Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberjack 1270C Processor with a 762 Head

Timberjack 1270C Processor with a 762 Head

2002 Timberjack 1270C Processor with a 762 Head. This machine has a Cummins engine, runs and starts good, 12,000 hours, strong hydraulics and transmission, solid boom base, squirt boom is in good working order, head has new hoses and knuckle. New pins and bearing on head. Timberjack 3000 TMC measuring system is in good working order, new wiring harness, solid bogies, 23.1 - 610 tires. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1270C 2002
$44,900
John Deere 1010B 6 Wheel Forwarder

John Deere 1010B 6 Wheel Forwarder

2000-01 John Deere 1010B 6 Wheel Forwarder. This machine has newer Cummins 4BT engine less then 1,500 hours, runs and starts good, newer pump, transmission was gone through when pump was done, tight center section, bearing and bushings were done on boom, 23.1x 26 front, 610 rear tires with chains. Heat, A.C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1010B 2000
$54,900
John Deere 843J Feller Buncher

John Deere 843J Feller Buncher

2008 John Deere 843J Feller Buncher. Hour meter reads 7,500 hours, runs and starts good, strong hydraulics and pumps. Recent center pins, loader arm pins and bushings. Joy stick controls, saw head is converted to joystick control. Webasto pre heating system. New bearing in the disk 300 hours ago. FD 22B Head in good working order, heat, A/C, and lights. 67x34.00 Tires - front are @ 90%, rear tires are @ 50%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 843J 2008
$69,900
1999 Fabtek 346B 6wd Forwarder

1999 Fabtek 346B 6wd Forwarder

John Deere 4045T engine new 2 years ago. Powershift transmission. Loader has squirt boom with SuperGrip 360 bucket. Joystick controls. Tires are 23.1X26 on front & 600mm on rear.

Fabtek 346B 1999
$48,000
Parting out TimberPro 735B

Parting out TimberPro 735B

Parting out this 2010 TimberPro 735B Feller Buncher. We also have parts for the following TimberPros: 620E , 630B , 725B & 830.

Timberpro 735B 2010
$Call for Price
Barko 775B Feller Buncher with a 22" Hot Saw

Barko 775B Feller Buncher with a 22" Hot Saw

Description: 1995 Barko 775B Feller Buncher with a 22" Hot Saw. Unit has a 8.3L Cummins with 3000 hours on complete overhaul with strong hydraulics. Hot saw has new bearings, spidle, blade and drive motor has been overhauled. Drive motors on machine has also been redone with a new pump drive gear box. Tires 40 to 50%. Set of double diamond ice chains. Ready To Work.

Barko 775B 1995
$17,900
2003 Franklin Q70 Skidder

2003 Franklin Q70 Skidder

2003 FRANKLIN Q70 SINGLE ARCH GRAPPLE CABLE SKIDDER 6 CYL CUMMINS AUTOMATIC 28L-26 RUBBER TWO NEWER TIRES ON REAR

Franklin Q70 Unknown
$29,500
John Deere 648H Skidder

John Deere 648H Skidder

2008 John Deere 648H Dual Arch Grapple Skidder. This machine has about 2,500 hours on a rebuilt engine, strong hydraulics and transmission, tight center section, grapple and arch are tight, axles and cradles are all in good order, cylinders and hoses are in good working condition, 30.5 x 32 tires @ 50% with Bear claw chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648H 2008
$51,500
1990 Timberjack 380B Skidder

1990 Timberjack 380B Skidder

1990 TIMBERJACK 380B DUAL ARCH GRAPPLE SKIDDER WITH WINCH 6 CYL CUMMINS AUTOMATIC 24.5-32 RUBBER

Timberjack 380B 1990
$38,500
CAT 311 Harvester with a Fabtek 4 Roller Head

CAT 311 Harvester with a Fabtek 4 Roller Head

2001 CAT 311 Harvester with a Fabtek 4 Roller Head. This machine has a new CAT engine, runs and starts good, strong hydraulics and cylinders, newer undercarriage with 2,500 hours, 22" pads, tight boom. Fabtek 4 roller head has new spikes on rollers, new chains, grab arms and hoses are in good working order, Upton computer, 33" Jet fit bar. Heat, A/C, and lights, air ride seat, good glass, quick couplers. Forestry Package. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 311 2001
$68,500
Timberjack 990 Wheeled Processor

Timberjack 990 Wheeled Processor

1992 Timberjack 990 Wheeled Processor. This equipment has a newer Perkins 6 cylinder turbo, runs and starts good, newer pumps, strong hydraulics. Bogies have been gone through. Heat, A/C does not work. Lokomatic 90 measuring system, spare chains, bars, computers and many parts. Service and operators books available. Needs a little work on the functions on head. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 990 1992
$22,500
Valmet 415EX Harvester with a Rolly II Head

Valmet 415EX Harvester with a Rolly II Head

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has 9,700 hours, 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan. Pumps are all in good order, all were recently pressure checked. Undercarriage is @ 80%. Rollers, idlers, sprockets, 24" double grouser pads were all gone through. New Computer DASA 4 one year ago, measuring system is accurate, valve bank rebuilt 1 year ago on the head, feed rollers and grab arms are all in good order, new head rotator. New main boom, no cracks or welds. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SELLER IS OPEN TO REASONABLE OFFERS.***

Valmet 415EX 2007
$122,500