Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 120 Processor with Fabtek Head

John Deere 120 Processor with Fabtek Head

Woods ready processor. Just came off of a job. Really good undercarriage. Runs really good. Very reliable machine. Could use some hoses. Roller measuring system. Pump done about 500 hours ago. Good glass. Good heat. Valve banks were resealed. Pretty straight for the year. 2 speed tracks works. Have a lot of spare bars to go with. Also have spare bar mount pieces and auto tensioner. Could use a few things on it. Would seriously consider trade for small firewood processor. Would seriously consider trade for small sawmill. Thank you for looking

John Deere 120 2001
$45,000
CASE 1187C Feller Buncher

CASE 1187C Feller Buncher

1988 CASE 1187C Feller Buncher. This machine has a Cummins 8.3 engine, runs and starts good, 22" Rotto Saw Intermittent 40 degree tilt, newer undercarriage, tight pins and bushings. Runs good, hour meter reads 7,270 hours. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

CASE 1187C 1988
$24,900
John Deere 1470E Harvester with a IT 4 480C Head

John Deere 1470E Harvester with a IT 4 480C Head

2014 John Deere 1470E Harvester with a IT 4 480C Head. This equipment has a John Deere engine, hour meter reads 10,400 hours, runs and starts good, strong hydraulics and cylinders, tight boom. Head is in good working order, very clean machine all the extras. Tracks and Chains available. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 1470E 2014
$265,000
Timbco 425 with 750 Log Max

Timbco 425 with 750 Log Max

Timbco 425 very good condition new leveling pins and pushings new cylinder packing's. Many new parts. Under carriage 80% Logmax 750 recently replaced feed motors, Willing to travel to train new operator on machine.

Timbco 425 1998
$38,000
CASE 903B with ProPac 453 Delimber

CASE 903B with ProPac 453 Delimber

1998 Case 9030B with ProPac 453 Delimber. This equipment has a Cummins engine, runs and starts good, Wabasto pre-heater, pumps have been redone, strong hydraulics and cylinders, lift cylinders have just been repacked, new bearings on the rollers, straight boom knives in good working order, new grab arms, newer injection pump. Heat and lights. A/C may need a charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CASE 903B 1998
$64,500
Komatsu 931.1 Harvester with Komatsu C144 Head

Komatsu 931.1 Harvester with Komatsu C144 Head

2015 Komatsu 931.1 Harvester with Komatsu C144 Head. Hour meter reads 8,850 hours, Sisu 6cyl engine, runs and starts good, strong hydraulics and transmission, tight boom Komatsu C144 head in good working order, fire suppression. All the extras, clean machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Komatsu 931.1 2015
$215,000
Ponsse Buffalo Forwarder

Ponsse Buffalo Forwarder

2013 Ponsse Buffalo 8WD Double Bunk Forwarder. This equipment has a Mercedes Benz engine, runs and starts good, hour meter reads 10,864 hours, strong hydraulics and transmission, K 90 crane, tight boom and grapple, 2 set of tracks, can sell without tracks, machine is in good condition, 710 tires @ 80%. Pre Heater, led lights, new grab, side wipers. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Ponsse Buffalo 2013
$175,000
John Deere 1910E Forwarder

John Deere 1910E Forwarder

2016 John Deere 1910E 8WD Double Bunk Forwarder. This equipment has a John Deere 249 HP engine, runs and starts good, hour meter reads 6,662 hours, engine water pump was replaced @ approximately 5,800 hours, Wabasto pre heater, strong hydraulics and transmission. Cab rotation. All bogies are in good working order, tight boom, squirt boom is in good condition. Recent repairs last 200 hours, Cabin heater control module replaced, rear differential has been rebuilt, fuel injection system flush, A/C repaired and recharged. Cab has heat, A/C, and LED light package. 780 tires with rough terrain track all around. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

John Deere 1910E 2016
$259,000
John Deere 703JH Processor w/ Waratah 622B Processing Head

John Deere 703JH Processor w/ Waratah 622B Processing Head

2012 John Deere 703JH with a Waratah 622B Processor. Hour meter reads 9,000 hours, runs and starts good, strong hydraulics, no leaks, undercarriage is @ 70%, 24" pads, double grouser, Timber rite measuring system, tight boom, head is in good working order, Espar pre-heater, heat, A/C, and new LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***Seller is open to reasonable offers.***

John Deere 703JH 2012
$149,900
CAT 545C Skidder

CAT 545C Skidder

2013 CAT 545C Dual Arch Grapple Skidder. Hour meter reads 8,327 hours, runs and starts good, strong hydraulics and automatic transmission. Many recent updates. Repair history within the last 200 hours: grapple 360 rotate had new bearings put in and rotate motor rebuilt, grapple brake rebuilt, new grapple control handle, replaced one steering cylinder with new one. Within the last 500 hours: new fuel injection pump and three injectors, hydraulic tuneup. re-bushed blade pivot. 35.5 x 32 tires @ 50% with ice chains all around. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

CAT 545C 2013
$119,500
Iron Mule 4500 Forwarder

Iron Mule 4500 Forwarder

1980 Iron Mule 4500 Single Bunk Forwarder. This equipment has a 3 cylinder Perkins engine rebuilt 200 hours ago, new clutch, decent center section. Gafner Loader, strong hydraulics, few minor leaks, 23.1 tires with Bear Claw chains and a spare tire. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Iron Mule 4500 1980
$15,500
Komatsu PC200-LC with a ProPac 453 Delimber

Komatsu PC200-LC with a ProPac 453 Delimber

2005 Komatsu PC200-LC with a ProPac 453 Delimber and Circular Saw. This delimber has a Komatsu engine, runs and starts good strong hydraulics, decent undercarriage, straight boom, good cables, decent knives, straight saw blade, good teeth. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC200-LC 2005
$62,500