Sort By:   GridGallery
Photo Title
Make Model Year Price
Komatsu PC210LC-11 with a ProPac PP453 Delimber

Komatsu PC210LC-11 with a ProPac PP453 Delimber

2016 Komatsu PC210LC-11 with a ProPac PP453 Delimber. Hour meter reads 6,500 hours, Komatsu Tier 4 165 HP engine, runs and starts good, Espar pre heat system, Komtax Level 5.0 monitoring system, 31.5" triple grouser pads, undercarriage is @ 80%, review camera. 2015 ProPac PP453 Delimber including the following options. Circular saw, long grapple arms, rear cylinder 3'5, heavy duty support cables 5/8", motor MRH 60, complete cab protection with bar reinforcement side window, 9" catwalk, heavy duty guarding for hoses, rock guard welded, rear independent grapple, hydraulic assisted tray, auxiliary oil cooler, canopy. Heat, A/C, & LED lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC210LC-11 2016
$259,500
Komatsu 220LC with Limmit 2100 Delimber

Komatsu 220LC with Limmit 2100 Delimber

2008 Komatsu 220LC with Limmit 2100 Delimber. This equipment has 9,700 hours, runs and starts good, Komatsu engine, strong hydraulics and cylinders, straight boom, delimber is in good working order, undercarriage is @ 50%, triple grousers, new feed roller motor, rollers and cable are in good order, 36" topping saw, extra saw and hoses few cylinders. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu 220LC 2008
$134,500
Caterpillar 225D with a Denis Stroke Delimber

Caterpillar 225D with a Denis Stroke Delimber

1993 Caterpillar 225D with a Denis (Denharco) Stroke Delimber. This machine has a CAT 3208 newer engine, Hour meter reads 5,000 hours, runs and starts good, strong hydraulics and cylinders, few minor leaks. Decent undercarriage, one top roller will need attention, triple grouser pads, Denis delimber has straight boom, all cables and hose up to par, has a butt and topping saw, knives are in decent condition. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

CAT 225D 1993
$12,000
Harricana 50' Stroke Delimber

Harricana 50' Stroke Delimber

Harricana 50' Stroke Delimber. Boom is in good shape, straight, no welds. This delimber has new knives, new chain, new sprocket. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Harricana 50' 2019
$2,500
Link-Belt 2800 with a Denharco DT3500 Delimber

Link-Belt 2800 with a Denharco DT3500 Delimber

1997 Link-Belt 2800 with 1998 Denharco DT3500 Delimber. This equipment runs and starts good, around 11,500 hours, strong hydraulics, cylinders and hoses are in order, straight boom and inner boom, knives are in good working condition, butt plate, undercarriage is @ 30%, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Link Belt 2800 1997
$51,500
Komatsu PC200 Delimber with a Risley 2000B Limit

Komatsu PC200 Delimber with a Risley 2000B Limit

1998 Komatsu PC200 Delimber with a Risley 2000B Limit. This equipment runs and starts good, strong hydraulic and cylinders, straight boom, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC200 1998
$50,000
Komatsu PC250 Carrier with a Limmit 2200B Delimber

Komatsu PC250 Carrier with a Limmit 2200B Delimber

1994 Komatsu PC250 Carrier with a Limmit 2200B Delimber. This equipment has a Komatsu 6 cyl. engine. Owner stated this machine ran good when it was parked but may need a tune up, engine has been rebuilt, strong hydraulics has a few leaks, undercarriage is @ 40%, 28" triple grouser pads, straight boom has been re-enforced in a few spots, decent knives and grab arms, swing lock has been bypassed may need a wiring harness. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Komatsu PC250 1994
$24,900
2006 Link Belt 210LX with Propac 453 Delimber

2006 Link Belt 210LX with Propac 453 Delimber

2006 Link Belt 210LX with Propac 453 Delimber and Topping Saw. This machine has an Izuzu engine with ~14,500 hours, Webasto pre-heater, auxiliary hydraulic coolers, and extra shielding. Undercarriage is in good condition - estimated @ 70%. New drive pump and boom 3 years ago. Well maintained machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Link Belt 210LX 2006
$109,900
CAT 320B with a Denharco 4400 Stroke Delimber

CAT 320B with a Denharco 4400 Stroke Delimber

2000 CAT 320B with a Denharco 4400 Stroke Delimber. This machine has 11,600 hours, 2000 on new engine and computer, undercarriage is in good working condition, solid boom, delimber has a 46 tooth heavy duty topping saw, strong hydraulics, updated on all oils, Afex fire system, heat, A/C, and radio. Well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

CAT 320B 2000
$92,500
1999 Hyundai 210 LC-3 High Walker Delimber

1999 Hyundai 210 LC-3 High Walker Delimber

1999 Hyundai 210 LC-3 High Walker, Denharco 3500 Chain drives, Butt saw, Forestry Cab, Heavy Under pans, Auxiliary fuel tank, Hd side panels, Cat walks, 5.9 cummins...ready to work!!!!!

Hyundai 210-lc-3 H/W 1999
$Call for Price
Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***

1997 Komatsu 200LC-6 with a 1998 Lim-Mit 2000B Delimber. This machines main pump was replaced three years ago, newer Cummins 5.9 engine, undercarriage is in good condition, straight boom, delimber in good working condition. tight controls, good hoses, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD***

Komatsu 200LC-6 1997
$35,900
CAT 320B w/ Propac Stroke Delimber ***SOLD***

CAT 320B w/ Propac Stroke Delimber ***SOLD***

2001 CAT 320B with a Propac Stroke Delimber. Owner stated that this unit has 4,000 hours on the engine, runs and starts good, new boom 2 years ago, new fuel pump 200 hours ago, strong hydraulics, delimber has good undercarriage, newer valve bank, good heat and A/C. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***SOLD***

CAT 320B 2001
$42,500