Sort By:   GridGallery
Photo Title
Make Model Year Price
Morbark Wolverine Three Wheel with Hahn HSG 140 Harvester

Morbark Wolverine Three Wheel with Hahn HSG 140 Harvester

1995 Morbark Wolverine with a Hahn HSG140 Processor Head. Hour meter reads 5,200 hours, Cummins 4BT engine, runs and starts good, strong hydraulics and controls, tight boom, head is in good working order, extra bars and chains, 23.1x26 tires, heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Morbark Wolverine 1995
$28,900
TimberPro TN725C Processor with a Log Max 7000 Head

TimberPro TN725C Processor with a Log Max 7000 Head

2016 TimberPro TN725-C Processor with a Log Max 7000 Head. This machine has 2,700 hours as of August 30, 2018, Cummins QSC 8.3 - 300 HP engine, Caterpillar D6 size track frames with double-flanged rollers, 24" pads, 6' squirt boom, Lohmann final drives, Rexroth 2-speed motors. 2004 Log Max 7000 has had saw and feed wheel motors replaced, valve bank resealed, new knives, all cylinders repacked. Logmate 400 computer system. Carrier has fire suppression system, Espar pre-heater, deluxe air-ride seat with heat and lumbar support, heat, A/C, and LED lighting. Owner/Operator machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TN725C 2016
$345,000
2011 TIMBERPRO TN725B

2011 TIMBERPRO TN725B

2011 TIMBERPRO TN725B

Timberpro TN725B 2011
$225,000
TimberPro TL735-B Processor with Logmax 7000XT Fixed Head

TimberPro TL735-B Processor with Logmax 7000XT Fixed Head

2014 TimberPro TL735-B Processor with Logmax 7000XT Fixed Head. This machine has a Cummins tier 3 300 HP engine, runs and starts good. 8,100 hours. New injectors, oil pan gasket, and rear engine seal. Pumps resealed and checked. Espar heat engine and hydraulics. Pump drive new input shaft and bearings. All regular maintenance done on schedule, oils changed every 1,000 hours, engine oil every 500 hours. Undercarriage is @ 50%, 24" double grouser pads. Processor head is stronger and more productive than other fixed heads. New Logmate 500 computer and head module. $40,000 in recent updates and work done on machine. New roto bearing on head, new saw motor, new saw bar holder, auto level option, new leveling cylinders, new A/C pump. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro TL735-B 2014
$289,000
TimberPro TL735-B Leveling Harvester

TimberPro TL735-B Leveling Harvester

2011 TimberPro TL735-B Leveling Harvester with a Rolly II Head. This equipment has 3,200 hours, Cummins 8.3 engine, runs and starts good, strong hydraulics and cylinders, tight boom. Undercarriage is @ 75% 24" single grouser pads long track. The Rolly II head has new measuring wheel. The feed rollers and grab arms are in very good condition, roto saw blade is in good working order, Dasa 4 computer, heat, A/C, radio, and light package. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

Timberpro TL735-B 2011
$275,000
2015 Timberpro TL725B

2015 Timberpro TL725B

Very nice one owner/operator machine. 11,480 hours. Heat & A/C. Preheater. 8.3 Cummins runs like new. Everything works as it should. Tier 3 engine, no def!! Rolly head in very good condition. Clean inside and out. No leaky cylinders. No welds on boom and pins are tight. New sprockets. We do take trades depending on what you have and we can help with delivery if needed. Serial number is 0307-01.

Timberpro TL725B 2015
$229,000
TimberPro TL725B Processor with Rolly II R24R Head

TimberPro TL725B Processor with Rolly II R24R Head

2010 TimberPro TL725B Processor with Rolly 2 R24R Intermittent Disc Processing Head with Dasa4 operating system. ~9100 hours on carrier. Cummins 8.3 300 HP engine. Undercarriage is estimated @ 80%, 24" single grouser pads. Very clean and straight machine and head. No major hydraulic leaks. Webasto Pre-heater and fire protection. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro TL725B 2010
$215,000
2015 Timberpro TL725B Processor

2015 Timberpro TL725B Processor

Very nice one owner/operator machine. 11,480 hours. Heat & A/C. Preheater. 8.3 Cummins runs like new. Everything works as it should. Tier 3 engine, no def!! Rolly head in very good condition. Clean inside and out. No leaky cylinders. No welds on boom and pins are tight. New sprockets. We do take trades depending on what you have and we can help with delivery if needed. Serial number is 0307-01.

Timberpro TL725B 2015
$229,000
2012 Timberpro TL725B

2012 Timberpro TL725B

TimberPro TL725B Crawler, with Quadco 22B hotsaw, 5,000 hours

Timberpro TL725B 2012
$Call for Price
TimberPro TL-725B Harvester with a Rolly II Head

TimberPro TL-725B Harvester with a Rolly II Head

2011 TimberPro TL-725B Harvester with a Rolly II Head. Hour meter reads 9,700 hours, Cummins 8.3 engine, runs and starts good, new pan gasket and main seal, flex plate was done at the same time, valve banks were gone through and resealed. Espar pre heat system, fire suppression system. Strong hydraulics, and cylinders, drive pumps are in good working order, 2 new final drives. Undercarriage is @ 50%, 24" single grouser pads. Newer house bearing 1,500 hours ago. Rolly II head, grab arms and both bottom and topping saw are in good working condition. Dasa 4 computer, good glass, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TL-725B 2011
$175,000
TimberPro TL-725B Harvester with a Rolly II Head

TimberPro TL-725B Harvester with a Rolly II Head

2013 TimberPro TL-725B Harvester with a Rolly II Head. Hour meter reads 7,500 hours, Cummins 8.3 engine, runs and starts good, 1,000 hours on a new pan gasket and main seal, flex plate was done at the same time, Espar pre heat system, fire suppression system. Strong hydraulics, new main pump 1,200 hours ago, drive pumps in good working order, new swing bearing and trunnion. Rolly II head has more hours then the machine but is in good working order, grab arms and both bottom and topping saw are in good working condition. Good glass, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TL-725B Unknown
$175,500
Timberking TK721 Processor w/ Logmax 7000 Head ***SOLD***

Timberking TK721 Processor w/ Logmax 7000 Head ***SOLD***

2006 Timberking TK721 Processor with a Logmax 7000 Head. Hour meter reads 7,500 hours on a CAT engine, 20,000 frame hours, runs and starts good, strong hydraulics and cylinders, tight boom, Logmax 7000 head in good working order, undercarriage is @ 60%, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machines is located in Canada. ***SOLD***

Timberking TK721 2006
$85,900