Featured in Logging Equipment

NO FEATURED LISTINGS TO DISPLAY

Sort By:

Photo	Title	Make	Model	Year	Price
	Serco 170A Loader with a 72" Siiro Slasher Saw *SOLD* 2003 Serco 170A Loader with a 72" Siiro Slasher Saw. John Deere 6068 Engine starts and runs good. Tight pins and bushings on loader. Tight dry unit. Mack carrier with 5 speed and reverse. Cab has heat and all new A/C components. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Serco	170A	2003	$44,500
	John Deere 648GIII Skidder 2003 John Deere 648GIII Dual Arch Grapple Skidder. This skidder starts and runs good, strong hydraulics and cylinders. Direct drive transmission is in good working order, tight center section, decent pins and bushing on the arch, grapple pins have a little play. Axles and cradles are in good working order, lots of new hoses, recently packed cylinders, tires are @ 75%, New glass front and rear, new air ride seat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.	John Deere	648GIII	2003	$37,900
	Prentice 384 Self Propelled Loader *SOLD* 2003 or 2004 Prentice 384 Self Propelled Loader with a 72" Hanfab Slasher. Hour meter reads 16,000 hours, new John Deere engine at 14,000 hours, new pump drive, hydraulics were just checked, 72" Hanfab slasher, self propelled carrier is in good working order, 5/8 cord Rotobec bucket. Lever controls. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Prentice	384	2003	$54,900
	Ponsse Ergo Harvester with H7E Processing Head 2003 Ponsse Ergo Harvester with H7E Processing Head. This harvester has a Mercedes Benz engine, starts & runs good, strong hydraulics and cylinders, HN 125 Crane. Tight center section, bogies are in good working order. Fire suppression. Webasto pre-heater. 700/50-26.5 tires, strong boom, head is in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Ponsse	Ergo	2003	$102,500
	CAT 320C Excavator with a Denharco 4150 Delimber 2003 CAT 320C Excavator with a Denharco 4150 Delimber with Butt Saw. This equipment runs and starts good, strong hydraulics, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.	CAT	320C	2003	$50,000
	Rottne Rapid SMV Forwarder *SOLD* 2003 Rottne Rapid SMV 8 Wheel Double Bunk Forwarder. Hour meter 16,000 hours. 500 hours on new John Deere 6 cylinder engine, runs and starts good, with all records. Strong hydraulics and cylinders. Tight RK 90 boom and Sure Grip grapple. Bogies are in good working order, just were redone. Lots of other recent work done, all receipts available. 2 sets of tracks, 1 @ 90%, 1 @ 30%. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *SOLD*	Rottne	Rapid SMV	2003	$84,500
	2003 Fabtek 344B Forwarder 2003 FABTEK 344B SINGLE BUNK FORWARDER 4 CYL JOHN DEERE OVERHAULED ONE YEAR AGO POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM 28L 26 RUBBER	Fabtek	344B	2003	$89,500
	Timberjack 1110D Forwarder 2003 Timberjack 1110D 8 Wheel Double Bunk Forwarder. This equipment starts and runs good, replaced head gasket, engine module, new injectors a year ago, newer water pump, new A/C pump, top boom has been redone, CF510 crane with double extension, strong hydraulics and cylinders, main boom cylinder and jib cylinder have been recently resealed. SureGrip grapple, 700/50-26.5 rubber. Some tires will need to be replaced soon. Espar pre-heater. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Timberjack	1110D	2003	$67,000
	Ponsse Caribou Forwarder *SOLD* 2003 Ponsse Caribou Forwarder. This equipment has a Mercedes Benz Engine, runs and starts good, strong hydraulics and cylinders, tight extended boom and grapple, bogies are in good working order, Pro Heat is not working, 500 tires with chains. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Ponsse	Caribou	2003	$79,500
	John Deere 648GIII Dual Arch Grapple Skidder 2003 John Deere 648GIII Dual Arch Grapple Skidder. This skidder runs and starts good, strong hydraulics and cylinders. Direct drive transmission in good working order, tight center section, decent pins and bushings on the arch, grapple pins have a little play. Axles and cradles are in good working order, tires are @ 75%, heat. A/C needs attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.	John Deere	648GIII	2003	$49,500
	Ponsse Ergo Harvester with a H73E Head 2003 Ponsse Ergo Harvester with a H73E Head. This machine has a Mercedes Benz engine, 1,200 hours on new motor, runs and starts good, pre-heater, strong hydraulics and cylinders, tight boom and boom base, H73E head has good rollers and grab arms, measuring system and control are in good order, tires, track tires, and tracks are in good shape. Heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Ponsse	Ergo	2003	$92,500
	Logging Operation *SOLD* Logging Operation FOR SALE: 2003 Tigercat 630B Dual Arch Grapple Skidder. This equipment has a newer Cummins engine runs and starts good, hour meter reads 10,000 hours. 2 new pumps, strong hydraulics and cylinders, decent pins and bushing, Good 50" tires. 2011 John Deere 643K Feller Buncher. Hour meter reads 7,900 hours, runs and starts good, strong hydraulics and cylinders, joystick controls, FD head. 28L x 26 tires, Heat, A/C, and lights. 2013 CAT 559B Loader. Owner stated this machine runs and starts good, hour meter reads 13,396 hours, strong hydraulics and cylinders, carrier is in good working order. Tight boom, 360 grapple. Heat, A/C, and lights. CTR Ground Saw and Delimber. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. *SOLD*	Tigercat	630B	2003	$110,000