Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 540B Skidder

John Deere 540B Skidder

1989 John Deere 540B Cable Skidder. Hour meter reads 8,100 hours. John Deere 4045 turbo engine starts and runs good. PowerShift transmission shifts well. Tires are estimated at 30% with new double diamond ice chains on the front and bear claw chains on the rears. Strong winch and tight center. Cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 540B 1989
$23,500
John Deere 648D Skidder

John Deere 648D Skidder

1989 John Deere 648D Single Arch Grapple Skidder. Hour meter reads 15,657 hours, 0 hours on rebuilt 6068T engine from John Deere, can provide receipts upon request. 30x32 tires are estimated at 60%. Center pins are tight. Strong pump, solid blade. Enclosed cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 648D 1989
$25,900
Bobcat 1080C Feller Buncher with a 16" Bar Saw

Bobcat 1080C Feller Buncher with a 16" Bar Saw

1989 Bobcat 1080C Feller Buncher with a 16" Bar Saw. Hour meter reads 8,840 hours, 4BT Cummings, new auxiliary pump, new heater, extra bars and chains, new bearings and shaft that run the chain, new hydraulic fluid and filters, good tires and tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Bobcat 1080C 1989
$19,500
Hood Loader with 60" Slasher

Hood Loader with 60" Slasher

1989 Hood Loader with 60" Slasher. 1500 hours on rebuilt 6.8L engine. Tight boom, slasher works as it should with strong hydraulics. Enclosed cab with lever controls. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Hood - 1989
$32,000
Hydro-Ax 311C w/Bunching 16" Shear and a 8' Flail Delimber

Hydro-Ax 311C w/Bunching 16" Shear and a 8' Flail Delimber

1989 Hydro-Ax 311C Bunching 16" Shear and a 8' Flail Delimber. This equipment has a John Deere 4 cyl. engine, runs and starts good, newer hydraulic pump, strong hydrostatic transmission, tight center section, newer blades on shear, shear cylinders were recently repacked, 28Lx26 Firestone tires @ 75% with a set of chains, decent glass, newer hoses, heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 311C 1989
$18,900
Hood S-182 Loader ****SOLD***

Hood S-182 Loader ****SOLD***

1989 Hood S-182 Loader with Hood 60" Slasher on Mack Truck. Has a John Deere engine that was replaced in 2002. 30' boom. Hydraulics are in good shape. Main pump and saw pump were rebuilt 3 years ago. Slasher has a straight blade and good teeth. Tires for loader are @ 75%. Tires for truck are @ 25%. Truck will need new brakes, tie rods, & clutch. Bypass grapple and dead heel. Enclosed cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hood S-182 1989
$10,000
Prentice 210D Loader on 1989 Mack Truck

Prentice 210D Loader on 1989 Mack Truck

1989 Prentice 210D Loader on 1989 Mack Truck. 183,397 miles on the truck, 12,573 hours on the loader. John Deere 6059T engine, & Eaton Fuller 10 speed transmission Bypass grapple with joystick controls. Oil pan is dry, cylinders overall pretty dry, oil lines are wet. 425/65 r22.5X8.25 Bridgestone tires. Tires are at about 80%. Red Dot aftermarket heater. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Prentice 210D 1989
$19,000
John Deere 648D Skidder  ***SOLD***

John Deere 648D Skidder ***SOLD***

1989 John Deere 648D Dual Arch Skidder This skidder has a continuous rotating grapple. Starts and runs good, strong hydraulics. New seat. Machine has heat. Comes with a set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcetnral USA. ***SOLD***

John Deere 648D 1989
$22,500
Clark Ranger 665D Skidder ***SOLD***

Clark Ranger 665D Skidder ***SOLD***

1989 Clark 665D Grapple Skidder with Winch. This skidder has a John Deere 4 cylinder engine, runs and starts good, hour meter reads 9,403 hours, strong hydraulics and cylinders, few minor leaks, Clark 3 speed transmission is in good working order, tight center section, grapple and arch are in good order, winch works as it should, 1/2 super swedge mainline, 23.1x26 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. ***SOLD***

Clark Ranger 665D 1989
$28,500
John Deere 548D Skidder ***SOLD***

John Deere 548D Skidder ***SOLD***

1989 John Deere 548D Grapple Skidder with Winch. This equipment runs and starts good, strong hydraulics, tight center and grapple. strong winch, tires are in good working condition, strong transmission, solid axles. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 548D 1989
$31,500
John Deere 640C Skidder

John Deere 640C Skidder

1989 John Deere 640C Cable Skidder. This skidder is in good shape, strong John Deere 6068 engine, runs and starts good. Power Shift transmission, tight center section, strong hydraulics and cylinders, all cylinders have been gone through, strong 60,000 LBS. Winch is a 3/4" super swedge mainline. 28L x26 tires with a set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 640C 1989
$34,500
John Deere 548D Skidder ***SOLD***

John Deere 548D Skidder ***SOLD***

1988-89 John Deere 548D Grapple Skidder with Winch. This machine starts & runs good, engine and Power Shift transmission have recently been rebuilt, sleeves, pistons, new injectors, new water pump, strong hydraulics and cylinders, few minor leaks, tight center section, new pins on steer cylinders, arch and grapple in good condition, strong winch. New mainline. 28Lx26 tires @ 60% with 2 sets of Bear Claw chains like new. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

John Deere 548D 1989
$38,000