Photo |
Title
|
Make | Model | Year | Price |
John Deere 648GIII Skidder2012 John Deere 648GIII Grapple Skidder with Winch. Hour meter reads 3,106 hours, runs and starts good with a newer engine & transmission, receipts available upon request. 20,000 frame hours. Strong hydraulics, winch is in good working condition, grapple clasps and spins. 30.5x32 tires are estimated @ 50%. Both rear ends have been recently resealed and boom cylinders packed within the last year. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
John Deere | 648GIII | 2012 |
$61,500
|
|
2012 CAT 501HD2012 CAT 501HD TRACKED HARVESTER 6 CYL DEERE FOUR ROLLER HEAD AIR AND HEAT |
CAT | 501HD | 2012 |
$245,000
|
|
CAT 559B Loader with CSI Delimber and Bucksaw2012 CAT 559B Loader with CSI Delimber and Bucksaw. Hour meter reads 6,200 hours. CAT engine. Loader is tight, hydraulic carrier, landing gear is in good working order. 4400 Bucksaw was bought new 3 years ago. Preheat system, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
CAT | 558B | 2012 |
$142,500
|
|
John Deere 848H Skidder2012 John Deere 848H Grapple Skidder with Winch. Hour meter reads 9,000 hours. John Deere 6068H engine. Torque converter transmission. 35.5 tires are estimated at 70%. Grapple is tight and winch is in good working order. Heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 848H | 2012 |
$135,000
|
|
2012 JOHN DEERE 1010E2012 JOHN DEERE 1010E DOUBLE BUNK FORWARDER 4 CYL DEERE EXTENDABOOM BYPASS BUCKET |
John Deere | 1010E | 2012 |
$169,000
|
|
John Deere 1210E Forwarder2012 John Deere 1210E Forwarder. Hour meter reads 17,000 hours. 710/45-26.5 tires are estimated at 60%, includes a set of tracks. CF7 crane with a squirt boom. Rotating cab, Espar preheat system. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 1210E | 2012 |
$Call for Price
|
|
Komatsu XT445L with Quadco 22B 40° Head2012 Komatsu XT445L with Quadco 22B 40° Head. Hour meter reads 12,000 hours. 24" single grouser pads, undercarriage is estimated at 80%. Quadco 22B with 40° rotation, disc and felling head are in good condition. Leveling system. Pins and bushings are tight. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Komatsu | XT445L | 2012 |
$155,000
|
|
CAT 501HD with Fabtek 4 Roller Processing Head2012 CAT 501HD with Fabtek 4 Roller Processing Head. Hour meter reads 12,000 hours. CAT C6.6 engine. 24" double grouser pads, undercarriage is estimated at 75%. PF48 head, measuring system is in good working order, feed wheels and knives in good condition. Proheat preheat system. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
CAT | 501HD | 2012 |
$142,500
|
|
John Deere 1270E 6W Processor with Waratah 616C Head2012 John Deere 1270E 6W Processor with Waratah 616C Processing Head. Hour meter reads 14,112 hours. John Deere 6090 engine, hydrostatic transmission. 710/55-R34 tires are estimated at 80%, 600 tires are estimated at 70%. CH7 crane is tight. New windshield & main lift cylinder. Waratah 616C - went through a full rebuild at 9,500 hours. Self leveling cab with heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 1270E | 2012 |
$199,000
|
|
Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber2012 Prentice 2384B Loader with CSI 4400 Buck Saw and CTR 426 Delimber. Hour meter reads 14,000 hours. Reman hydraulic pump and pilot pump. Boom is straight, minimal slack. CSI 4400 Buck Saw with an 18' table. CTR 426 delimber is in good working order. John Evans trailer. Cab has heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Prentice | 2384B | 2012 |
$43,500
|
|
CAT 501HD with PF48 4 Roller Processing Head2012 CAT 501HD with PF48 4 Roller Processing Head. Hour meter reads 7,593 hours. CAT C6.6 engine. 24" double grouser pads, undercarriage is estimated at 70%. Boom is tight, all cylinders have been repacked in the last 400 hours, all hoses are in good condition. PF48 head wtih minimal welding, measuring system is in good working order. 2nd owner machine. Ready to work. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
CAT | 501HD | 2012 |
$152,500
|
|
Morbark 2355 Flail Chiparvestor2012 Morbark 2355 Flail Chiparvestor. Hour meter reads 17,000 hours. CAT C27 engine that was gone through a few years ago. 3 knife, liners are good, flails are in good condition. New PTO system in 2022. Needs new rubbers inside the flails. Includes spare bearings, conveyor chains, flail rods, & filters. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Morbark | 2355 | 2012 |
$270,000
|