Featured in Sawmill Equipment

Buhler 500 HP Pellet Mill. Includes parts manual. Unit is in good working condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

2019 Baker Products 3674D Sawmill. Hour meter reads 1,535 hours. Deutz 74hp. 20' capacity, unit is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.

2023 Wood-Mizer LT50 Wide Saw Mill. Hour meter reads 10 hours, demo hours. 38 HP. gas engine. Trailer kit, FAO legs, debarker, lube mizer high performance, HP kit, 15 blades, blade sharpener, toothsetter, & electrical package. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

1988 Meadows Mills #2 Sawmill. 350 kva Cummins generator. Everything is electric & runs off the generator. $55,000 for the mill, generator, & panels. 26" Montgomery wood hog can be included for an additional $33,500. Contact Erik @ Red Pine Equipment 218-720-0933. Sawmill is located in Northeast USA.

Jackson Sawmill. Mill saw with cab, log deck, take away belts, green chains, 2 cut offs, and a homemade shavings mill. Includes 3 saws. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Sprout Waldron Pellet Mill. This is a turnkey Pellet Making Operation. The grinder system includes a bin for loading shavings to feed the hammer mill. The hammer mill, feed conveyor, and auger in the feed bin are controlled with sensing units so that the mill cannot be over fed and jam up. As the amps on the hammer mill climb the feed auger slows, when the amps reach a pre-set limit the feed conveyor stops to allow the hammer mill to catch up. This is all 3 phase 240v components. The hammer mill has a ¼” screen, which is the correct size for the pellet system. It has a 40 HP motor. There is a small 220v blower which takes the feed stock out of the chamber, the hammer mill fills and feeds it into the hopper above the pellet mill. There is a 30’ out feed conveyor that the pellets fall onto out of the pellet mill, which also has a variable speed control and is reversible. There are misc. spare parts included. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.