Sort By:   GridGallery
Photo Title
Make Model Year Price
Volvo FC2421C Processor ***SOLD***

Volvo FC2421C Processor ***SOLD***

2012 Volvo FC2421C with Waratah 622B Processing Head. This machine has 11,700 hours, one owner machine, brand new front & door windows, laser end find on 622B, new undercarriage & sprockets this spring, new water pump, very clean machine, excellent condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

Volvo FC2421C 2012
$125,000
Volvo 2421C Processor with a QS500 South Star Head

Volvo 2421C Processor with a QS500 South Star Head

2013 Volvo 2421C Processor with a QS500 South Star Head. This machine has a newer Volvo engine with ~3,000 hours, runs and starts good, Espar heating system, strong hydraulics and cylinders, solid boom, undercarriage is @ 70%, QS500 head and computer are in good working order, tight control, heat, A/C, and lights. A/C will need new compressor. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Volvo 2421C 2013
$239,000
Valmet 911 Processor with a 965 Dangle Head

Valmet 911 Processor with a 965 Dangle Head

2001 Valmet 911 Processor with a 965 Dangle Head. This machine has a 5.9 Cummins engine, runs and starts good, 18,000 hours, newer valve cover gaskets, new batteries, new slew gear on cab, strong hydraulics and cylinders, new link where head connects. New computer screen, head will need some rewiring. Tight boom, bogies are in good order, tires are @ 40%. Heat, A/C needs a charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 911 2001
$44,500
Valmet 911.3 Harvester with a 370.2 Head

Valmet 911.3 Harvester with a 370.2 Head

2005 Valmet 911.3 Harvester with a 370.2 Head. This processor has a Sisu engine, runs and starts good, strong hydraulics and transmission, tight controls. Hour meter reads 16,500 hours, tight boom, new boom cylinder, newer rotator. Tight center section. 370.2 head is in good working order, measuring system working as it should. Recently updated computer system. Heat, A/C, and lights. Good glass. Working daily. Lots of new parts Installed. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. REDUCED FROM 99,900.00

Valmet 911.3 2005
$89,900
Valmet 430FXL Processor with a Rolly II Intermittent Head

Valmet 430FXL Processor with a Rolly II Intermittent Head

2009 Valmet 430FXL Processor with a Rolly II Intermittent Head. This machine runs and starts good, strong hydraulics and pumps, tight pins and bushings in the boom and head. Undercarriage is in good working order, single grouser pads. Rolly II head works good. Good glass. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 430FXL 2009
$Call for Price
Valmet 911.3 Harvester

Valmet 911.3 Harvester

2004 Valmet 911.3 Harvester with a 370.2 Head. This machine runs and starts good, ~12,000 hours, strong hydraulics, solid boom, head is in good working order. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Valmet 911.3 2004
$129,900
Valmet 415EX Harvester ***SALE PENDING***

Valmet 415EX Harvester ***SALE PENDING***

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has 9,700 hours, 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan. Pumps are all in good order, all were recently pressure checked. Undercarriage is @ 80%. Rollers, idlers, sprockets, 24" double grouser pads were all gone through. New Computer DASA 4 one year ago, measuring system is accurate, valve bank rebuilt 1 year ago on the head, feed rollers and grab arms are all in good order, new head rotator. New main boom, no cracks or welds. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SALE PENDING***

Valmet 415EX 2007
$122,500
Valmet 911C Harvester with 965 Head

Valmet 911C Harvester with 965 Head

2000 Valmet 911C Harvester with 965 Head. This machine has a Cummins 6BTA engine, runs and starts good, strong hydraulics, decent cylinders few leaks, boom has some play, may need a little attention, center has a little play, head cuts and works - computer monitor is broken, decent bogies and axles, 600 tires @ 50% with tracks available, 28Lx26 tires in rear. Will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 911C 2000
$22,500
Valmet 415EX Harvester with a Rolly II Head

Valmet 415EX Harvester with a Rolly II Head

2007 Valmet 415EX Harvester with a Rolly II Head. This machine has a 7.3 Sisu engine, runs and starts good, Espar heat system, Cleanfix reversible fan, pumps are all in good order, & were all recently pressure checked, undercarriage is @ 95%. Rollers, idlers, sprockets, & 24” double grouser pads were all gone through. New computer DASA 4 one year ago, measuring system is accurate, valve bank was rebuilt 1 year ago on the head. Feed rollers and grab arms are all in good order, new head rotator, new main boom no cracks or welds. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 415EX 2007
$99,500
Timberpro 725C Processor with Rolly III Head ***SOLD***

Timberpro 725C Processor with Rolly III Head ***SOLD***

2016 TimberPro 725C Processor with a Rolly 3 Head, ~2,100 hours. Woodland cpu, 28" double grouser pads, clean fix fan, Espar preheater - engine, cab, hydraulics, Xenon light package, fire suppression, air ride heated/cooled seat, high speed saw. Cummins 8.3 engine. Very clean, straight and dry machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberpro 725C 2016
$400,000
TimberPro TL735-B Processor with Logmax 7000XT Fixed Head

TimberPro TL735-B Processor with Logmax 7000XT Fixed Head

2014 TimberPro TL735-B Processor with Logmax 7000XT Fixed Head. This machine has a Cummins tier 3 300 HP engine, runs and starts good. 8,100 hours. New injectors, oil pan gasket, and rear engine seal. Pumps resealed and checked. Espar heat engine and hydraulics. Pump drive new input shaft and bearings. All regular maintenance done on schedule, oils changed every 1,000 hours, engine oil every 500 hours. Undercarriage is @ 50%, 24" double grouser pads. Processor head is stronger and more productive than other fixed heads. New Logmate 500 computer and head module. $40,000 in recent updates and work done on machine. New roto bearing on head, new saw motor, new saw bar holder, auto level option, new leveling cylinders, new A/C pump. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberpro TL735-B 2014
$289,000
TimberPro TN725C Processor with a Log Max 7000 Head

TimberPro TN725C Processor with a Log Max 7000 Head

2016 TimberPro TN725-C Processor with a Log Max 7000 Head. This machine has 2,700 hours as of August 30, 2018, Cummins QSC 8.3 - 300 HP engine, Caterpillar D6 size track frames with double-flanged rollers, 24" pads, 6' squirt boom, Lohmann final drives, Rexroth 2-speed motors. 2004 Log Max 7000 has had saw and feed wheel motors replaced, valve bank resealed, new knives, all cylinders repacked. Logmate 400 computer system. Carrier has fire suppression system, Espar pre-heater, deluxe air-ride seat with heat and lumbar support, heat, A/C, and LED lighting. Owner/Operator machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberpro TN725C 2016
$345,000