. The H7 harvesting head works as it should, roller and feed wheels are in great condition. This machine has auto grease, auto fuel fill pump (from ground), & a 120 gal. fuel tank. Also has a DAFO fire suppression system & Webasto preheater. Enclosed cab has heat, A/C, radio, and LED lights. Seat is heated, cooled, and lockable. Front, side, and skylight wipers. New swing bearing at 6,500 hours, and resealed pumps at 5,500 hours. This is a pre-emission, well-maintained, and well taken care of machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2007 Ponsse Beaver Harvester with H60 Processing Head. Hour meter reads 17,019 hours. Mercedes engine runs and starts good. Tires are at 50%. New turbo, alternators, windshield, and rear tire chains. Webasto preheater rebuilt winter of 2020. H60 Processing Head has new feed wheels. Saw bar hydraulic cylinder has been replaced and the rest of the cylinders on the head have been repacked. Bogie tracks included. Has heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2013 Komatsu 911.5 Harvester with a Valmet 370.2 Processing Head. Hour meter reads 8,400 hours. Sisu 6cyl engine, rotate and leveling cab in good working order. Machine is in excellent condition for age. Head is in very good condition. 710 bogey tires @ 75%. One set of tracks @ 50%. No leaks, very tight, very nice machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Valmet 911.3 Harvester with a 370.2 Head. This processor has a Sisu engine, runs and starts good, strong hydraulics and transmission, tight controls. Hour meter reads 16,500 hours, tight boom, new boom cylinder, newer rotator. Tight center section. 370.2 head is in good working order, measuring system working as it should. Recently updated computer system. Heat, A/C, and lights. Good glass. Working daily. Lots of new parts Installed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2007 Timberpro TB630 Comes with Tracks & Chains Head Options: Rolly II or Waratah 622B Clean Machine