Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet 430FXL Processor with a Rolly II Intermittent Head

Valmet 430FXL Processor with a Rolly II Intermittent Head

2009 Valmet 430FXL Processor with a Rolly II Intermittent Head. This machine runs and starts good, strong hydraulics and pumps, tight pins and bushings in the boom and head. Undercarriage is in good working order, single grouser pads. Rolly II head works good. Good glass. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 430FXL 2009
$Call for Price
Ponsse Ergo Harvester with H73 Head

Ponsse Ergo Harvester with H73 Head

2001 Ponsse Ergo Harvester with H73 Head. This machine has a newer good running Mercedes engine, runs and starts good, about 400 hours on the engine. Boom base was rebuilt, tight boom, strong hydraulics and cylinders, main pump was just resealed, center section is in working order, bogies are in good condition, 700 tires 30 with tracks, H73 head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2001
$88,500
Valmet 415EX Harvester with a Rolly II Head

Valmet 415EX Harvester with a Rolly II Head

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has a 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan, pumps are all in good order, & were all recently pressure checked, undercarriage is @ 95%. Rollers, idlers, sprockets, & 24” double grouser pads were all gone through. New computer DASA 4 one year ago, measuring system is accurate, valve bank was rebuilt 1 year ago on the head. Feed rollers and grab arms are all in good order, new head rotator, new main boom no cracks or welds. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 415EX 2007
$99,500
Fabtek FT-133 Harvester with a Fabtek 4 Roller Head

Fabtek FT-133 Harvester with a Fabtek 4 Roller Head

2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This machine has new pumps, new engine, 1,500 hours on both. Decent undercarriage. Final drives have been resealed, new oil cooler, 3rd measuring wheel, proheat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Fabtek FT-133 2000
$Call for Price
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2005 Ponsse Ergo Harvester with a H73E Harvesting Head. This machine has a Mercedes Benz engine, runs and starts good, hour meter reads 22,300 hours, Wabasto pre-heat system, strong hydraulics and cylinders, pumps are up to par, HN-125 crane, tight boom, squirt boom works as it should, Nokian 700/45/26 tires. Bogies are in good working order, head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2005
$85,000
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2007 Ponsse Ergo Harvester with a C-4 Crane and H-7 Head. This machine has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, tight boom and head, strong pumps, newer feed motors, delimbing knives are in decent condition, grab arms are in good order, strong cylinders, LED lights, bogies and axles are in good order. Webasto pre-heat system, computer and measuring system in good working condition, 710/45/26.5 tires @ 50%, heat, lights, and radio. A/C needs to be charge, Regular service and oil changes. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2007
$132,500
Ponsse Ergo 6 Wheel Harvester

Ponsse Ergo 6 Wheel Harvester

2013 Ponsse Ergo 6 Wheel Harvester with a H7 Head. This machine has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, C4 crane and squirt boom are in good working order. 710 tires, H7 head, measuring system is in good working condition, tight pins and bushings, good glass. Wabasto pre heat system, fire suppression. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2013
$319,000
Valmet 911.3 Harvester with a 370.2 Head

Valmet 911.3 Harvester with a 370.2 Head

2005 Valmet 911.3 Harvester with a 370.2 Head. This processor has a Sisu engine, runs and starts good, strong hydraulics and transmission, tight controls. Hour meter reads 16,500 hours, tight boom, new boom cylinder, newer rotator. Tight center section. 370.2 head is in good working order, measuring system working as it should. Recently updated computer system. Heat, A/C, and lights. Good glass. Working daily. Lots of new parts Installed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. REDUCED FROM 99,900.00

Valmet 911.3 2005
$89,900
Timberjack 1270C Processor with a 762 Head

Timberjack 1270C Processor with a 762 Head

2002 Timberjack 1270C Processor with a 762 Head. This machine has a Cummins engine, runs and starts good, 12,000 hours, strong hydraulics and transmission, solid boom base, squirt boom is in good working order, head has new hoses and knuckle. New pins and bearing on head. Timberjack 3000 TMC measuring system is in good working order, new wiring harness, solid bogies, 23.1 - 610 tires. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1270C 2002
$44,900
CAT 311 Harvester with a Fabtek 4 Roller Head

CAT 311 Harvester with a Fabtek 4 Roller Head

2001 CAT 311 Harvester with a Fabtek 4 Roller Head. This machine has a new CAT engine, runs and starts good, strong hydraulics and cylinders, newer undercarriage with 2,500 hours, 22" pads, tight boom. Fabtek 4 roller head has new spikes on rollers, new chains, grab arms and hoses are in good working order, Upton computer, 33" Jet fit bar. Heat, A/C, and lights, air ride seat, good glass, quick couplers. Forestry Package. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 311 2001
$68,500
Timberjack 990 Wheeled Processor

Timberjack 990 Wheeled Processor

1992 Timberjack 990 Wheeled Processor. This equipment has a newer Perkins 6 cylinder turbo, runs and starts good, newer pumps, strong hydraulics. Bogies have been gone through. Heat, A/C does not work. Lokomatic 90 measuring system, spare chains, bars, computers and many parts. Service and operators books available. Needs a little work on the functions on head. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 990 1992
$22,500
Valmet 415EX Harvester ***SALE PENDING***

Valmet 415EX Harvester ***SALE PENDING***

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has 9,700 hours, 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan. Pumps are all in good order, all were recently pressure checked. Undercarriage is @ 80%. Rollers, idlers, sprockets, 24" double grouser pads were all gone through. New Computer DASA 4 one year ago, measuring system is accurate, valve bank rebuilt 1 year ago on the head, feed rollers and grab arms are all in good order, new head rotator. New main boom, no cracks or welds. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SALE PENDING***

Valmet 415EX 2007
$122,500