Sort By:   GridGallery
Photo Title
Make Model Year Price
Tigercat 822C Feller Buncher

Tigercat 822C Feller Buncher

2006 Tigercat 822C Feller Buncher. This unit has a New Cummins engine 2,500 hours ago, updated undercarriage and 30"pads. Strong hydraulics and cylinders, drive motors are in good order, tight boom and head. Head is a Tigercat 22" 220 degree tilt. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Tigercat 822C 2006
$82,500
CAT 564 Forwarder

CAT 564 Forwarder

2006 CAT 564 Double Bunk Forwarder. This forwarder has a Perkins 6 cylinder engine, runs and starts good, new injectors, strong hydraulics and transmission, tight center section, bogies are in good working order. Tight boom, squirt working as it should, 2013 SureGrip grapple, 710 tires with tracks - also has a spare, good brakes, heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 564 2006
$89,500
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2006 Ponsse Ergo Harvester. This machine has ~17,300 frame hours, runs and starts good. Engine has been recently gone through, including - new block, rebuilt head and injectors, new drive coupler, and new input shaft. Strong hydraulics, HN 200 Crane, H73E head, both in good working condition, new delimbing knives, auto lube system. New crane swing motor and resealed drive 500 hours ago, one set of tracks @50%, set of chains @ 70%, heat, A/C. Machine is in good condition for age and hours. Seller is open to trade on forwarder, dozer, log truck or cable skidder. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2006
$102,500
Vermeer BC1400 Chipper

Vermeer BC1400 Chipper

2006 Vermeer BC1400 Chipper. This equipment has a 14” capacity. This self-feeding drum style chipper is Powered by a Caterpillar turbo diesel engine, runs and starts good, 1,347 hours, been cleaned, serviced, fully tested, knives in good order with extras. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Vermeer BC1400 2006
$24,500
Precision 2366 23 Whole Tree Chipper

Precision 2366 23 Whole Tree Chipper

2006 Precision 2366 23” Whole Tree Chipper. This machine has 9,200 hours, CAT 850 HP engine, strong hydraulics, tight pins and bushings in machine and boom, replaced shaft, have spare parts and 130 knives to go with, heat, A/C, three axle undercarriage in good condition, DOT. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northcentral USA. ***Owner must sell.***

Precision 2366 2006
$75,000
John Deere 648GIII Skidder ***SOLD***

John Deere 648GIII Skidder ***SOLD***

2006 John Deere 648GIII Dual Arch Grapple Skidder with Winch. This skidder runs and starts good, strong hydraulics and cylinders, few minor leaks, DD transmission, pins and bushings will need some attention, new 30.5x32 tires. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

John Deere 648GIII 2006
$38,500
2006 John Deere 1270D with a 2013 LogMax 6000

2006 John Deere 1270D with a 2013 LogMax 6000

2006 1270D with a 2013 LogMax 6000. Machine has 19,400 hours, is in good shape with many updates already done and back from rent several months ago. Older machine taken care of, with a newer head and priced right at $95,000 (reduced from $125,000)!!

John Deere 1270D 2006
$95,000
2006 John Deere 748GIII

2006 John Deere 748GIII

Good machine that has been maintained and is ready for work. Includes brand new spare tire. Machine is located in Thunder Bay, Ontario, Canada. Contact Patrick at 807-621-1158. 

John Deere 748GIII 2006
$72,000
John Deere 748GIII Skidder with Winch ***SOLD***

John Deere 748GIII Skidder with Winch ***SOLD***

2006 John Deere 748GIII Dual Arch Grapple Skidder with Winch. This skidder runs and starts good, strong DD transmission was rebuilt 3,000 hours ago, strong hydraulics and cylinders, few minor leaks. Arch has been line bored, center is decent, newer grapple tines, has new dash. 30.5x32 tires @ 90% with chains @ 30%, rear are dual rims. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 748GIII 2006
$47,900
Ponsse Ergo Harvester with a C-4 Crane and H-7 Head

Ponsse Ergo Harvester with a C-4 Crane and H-7 Head

2006 Ponsse Ergo Harvester with a C-4 Crane and H-7 Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive, tight boom and head, resealed pumps, boom chains, feed motors, updated delimbing knives, updated roll arms, most cylinders replaced, Taimi live swivels, LED lights, bogies and axles are in good order, pre-heat system, computer and measuring system, 710 tires, tracks like new @ 90%, heat, A/C, and lights. Regular service and oil changes. Seller is open to reasonable offers and trades. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2006
$139,000
2006 Timberking TK458

2006 Timberking TK458

Good running condition. 13,973 hours Perkins engine. Loader works well, some new hoses and hydraulic leaks repaired. Unit is serviced and ready to work.

Timberking TK458 2006
$120,000
2006 Link-Belt 240 LX Delimber

2006 Link-Belt 240 LX Delimber

Unit in Excellent Condition! 4400 Denharco Delimber with topping knives, winch drive. New winch motor and bottom rollers 500 hours ago. Recent Work Order completed for $25000.

Link Belt 240 LX 2006
$130,000