Featured in Delimbers

Sort By:   GridGallery
Photo Title
Make Model Year Price
Link-Belt 240LX with a Denharco DM4400 Delimber

Link-Belt 240LX with a Denharco DM4400 Delimber

2006 Link-Belt 240LX with a Denharco DM4400 Delimber. Hour meter reads 16,000 hours, this equipment has an 6 cylinder Isuzu engine, runs and starts good, new Wabasto pre heat system, new hydraulic pump last year, updated valve bank. Undercarriage has new bottom rollers, idlers are in good order, strong hydraulics and cylinders. Denharco has a straight boom, all rollers and cable are in good condition, topping knives, winch drive. New winch motor and bottom rollers 500 hours ago. Heat & lights. A/C will need some attention. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Link Belt 240LX 2006
$115,000
(4) Daewoo 220LL Delimbers

(4) Daewoo 220LL Delimbers

2 running Daewoo 220ll with Denharco 3000 telescopic delimbers one with new winch drive motor tight machine $55000, one chain drive with new saw motor, $35000. 2 non running machines one Samsung with denharco 3000 with winch drive $5000. one Case machine with chain drive denharco, $8000. also spare Denharco parts with trailer from 3 dismantled machines, $15000. buy individually or take it all for $100000! call 406 544 7213

Daewoo 220LL Unknown
$Call for Price
Koehring Delimber

Koehring Delimber

1986 Koehring Delimber. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Koehring - 1986
$10,500
Linkbelt with a 1997 Limmitt 2000B Delimber

Linkbelt with a 1997 Limmitt 2000B Delimber

1989 Linkbelt with a 1997 Limmitt 2000B Delimber. This machine has a 6 cyl. Isuzu engine, runs and starts good, newer injectors. Straight boom, rollers and cables all in good order. Strong hydraulics and drive system, newer pump. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Link Belt - 1989
$22,900
CTR Delimber

CTR Delimber

CTR Delimber. This equipment works and operates as it should. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

CTR - Unknown
$Call for Price
John Deere 690E with a ProPac 453 Delimber

John Deere 690E with a ProPac 453 Delimber

1994 John Deere 690E with a ProPac 453 Delimber. This machine runs and starts good, John Deere 6068T engine, strong hydraulics and cylinders, straight boom, decent hoses and cables, ProPac is in good working order, grab arms and knives are in working condition, triple grouser pads. Heat, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 690E 1994
$24,500
CAT 320C Excavator with a Denharco 4150 Delimber

CAT 320C Excavator with a Denharco 4150 Delimber

2003 CAT 320C Excavator with a Denharco 4150 Delimber with Butt Saw. This equipment runs and starts good, strong hydraulics, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

CAT 320C 2003
$56,500
Komatsu PC200 LC-6 with a ProPac 453 Delimber

Komatsu PC200 LC-6 with a ProPac 453 Delimber

1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. This equipment has a Komatsu engine, undercarriage is in fair condition, has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC200 LC-6 1999
$59,900
John Deere 690 ELC with Propac 513 Delimber

John Deere 690 ELC with Propac 513 Delimber

1996 John Deere 690 ELC with Propac 513 Delimber. This delimber runs and starts good, strong hydraulics and cylinders, few minor leaks, straight boom, all chains and cables are in order, knives and topping saw are in working order, triple grouser pads. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 690 ELC 1996
$35,900
John Deere 690E with a Lim-mit 2000B Delimber

John Deere 690E with a Lim-mit 2000B Delimber

1996 John Deere 690E with a Lim-mit 2000B Delimber. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders, boom cylinder is being rebuilt. drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. 2000B LIM-MIT delimber has straight boom, chains and roller in good working order, sharp knives, circular topping saw, Espar pre heat system, fuel heater, forestry guard package. Heat lights, a/c needs charge. Contact Erik @ Red Pine Equipment 218-720-0933. Loader is located in Northcentral USA.

John Deere 690E 1996
$57,900
Komatsu PC210LC-11 with a ProPac PP453 Delimber

Komatsu PC210LC-11 with a ProPac PP453 Delimber

2016 Komatsu PC210LC-11 with a ProPac PP453 Delimber. Hour meter reads 4,500 hours, Komatsu Tier 4 165 HP engine, runs and starts good, Espar pre heat system, Komtax Level 5.0 monitoring system, 31.5" triple grouser pads, undercarriage is @ 80%, review camera. 2015 ProPac PP453 Delimber including the following options. Circular saw, long grapple arms, rear cylinder 3'5, heavy duty support cables 5/8", motor MRH 60, complete cab protection with bar reinforcement side window, 9" catwalk, heavy duty guarding for hoses, rock guard welded, rear independent grapple, hydraulic assisted tray, auxiliary oil cooler, canopy. Heat, A/C, & LED lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC210LC-11 2016
$269,000
Komatsu 200 LC-3 w/ Denis Denarco 4400 Boom Delimber

Komatsu 200 LC-3 w/ Denis Denarco 4400 Boom Delimber

1987 Komatsu 200 LC-3 Carrier with a Denis Denarco 4400 Boom Delimber. Hour meter reads 17,200 hours, runs and starts good. Currently running. Has new cable, strong hydraulics and drive system. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu 200 LC-3 1987
$19,500