Delimbers For Sale
Photo |
Title
|
Make | Model | Year | Price |
![]() |
Komatsu 210LC-10 with Propac 453 Delimber ***SOLD***2014 Komatsu 210LC-10 with 2017 Propac 453 Delimber. Hour meter reads 4,490 hours. Komatsu Tier 4 165 HP engine, runs and starts good, Espar pre heat system, Komtax Level 5.0 monitoring system, 31.5" triple grouser pads, undercarriage is @ 80%, review camera. 2017 ProPac PP453 Delimber including the following options. Circular saw, long grapple arms, rear cylinder 3'5, heavy duty support cables 5/8", heavy duty guarding for hoses, rock guard welded, rear independent grapple, hydraulic assisted tray, auxiliary oil cooler, canopy. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD** |
Komatsu | 210LC-10 | 2014 |
$Call for Price
|
![]() |
Chambers DelimbinatorChambers Delimbinator. John Deere 6081 engine has been rebuilt. Hour meter reads 23 hours. Floor and both flails are in good condition. Includes extra chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Chambers | Delimbinator | Unknown |
$24,900
|
![]() |
Caterpillar 225D with a Denis Stroke Delimber1993 Caterpillar 225D with a Denis (Denharco) Stroke Delimber. This machine has a CAT 3208 newer engine, Hour meter reads 5,000 hours, runs and starts good, strong hydraulics and cylinders, few minor leaks. Decent undercarriage, one top roller will need attention, triple grouser pads, Denis delimber has straight boom, all cables and hose up to par, has a butt and topping saw, knives are in decent condition. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
CAT | 225D | 1993 |
$22,500
|
![]() |
Hyundai 210LC-7 with Propac 453 Delimber2007 Hyundai 210LC-7 with Propac 453 Delimber. Hour meter reads 8,680 hours. New engine with 750 hours. New Berco undercarriage, 28" triple grouser pads. Straight boom, delimber is in good condition. Newer oil pump, new chain on the boom, & new drive motor. New side rollers & new pins and bushings in grab arms. Heat, radio. Open to offers. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hyundai | 210LC-7 | 2007 |
$64,900
|
![]() |
Komatsu PC220 Limmit 2100 Delimber ***SOLD***2009 Komatsu PC220 Limmit 2100 Delimber. Hour meter reads 12,800 hours. Komatsu engine. 32" triple grouser pads, undercarriage is in good condition. New boom, cables, & hoses. Limmit 2100 delimber is in good working order, 32" circular topping saw. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Komatsu | PC220 | 2009 |
$Call for Price
|
![]() |
LinkBelt 2800 with Propac 453 Delimber ***ON HOLD***1996 LinkBelt 2800 with Propac 453 Delimber. Hour meter reads 18,249 hours. Isuzu 6BG1T engine. 32" triple grouser pads, undercarriage is estimated at 80%. Propac 453 delimber is in good working order. Topping saw. Boom is straight. Grab arms are tight. Forestry package, heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Link Belt | 2800 | 1996 |
$41,500
|
![]() |
Komatsu PC210LC7 with Propac 453 Delimber2006 Komatsu PC210LC7 with Propac 453 Delimber. Hour meter reads 12,663 hours. Komatsu SAA6D102E-2 143hp engine. 24" triple grouser pads, undercarriage is estimated at 80%. Propac 453 delimber is in good working order, straight, grab arms are tight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC210LC7 | 2006 |
$66,500
|
![]() |
John Deere 690E with a Lim-mit 2000B Delimber1996 John Deere 690E with a Lim-mit 2000B Delimber. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders, boom cylinder is being rebuilt. drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. 2000B LIM-MIT delimber has straight boom, chains and roller in good working order, sharp knives, circular topping saw, Espar pre heat system, fuel heater, forestry guard package. Electronic idle will need work. Another 690E parts machine with a LIM-MIT delimber can be included. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Loader is located in Northcentral USA. |
John Deere | 690E | 1996 |
$45,000
|
![]() |
Volvo EC220DL with 2015 Propac 453 Delimber2015 Volvo EC220DL with 2015 Propac 453 Delimber. Hour meter reads 12,410 hours. Volvo D6H 165hp engine. 28" triple grouser pads, undercarriage was just redone spring of 2022 & is estimated at 95%. Forestry package, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Volvo | EC220DL | 2015 |
$165,000
|
![]() |
John Deere 690 with Propac 453 Delimber1995 John Deere 690 with Propac 453 Delimber. John Deere 6068T engine starts and runs good. Strong hydraulics and cylinders, drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. Propac 453 Delimber is tight & in good working order. Cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
John Deere | 690 | 1995 |
$17,500
|
![]() |
Komatsu PC200 LC-6 with a ProPac 453 Delimber1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. Hour meter reads 20,000 hours. This equipment has a Komatsu engine, undercarriage is in fair condition but has never been changed, one owner. Has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 LC-6 | 1999 |
$45,900
|
![]() |
Komatsu PC200 LC-8 with Denharco DMC4140 Delimber ***ON HOLD2008 Komatsu PC200 LC-8 with Denharco DMC4140 Delimber. Cylinders are dry. Hydraulic hoses are dry. Cummins engine. Bypass grapple & top saw on the delimber. Undercarriage at about 30%. 28" double grouser pads. New set of rails and pads that could go with. Denharco DMC4140 Delimber is in good shape. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Komatsu | PC200 LC-8 | 2008 |
$90,000
|