Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet 415EX Harvester ***SOLD***

Valmet 415EX Harvester ***SOLD***

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has 9,700 hours, 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan. Pumps are all in good order, all were recently pressure checked. Undercarriage is @ 80%. Rollers, idlers, sprockets, 24" double grouser pads were all gone through. New Computer DASA 4 one year ago, measuring system is accurate, valve bank rebuilt 1 year ago on the head, feed rollers and grab arms are all in good order, new head rotator. New main boom, no cracks or welds. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Valmet 415EX 2007
$122,500
Valmet 415EX Harvester with a Rolly II Head ***SOLD***

Valmet 415EX Harvester with a Rolly II Head ***SOLD***

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has a 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan, pumps are all in good order, & were all recently pressure checked, undercarriage is @ 95%. Rollers, idlers, sprockets, & 24” double grouser pads were all gone through. New computer DASA 4 one year ago, measuring system is accurate, valve bank was rebuilt 1 year ago on the head. Feed rollers and grab arms are all in good order, new head rotator, new main boom no cracks or welds. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Valmet 415EX 2007
$79,500
Tigercat 822 Processor with a Rolly III Head

Tigercat 822 Processor with a Rolly III Head

2007 Tigercat 822 Processor with a Rolly III Head. This machine has a Newer Cummins engine with 1,100 hours, runs and starts good, Pro Heat system. New Rolly III XTHP R24B Head with 500 hours on head, Woodland computer. No top saw, new undercarriage, new 30" double grouser tracks, new sprockets and idlers with 0 hours. Final drives are one year old. Strong hydraulics and cylinders, tight boom, has a new extra feed roller motor to go with. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Tigercat 822 2007
$249,000
John Deere 1470D Processor with Waratah H290 Head

John Deere 1470D Processor with Waratah H290 Head

2008 John Deere 1470D Processor with Waratah H290 Head. Hour meter reads 10,151 hours, John Deere 6 cyl. engine, runs and starts good, pre-heat system, strong hydraulics and cylinders, drive system is in good working order, tight CH885 squirt boom, head has good feed rollers and grab arms, computer and measuring system are in good working condition, bogies and axles up to par, tight center section, 700 tires, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 1470D 2008
$185,000
CAT 501HD Processor ***SOLD***

CAT 501HD Processor ***SOLD***

2008 CAT 501HD Processor with a Dangle Processor Head. This machine has 9,800 hours, runs and starts good, strong hydraulics, undercarriage is in good working order - 65-75%, tight boom, has been re-enforced, computer in good working condition, PH head in good working condition was completely rebuilt 8 months ago, new grab arms, feed rollers, new saw motor, heat, A/C, and radio. Machine has been well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

CAT 501HD 2008
$114,900
CAT 501HD Processor

CAT 501HD Processor

2008 CAT 501HD Processor with Fixed Head. This machine has 12,000 hours, runs and starts good, like new undercarriage, strong hydraulics. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***REDUCED FROM $164,500.00***

CAT 501HD 2008
$149,000
2008 John Deere 1270D Harvester

2008 John Deere 1270D Harvester

2008 JOHN DEERE 1270D WHEELED HARVESTER 6 CYL DEERE HYDRASTATIC DRIVE 480C HEAD 600 RUBBER

John Deere 1270D 2008
$210,000
John Deere 1270D Harvester

John Deere 1270D Harvester

2008 John Deere 1270D Harvester. 11,000 hours. Recent new injectors in engine which runs and starts good. H480 head has been rebuilt. 2 outer drive motors and one inner motor were rebuilt recently. Espar engine, hydraulic, and cab preheat system, strong hydraulics and cylinders, reman work pump and drive pump in the last 500 hours, tight boom and center section, stick and lift cylinders redone, bogies are in good working order, solid rear ends, 700 tires @ 50% with rear tracks, one set of chains. Feed rollers and grab arms are in good condition, Timbermatic HHM 300 computer. Heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1270D 2008
$144,900
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$180,000
Valmet 911.4 Harvester with a 370.2 Head

Valmet 911.4 Harvester with a 370.2 Head

2008 Valmet 911.4 Harvester with a 370.2 Head. Hour meter reads 8,000 hours, Sisu engine, runs and starts good, just tested hydraulic and engine oils all clean, strong hydraulics and cylinders, tight boom, new hoses, tight pins and bushings, bogies are in good order, extend-a-boom in good condition. Measuring system is in good working order. Feed rollers and grab arms are in good condition. 700 tires @ 60% with a new set of tracks. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 911.4 2008
$132,000
Valmet 430FXL Processor with a Rolly II Intermittent Head

Valmet 430FXL Processor with a Rolly II Intermittent Head

2009 Valmet 430FXL Processor with a Rolly II Intermittent Head. This machine runs and starts good, strong hydraulics and pumps, tight pins and bushings in the boom and head. Undercarriage is in good working order, single grouser pads. Rolly II head works good. Good glass. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 430FXL 2009
$Call for Price
09' John Deere 703JH with Waratah 622B

09' John Deere 703JH with Waratah 622B

14k hours, Feed Roller motor, Main Saw Motor, Measuring Wheel, Pumps Resealed, less than 800 hours ago. Has Top Saw, Espar Heater, Good Undercarriage, Good Machine. My Loss is Your Gain.

John Deere 703JH 2009
$86,000