Sort By:   GridGallery
Photo Title
Make Model Year Price
Hydro-Ax 511EX Feller Buncher

Hydro-Ax 511EX Feller Buncher

1997 Hydro-Ax 511EX Feller Buncher. This unit has around 7500hrs, John Deere engine, runs and starts good, strong hydraulics, newer pump, solid center section, head is a Waratah 22" head in good working condition, bottom pins have a little play, newer steer box, 34.00x25 tires 60 to 70%, heat a/c and lights. Contact Erik @ Red Pine Equipment 218-720-0933.

Hydro-Ax 511EX 1997
$42,500
Rottne H20B Harvester with 761LF Processing Head ***SOLD***

Rottne H20B Harvester with 761LF Processing Head ***SOLD***

2014 Rottne H20B Harvester with ~2,900 hours. 761LF processing head. Carrier and head are in excellent condition. Leveling and rotating cab. RK 200 Crane. 750/45-30.5 bogie tires @ 80% with Eco tracks @ 90%, 700/70-34 rear tires. All tires have been fluid filled. This machine was factory set with the stump spray system, central lubrication, Espar engine/hydraulic/cab pre-heater, and sun screens on all windows. All pins and bushings on the machine are very tight, the sheet metal is straight, all lights are present. This machine has been very well cared for and it shows with the condition. Check out the videos below and call us for further specs and information. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Rottne H20B 2014
$Call for Price
Hydro-Ax 470 Feller Buncher ***SOLD***

Hydro-Ax 470 Feller Buncher ***SOLD***

2004 Hydro-Ax 470 Feller Buncher. This machine has 8,000 hours, runs and starts good, newer Cummins engine about 700 hours ago, new radiator, tight center section, strong hydraulics, grab arms and cylinders in good order. Disc has a few cracks will need attention soon, 28Lx26 tires @ 50%, tight joystick controls, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA. ***SOLD***

Hydro-Ax 470 2004
$42,500
Prentice 210D Loader with Adjustable Buck Saw

Prentice 210D Loader with Adjustable Buck Saw

1984 Prentice 210D Loader with Adjustable Buck Saw. This equipment has a rebuilt John Deere engine, runs and starts good, has paper work, strong hydraulics and cylinders, boom has a little play not bad, newer 360 grapple, carrier and down riggers in good working condition, heat, and lights. CTR adjustable buck saw has a 52" bar & butt plate. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Prentice 210D 1984
$18,500
2008 John Deere 1270D Harvester

2008 John Deere 1270D Harvester

2008 JOHN DEERE 1270D WHEELED HARVESTER 6 CYL DEERE HYDRASTATIC DRIVE 480C HEAD 600 RUBBER

John Deere 1270D 2008
$210,000
John Deere 640GIII Skidder

John Deere 640GIII Skidder

2003 John Deere 640GIII Cable Skidder. This machine has a rebuilt engine a year and a half ago, new center pin at 100%, strong hydraulics, all leaks and hoses just gone through, new bottom drive shaft, rebuilt front end, transmission just serviced, new wiring harness, extra transmission goes with, 23.1x26 tires @ 25-30% with chains and Eco tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 640GIII 2003
$52,000

Morbark 40/36 Chipper

2009 Morbark 40/36 Chipper. This chipper has a new drum, John Deere 600 HP engine, 3,500 hours, strong hydraulics. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Morbark 40/36 2009
$Call for Price
Morbark 40/36NCL Drum Chipper ***SOLD***

Morbark 40/36NCL Drum Chipper ***SOLD***

2014 Morbark 40/36NCL Drum Chipper, This chipper has a CAT C-18 T2 765 HP engine, Platinum Engine Warranty until 1/16/2020, or 10,000 Hours. Excellent Condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***SOLD***

Morbark 40/36NCL 2014
$Call for Price
Timberjack 360 Cable Skidder ***SOLD***

Timberjack 360 Cable Skidder ***SOLD***

1993 Timberjack 360 Cable Skidder. This machine has 7,633 hours, 5.9 Cummins engine rebuilt 2,000 hours ago, strong hydraulics and transmission, tight center section, strong winch, 23.1x26 tires, back tires are @ 90%, front tires are @ 50%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Timberjack 360 1993
$46,500

John Deere 648H Skidder

2010 John Deere 648H Single Arch Grapple Skidder with Winch. This machine has 7,800 hours, runs and starts good, strong hydraulics, tight pins and bushings all around. New 28LX26 rims & tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648H 2010
$117,500
Eco Log 550B Processor with a Logmax 5000 Head

Eco Log 550B Processor with a Logmax 5000 Head

1998 Eco Log 550B Processor with a Logmax 5000 Head. This processor has many new parts on the Logmax head, new main pump in 2013, rebuilt pump drive assembly this spring, both drive pumps have been gone through, all fluids changed this spring, four chains, tires are @ 70%, new crank bearings this spring and new piston rings, 15,000 hours. Machine is only used for 6 months of the year for the past three years, seasonal operation. Comes with spare hoses, filters, and any other misc. parts associated with it, also has brand new parts for the head. A/C does not work, heater does, has a 24 volt system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Eco Log 550B 1998
$106,500
CAT 553 Feller Buncher

CAT 553 Feller Buncher

2007 CAT 553 Feller Buncher. This machine has brand new hoses on everything, runs good, 9,800 hours, A/C and heat work, has joystick steering, needs new teeth, nice tight machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***REDUCED FROM $62,500.00***

CAT 553 2007
$58,000