Sort By:   GridGallery
Photo Title
Make Model Year Price
Tigercat 726B Feller Buncher

Tigercat 726B Feller Buncher

2000-01 Tigercat 726B Feller Buncher. This buncher has a Cummins 8.3 engine, runs and starts good, strong hydraulics and cylinders, tight center section, head and grab arms are in good working order, 67.00 tires - new, full chains. This was a mower machine. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Tigercat 726B 2000
$52,590
2000 Timbco 425-D Harvester w/ Keto 800 head

2000 Timbco 425-D Harvester w/ Keto 800 head

Owner-Operator. Purchased for storm damage cleanup. Planned on keeping, but machine does not fit my current markets. All oils and coolant drained and changed (finals, hydraulic, engine, gearbox, swing drive). All filters changed and complete set of filters to go with. Rotate Motor on keto head resealed. All hydraulic hoses under cab replaced. New heater hoses, New Batteries, New disconnect switch, replaced one hand control valve, Replaced 2 of 4 Holding Cartridges on leveling system, 1 spare computer for head, and also replaced or repaired many other small items. Parts and Owners manuals for machine, engine, and head. Also log of work I have done to machine. Cummings 8.3, 540 rotation on upper, Long harvester squirt boom, Double Grouser w/ ice cleats, Undercarriage at 50%, Air/Heat. I extensively cleaned machine when purchased and I believe the major components to be in good shape and this will make a good machine for someone. Selling as-is. $89,000 obo.

Timbco 425-D 2000
$89,000
Hydro Ax 611EX Feller Buncher

Hydro Ax 611EX Feller Buncher

2000 Hydro Ax 611EX Feller Buncher with 22" Koering Head. This machine has a new engine, turbo, main drive motor and main pump are all new 15 hours ago, also new batteries and cables, the main grab arm cylinder are new, has been all pressures tested set and checked. Was used for a few weeks to cut 500 cords of Aspen. New teeth, new glass in cab, main drive gear box and the main hanger bearing were just replaced. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 611EX 2000
$42,900
Clark Ranger H67 Skidder

Clark Ranger H67 Skidder

2000 Clark Ranger H67 Dual Arch Grapple Skidder. This machine has a Cummins 5.9 engine, runs and starts good, 8,800 hours, 3 speed Clark shuttle shift transmission, strong hydraulics and cylinders, Esco grapple, 30.5 x32 tires @ 30%, ice chains all around, has a little play on the bottom center pin, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Canada.

Clark H67 2000
$39,500
Timbco T425-D Harvester with a 2004 Rolly Head ***SOLD***

Timbco T425-D Harvester with a 2004 Rolly Head ***SOLD***

2000 Timbco T425-D Harvester with a 2004 Rolly Head. This machine has a Cummins engine, approximately 11,000 hours, strong hydraulics, 2 new finals, 1 new & 1 rebuilt, new final drive motor, undercarriage is in good working order, single grouser, 2004 Rolly head in good working condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Timbco T425-D 2000
$97,500
2000 John Deere 843G Feller Buncher

2000 John Deere 843G Feller Buncher

Good Rubber. 6068T Deere engine, runs great. Hydrostatic drive, works great. 11,357 original hours. Original paint. All functions work as they should. It could use a new seat cover. Heat & A/C. Hi/Lo Range. Joystick controlled.

John Deere 843G 2000
$39,500
Timberjack 660C D/A Grapple Skidder

Timberjack 660C D/A Grapple Skidder

2000 Timberjack 660C Dual Arch Grapple Skidder. This machine has a Cummins 8.3 engine, runs and starts good, decent center section, strong hydraulics, winch will need drive shaft, 35.5 x 32 Firestone specials in good condition. Engine and pumps have been gone through, may need a new solenoid for the transmission. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 660C 2000
$33,000
Ponsse Cobra HS10 Harvester

Ponsse Cobra HS10 Harvester

2000 Ponsse Cobra HS10 Harvester with a Ponsse H60 Big Wheel Processing Head. This machine has ~15,000 hours. CAT engine, 700/45-22.5 rubber, HN 125 crane, engine pre-heater, A/C. Processor is very clean and is in very good condition for the age. Sheet metal is straight and the machine has no visible leaks. Lights intact, pins and bushings are in good condition. Tracks available for an additional cost. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Cobra HS10 2000
$59,900
Franklin 3600 Feller Buncher

Franklin 3600 Feller Buncher

2000 Franklin 3600 Feller Buncher. This machine has a Cummins 6BT engine, runs and starts good, hydrostats have been gone through, 16" hot saw head is in good working order, new accumulator, strong hydraulics, 9,900 hours, 24.5 tires with chains, good glass, heat and A/C. One owner machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Franklin 3600 2000
$27,500
John Deere 648GIII Skidder

John Deere 648GIII Skidder

2000 John Deere 648GIII Dual Arch Grapple Skidder. This machine has a new engine, runs and starts good, strong transmission, tight pins and bushings, center section and grapple arch all in good working order, tight all around. One owner, 44 tires with chains, cylinders are in good condition, heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 648GIII 2000
$45,900
Timberjack 608L Feller Buncher

Timberjack 608L Feller Buncher

2000 Timberjack 608L Feller Buncher. This machine has a Cummins reman engine 4,000 hours ago, runs and starts good, strong hydraulics, leveling system is in good working order, tight boom and head, straight disc good teeth, 28" pads, undercarriage is @ 75%, boom is solid, good hydrostatics, heat, A/C, and lights. Engine has plug in. Well maintained machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 608L 2000
$79,900
Timbco 820D 8 Wheel Forwarder

Timbco 820D 8 Wheel Forwarder

2000 Timbco 820D 8 Wheel Forwarder. This equipment has 14,000 frame hours, around 1,400 hours on reman 8.3 Cummins an pumps, runs great, strong hydraulics, tight pins and bushings, 28L tires @ 85%, stick boom cylinder was rebuilt in November 2017. For more information contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timbco 820D 2000
$119,500