Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse HS10 Cobra Harvester w/ Ponsse H60 Big Wheel Head

Ponsse HS10 Cobra Harvester w/ Ponsse H60 Big Wheel Head

2000 Ponsse HS10 Cobra Harvester with a Ponsse H60 Big Wheel Head. This equipment has an estimated 15,000 hours, CAT 3116 engine, runs and starts good, very clean for age. One set of tracks @ 50%, LoPro 700 Tires HN125 boom, strong hydraulics, tight boom, bogies are in good working condition. Pre heater, heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse HS10 2000
$55,000
Timberjack 1270 Harvester

Timberjack 1270 Harvester

1995 Timberjack 1270 Harvester with a Spare Parts Machine. This equipment has just under 19,000 hours, runs and starts good. Perkins engine in both machines. Has chains for the back axle, two spare rear tires and rims on the parts machine. No front tires or rims, bogies are beside it along with the boom and spare head and misc. parts. 2 spare computers and spare locomatic 90 screen for in the cab. A/C and heat works last in the woods 3 months ago. Have basically a complete spare parts machine most of it is disassembled. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 1270 1995
$Call for Price
Prentice 2570 Feller Buncher ***SOLD***

Prentice 2570 Feller Buncher ***SOLD***

2011 Prentice 2570 Feller Buncher. Set of Dual Tires and Rims Front and Back included. Hour meter reads 6,500 hours, Cummins 5.9, runs and starts good, strong hydraulics and cylinders, pumps are in good condition, new injection pump, tight center pins and bushings, good glass. SH56 head in good working order, new disc, 28L x 26 tires @ 75% or better with 23.1 duel tires and rims. Heat, A/C, and lights. Good soft ground machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Prentice 2570 2011
$59,000
TimberPro TL-725B Harvester with a Rolly II Head ***SOLD***

TimberPro TL-725B Harvester with a Rolly II Head ***SOLD***

2013 TimberPro TL-725B Harvester with a Rolly II Head. Hour meter reads 7,500 hours, Cummins 8.3 engine, runs and starts good, 1,000 hours on a new pan gasket and main seal, flex plate was done at the same time, Espar pre heat system, fire suppression system. Strong hydraulics, new main pump 1,200 hours ago, drive pumps in good working order, new swing bearing and trunnion. Rolly II head has more hours then the machine but is in good working order, grab arms and both bottom and topping saw are in good working condition. Good glass, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberpro TL-725B 2013
$149,900
John Deere 1210E Forwarder

John Deere 1210E Forwarder

2015 John Deere 1210E Double Bunk Forwarder. This machine has a John Deere engine, runs and starts good, high torque at low RPM, fuel efficient and powerful. Strong hydraulics and drive system, tight boom and grapple. Ergonomic armrests. TimberMatic F-09, fingertip control of loader functions, reversible hydraulic-driven fan, centralized checkpoints, heavy-duty bogie axles. TimberLink monitoring system. Tracks, heat, A/C, & LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1210E 2015
$214,900
Tree Farmer C5 Single Bunk Forwarder

Tree Farmer C5 Single Bunk Forwarder

1984 Tree Farmer C5 Single Bunk Forwarder. This equipment has a Deutz 5 cylinder engine, hour meter reads 3500 hours, strong transmission, newer orbit motor, tight boom and grapple, strong hydraulics, few minor leaks, 23.1 x 26 tires, 1 set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Tree Farmer C5 1984
$24,000
Timbco 415B Harvester with a Newer Rolly II Head ***SOLD***

Timbco 415B Harvester with a Newer Rolly II Head ***SOLD***

1996 Timbco 415B Harvester with a Newer Rolly II Head. This equipment has a Cummins 5.9 engine, runs and starts good, strong hydraulics ans cylinders. Undercarriage is in good working order, double grouser pads. Rolly II head is solid, grab arms and feed rollers all in good working order measuring system works as it should, Woodland computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Timbco 415B 1996
$49,500
John Deere 1010E 6 Wheel Forwarder ***SOLD***

John Deere 1010E 6 Wheel Forwarder ***SOLD***

2011 John Deere 1010E 6 Wheel Forwarder. This machine has new head and injectors, top end was completely redone, EGR cooler, turbo. Wabasto pre heat system. Strong hydraulics and cylinders, tight boom and base, squirt boom is in good working order, grapple has been changed out for a 260 SureGrip grapple. Tight pins and bushings. 710 tires @ 75% with New Double Diamond chains, also has a set of tracks. Heat, A/C, and LED lights. Well Maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

John Deere 1010E 2011
$135,000
Valmet 503 Harvester with a 16" Head

Valmet 503 Harvester with a 16" Head

1989 Valmet 503 Harvester with a 16" Head. hour meter reads 6,800 hours, 4 cylinder John Deere engine, runs and starts, will need some injectors soon, new right final drive, new joysticks, quick couplers. 23.1 x 26 tires set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 503 1989
$13,500
John Deere 548GII Grapple Skidder with a Winch

John Deere 548GII Grapple Skidder with a Winch

1999 John Deere 548GII Grapple Skidder with a Winch. This equipment runs and starts good, new engine @ 9,000 hours, 12,300 total hours. Strong hydraulics and transmission, tight center section, winch is in good working order, 28Lx26 tires, bear claw chains, heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 548GII 1999
$59,900
2014 MORBARK 50/48B DRUM CHIPPER

2014 MORBARK 50/48B DRUM CHIPPER

2014 MORBARK 50/48B DRUM CHIPPER CAT V-12 1050HP PUT IN SERVICE APRIL 2015 ONE OWNER ONE OPERATER CAB WITH LOADER HEAT AND AIR NEW CLAMPS HOLDERS AND ALL NEW HARDWARE ADVANTAGE 3 DRUM

Morbark 50/48B 2014
$399,000
Ponsse Ergo 8 Wheel Harvester  ***SOLD***

Ponsse Ergo 8 Wheel Harvester ***SOLD***

2014 Ponsse Ergo 8 Wheel Harvester with a Ponsse H8 Harvesting Head. Hour meter reads 9,700 hours, runs and starts good, strong hydraulics and cylinders, updated pump drive coupler, tight pins and bushings, tight C5 crane. New comfort grip controls at 9,000 hours. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. ***SOLD***

Ponsse Ergo 2014
$339,500