Featured in Logging Equipment

Valmet/Timbco 445 EXL Feller Buncher w/ Quadco 22B 40° Head

$99,500

Sort By:

Photo	Title	Make	Model	Year	Price
	Ponsse Ergo with Ponsse H73E Harvester Head 2005 Ponsse Ergo with Ponsse H73E Harvester Head. Hour meter reads 24,285 hours. Newer Opti 4G computer is integrated for GPS. Newer head pump input seal 150 hours ago. Heated seat. Boom and center are good. Lots of parts included, bars, chains, counter sensor, joystick buttons & switches. Like new tracks are available for an additional cost. Webasto preheat. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2005	$38,500
	Valmet 415EX with Log Max 7000C Harvesting Head 2005 Valmet 415EX with Log Max 7000C Harvesting Head. Hour meter reads 17,761 hours. 24" double grouser pads, undercarriage is estimated at 95%. Brand new undercarriage less than 1,000 hours. Log Mate 510 computer. Proheat preheater. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Valmet	415EX	2005	$57,500
	Timbco 425EXL with 2015 Rolly II Processing Head 2005 Timbco 425EXL with 2015 Rolly II Processing Head. Hour meter reads 9,257 hours. Cummins 8.3L engine was fully rebuilt at 8,900 hours. 24" single grouser pads, newer undercarriage estimated at 90%. 2015 Rolly II processing head is in good condition, measuring system is in working order. Woodland computer system, heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Timbco	425 EXL	2005	$135,000
	Valmet 415EX with Log Max 7000XT Harvesting Head 2005 Valmet 415EX with Log Max 7000XT Harvesting Head. Hour meter reads 10,384 hours, frame hours are 20,031. 24" double grouser pads, undercarriage is estimated at 90%. Log Mate 510 computer. Espar preheater. Heat, A/C, radio, and LED light bars. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Valmet	415EX	2005	$82,500
	Valmet/Timbco 445 EXL Feller Buncher w/ Quadco 22B 40° Head 2005 Valmet/Timbco 445 EXL Feller Buncher with Quadco 22B 40° Head. Hour meter reads 10,800 hours. New complete Berco undercarriage, 24" single grouser pads. Newer saw disk on Quadco head. Cummins 8.3 and main pump replaced 1,700 hours ago. Tight machine throughout. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Timbco	445 EXL	2005	$99,500
	John Deere 643J Feller Buncher 2005 John Deere 643J Feller Buncher. Hour meter reads 13,207 hours, John Deere engine, runs and starts good, strong hydraulics and drive system. Tight center section, 22" head grab arms and cylinders are in good working order, straight blade, & good teeth. Joystick controls. 30.5 x 32 tires @ 50%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	643J	2005	$32,500
	Ponsse Ergo Harvester with Ponsse H7 Head 2005 Ponsse Ergo Harvester with Ponsse H7 Head. Refurbished in 2014. Hour meter reads 13,158 hours. 710/45-26.5 tires are estimated at 50%, rears are estimated at 60%, includes a set of tracks and chains. Newer used bearing in the crane, new bushings where it pins to the frame. Ponsse rebuilt the gearbox for the crane, and rebuilt rear-end in the bogies less than a year ago. Clutch in the gearbox between the engine and clutch was replaced, with new seals in the hydraulic pumps. Webasto preheater. Comfort controls. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2005	$110,000
	Ponsse Ergo Harvester with H7 Harvesting Head 2005 Ponsse 6 Wheeled Ergo with Ponsse H7 Harvesting Head. House meter reads ~10,850 hours. Refurbished in 2016. 710/45-26.5 tires on the bogies are estimated at 80%, other two tires are estimated at 70%. Includes a set of tracks and chains. Webasto preheater, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2005	$109,900
	John Deere 1070D with 754 Harvesting Head 2005 John Deere 1070D with 754 Harvesting Head. Hour meter reads 15,500 hours. John Deere 6068 engine. 754 harvesting head and Timbermatic computer. Espar preheater. A few hoses and seals may need to be replaced. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	1070D	2005	$56,500
	John Deere 748GIII Skidder 2005 John Deere 748GIII Dual Arch Grapple Skidder. This skidder has the Direct Drive transmission, all new 30.5 x 32 tires, tight pins and bushings, strong hydraulics. 2,070 hours on engine rebuilt in 2016, 2,000 hours on new differential in 2017. Clean, well maintained, and on a regular service schedule. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	748GIII	2005	$49,900
	Serco 170A Loader with Siiro 60" Slasher 2005 Serco 170A Loader with Siiro 60" Slasher. Hour meter reads 10,928 hours. John Deere 6068 engine. Loader is tight & dry. Savage carrier. Good tires and all outriggers work. Dead heel. Rebuilt bucket. New batteries and Webasto preheater. New pins and bushings and repacked the main lift cylinder. Siiro 60" slasher, good blade & tires. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Serco	170A	2005	$39,500
	Timbco 415EX with Valmet 370E Processing Head 2005 Timbco 415EX with Valmet 370E Processing Head. Frame hours are unknown, hour meter reads 6,508 hours. Sisu engine starts and runs good. Reversing fan in working order, new alternator. 24" double grouser pads, undercarriage is estimated at 85%. Pins, bushings, and swing bearing are tight. Squirt boom. Valmet 370E processing head is in good working order, one feed wheel motor could be resealed. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Timbco	415EX	2005	$45,000