Sort By:   GridGallery
Photo Title
Make Model Year Price
Fabtek Harvester & Forwarder Parts.

Fabtek Harvester & Forwarder Parts.

We have used parts for these following salvage/dismantled Fabtek machines: 133 , 153 , 344B , 346B , 548B , 546C , 548C & 663. Please call for more information!

- - Unknown
$Call for Price
Ponsse Ergo Harvester with a H73E Head

Ponsse Ergo Harvester with a H73E Head

2006 Ponsse Ergo Harvester with a H73E Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, cylinders and valve banks are in good working order. Tight boom and base, squirt boom is in good condition, bogie and axles are in working order. H73E and measuring system are in good condition. 710 rear tires @ 50%. Heat, A/C, and new lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

- - Unknown
$Call for Price
2004 John Deere 1270D Harvester Parts Machine

2004 John Deere 1270D Harvester Parts Machine

Machine runs and drives good. Many good parts. Please email or call with what you're looking for and we'll let you know if we have it and what the condition is. Serial number for machine is WJ1270D000597.

- - Unknown
$Call for Price
Timbco 415

Timbco 415

Nice working processor. Previously owner operated machine. Heat & A/C. Ponsse H8 processing head with telescopic boom that was installed professionally by Ponsse. Cummins 5.9 engine runs excellent. New paint and decals. 2 speed travel works as it should. Undercarriage is brand new. 26 inch double grouser pads. we do take trades depending on what you have and we can assist with trucking and financing if needed.

- - Unknown
$79,500
Valmet 415 FX  2009

Valmet 415 FX 2009

2009 Valmet 415 FX w/ Rolly II heads, Woodland Computer Systems, Cummins 6.7 Power

Valmet - 2009
$Call for Price
2020 Ponsse Ergo

2020 Ponsse Ergo

2020 Ponsse Ergo u-1660 8WD Harvester with tracks

- - 2020
$Call for Price
2014 TIMBERPRO TL735B

2014 TIMBERPRO TL735B

Clean inside and out. This processor has been very well cared for. Logmax 7000 XT processing head in nice condition. 8.3 Cummins runs like a top. New main implement pump. New back up camera. New top saw. All new hoses in head wrist. All pressure recently inspected and set by Komatsu. Double grouser pads. Leveling cab. 2 speed travel works as it should. Previously owner operated machine. Undercarriage Super nice machine. Double grouser pads. Leveling cab. 2 speed travel works as it should. Previously owner operated machine. Undercarriage at roughly 85%. We can assist with shipping and financing if needed. Thanks for looking!

- - Unknown
$229,500
2015 PONSSE SCORPION KING

2015 PONSSE SCORPION KING

Nice working processor. Clean inside and out. One set of tracks in good condition go with the machine. Mercedes Benz motor runs great. Auto Lube grease system. Pre heater. Back up Camera. Heat and A/C. C50 100 Crane. Serial number for crane is C010144. Serial number for machine is PONS12FAKAA010103. Tire size is 710-45/26.5 and at 60% roughly. Hydrostatic transmission works as it should. Just over 9,500 hours. Machine is tight. We do take trades depending on what you have and we can also assist with shipping and financing if needed. Thanks for looking!

- - Unknown
$295,000
1998 TIMBCO T415C

1998 TIMBCO T415C

1998 415 c 24,000 Hours with 2006 Rolly 2 with Woodland IFM computer New 1,500 hours ago , air ride seat , injectors , head gasket new pins and bushings on stick boom and stick boom cylinder and tool cylinder New on head 1500 hours ago Saw motor and saw box bearings Rebuild cylinders All pins and bushings Most hydraulic hose's Undercarriage is about 80% except for the pads have more wear We can help with financing and shipping, this is a consignment machine so no trades. You can speak to current owner

- - Unknown
$75,000
2015 KOMATSU 931.2

2015 KOMATSU 931.2

Great condition inside and out. Company one owner machine. 1 set of tracks included with the the sale of the machine. Rotating and leveling cab. Fire supression. Pre Heater. Excellent running 6 cylinder engine. Hydrostatic works as it should. This machine has been very well cared for. 144 series 4 knife processing head. Front rubber if 710/45-26.5 at 60% or better. Rear tires are 710/55-R34 at 60% or better. We do take trades depending on what you have and we can assist with trucking and financing if needed. Thanks for looking!

- - Unknown
$209,500
2016 DEERE 1270G

2016 DEERE 1270G

Excellent working processor, ready for work. 2 sets of tracks pictured are included with the sale price and both are at 95%. John Deere 6090HJ power. Cab has forward and backward leveling. Cab rotates as well. Serial number for machine is 1WJR1270GHGD003516. Hours on machine are 8,840. Owner operated machine and very well cared for. Super straight and clean machine inside and out. Nokian 710/45-26.5 rubber in very good condition all around. 2 speed hydro works and shifts as it should. Processing head is in very good condition. Head is a John Deere model 415. 710 Crane. We do take trades depending on what you have and we can also assist with shipping and financing if needed. Thanks for looking!

- - Unknown
$269,500
2016 BARKO 260B

2016 BARKO 260B

One owner buncher. Clean and straight inside and out. Just turned 1,807 hours. Serial number for machine is 11626023625. 360 rotation 22 inch Quadco head. 6.7 Cummins rated at 225 HP. Pro heater. Heat and A/C. 2 speed travel works as it should. Undercarriage is at 85%. 36 inch single grouser pads. We do take trades depending on what you have and we can assist with financing and trucking if needed. Thanks for looking!

- - Unknown
$295,000