Featured in Hydro-Ax

Sort By:   GridGallery
Photo Title
Make Model Year Price
2004 Hydro Ax 570 Feller Buncher

2004 Hydro Ax 570 Feller Buncher

2004 Hydro Ax 570 with 22" sidecut 1 owner operator 4650 original hours. Has mostly new carbides newer skylight and front windshield 2 new front firestone tires 30Lx26 Joystick controls heat air heat grid quick couplers and 1 set babac bearpaw chains. Cummins 5.9 does not burn any oil and has zero hydraulic leaks. Very tight machine that was greased daily and well maintained. Ready to work, this buncher can lay down a lot of wood. Retired.

Hydro-Ax 570 22" Sidecut 2004
$70,000
Hydro Ax 221 Feller Buncher ***SOLD***

Hydro Ax 221 Feller Buncher ***SOLD***

1991 Hydro-Ax 221 Feller Buncher with a Timbco SW316 Saw Head. This machine has a 4 cyl. turbo John Deere engine, runs and starts good, no blow by and does not burn oil, strong hydraulics, few minor seeps, new hand clutch, drive system is in good working order, joystick controls, head has a 11 BC bar and chain, strong grab arms and accumulator, no major welds, Tires are @ 40% with DD chains @ 50%, newer saw motor, new rear tire. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 221 1991
$12,900
Hydro Ax 311 Feller Buncher

Hydro Ax 311 Feller Buncher

1983-84 Hydro Ax 311 Feller Buncher. This equipment has a 4 cylinder Deere turbo engine, runs and starts good, hour meter reads 4,200 hours. Good tires all around. Harvester head is a Silver Streak 8’ Stroker Head, also has a Blount shear head with low hours. 2 speed transmission. Good brakes, good heat, windows are in rough shape new Lexan to go with. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 311 1984
$17,500
Hydro Ax 411 Feller Buncher with 16" Shear Head

Hydro Ax 411 Feller Buncher with 16" Shear Head

1985 Hydro Ax 411 Feller Buncher with 16" Shear Head. This equipment has a newer 453 Detroit engine, runs and starts good, quick couplers, strong hydraulics and cylinders, pump was updated, decent pins and bushings, 23.1 x 26 tires @ 50%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 411 1985
$11,900
Hydro Ax 470 Feller Buncher

Hydro Ax 470 Feller Buncher

2005 Hydro Ax 470 Feller Buncher. This machine has a Cummins engine, runs and starts good, new oil pan gasket, in-cooler, hydraulic cooler, new fan. Strong hydraulics and cylinders, joystick machine. 22" Head, 28Lx26 tires - 2 are new. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 470 2005
$40,000
Hydro Ax 470 Feller Buncher

Hydro Ax 470 Feller Buncher

2004 Hydro Ax 470 Feller Buncher. This equipment has a Cummins 6bt engine, runs and starts good, quick couplers. Strong hydraulics and cylinder. Joystick control. New injection pump, new hydrostat pump, transfer case was gone through, gear box was gone through. New disc. 28L x 26 tires 3 are @ 90%, 1 tire is @ 75% with a set of Bear Claw chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hydro-Ax 470 2004
$45,500
Hydro Ax 470 Feller Buncher

Hydro Ax 470 Feller Buncher

HYDRO AX 470 WITH PRENTICE CH-50 HEAD 6 CYL CUMMINS LEVER STEER 28L-26 RUBBER

Hydro-Ax 470 2006
$62,500
Hydro Ax 511E Feller Buncher

Hydro Ax 511E Feller Buncher

1997 Hydro-Ax 511E Feller Buncher. This machine has a 5.9 Cummins engine, runs and starts good, 22" Disc and Koehring head, good condition, tight pins and bushings. Strong hydraulics, newer hydraulic cooler, starter, alternator, and battery. 28Lx26 tires in good condition, heat, A/C needs to be charged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Hydro-Ax 511E 1997
$38,000
Hydro Ax 511EX Feller Buncher

Hydro Ax 511EX Feller Buncher

2001 Hydro Ax 511EX Feller Buncher. This cutter has a 6068 John Deere engine, runs and starts good, newer re-man engine, strong hydraulics and transmission, cylinders are in good working order, tight center section and lift arms, 20" Waratah head, straight disc, newer teeth could be turned. Newer Lexan glass, 28Lx26 tires 50%. Heat a/c and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 511EX 2001
$38,500
Hydro Ax 511EX Feller Buncher

Hydro Ax 511EX Feller Buncher

1996 Hydro Ax 511EX Feller Buncher. This machine has a Cummins 6BT engine, runs and starts good, 7,500 hours, strong hydraulics and cylinders, hydrostats are in good order, tight center section and lift arms, 20" head, straight blade, good teeth, could use turning, heat, A/C, lights. 28L x26 tires - 3 are @ 75%, 1 is @ 30%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Hydro-Ax 511EX 1996
$33,500
Hydro Ax 611 EX Feller Buncher with 22" Koering Head *SOLD*

Hydro Ax 611 EX Feller Buncher with 22" Koering Head *SOLD*

2000 Hydro Ax 611 EX Feller Buncher with 22" Koering Head. This machine has a newer engine, turbo, main drive motor and main pump are all newer, new batteries and cables, main grab arm cylinders are new, all pressures have been tested, set, and checked. New teeth, new glass in cab, main drive gear box and the main hanger bearing were just replaced. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 611 2000
$38,500
Hydro Ax 611EX Feller Buncher ***SOLD***

Hydro Ax 611EX Feller Buncher ***SOLD***

1996-1997 Hydro Ax 611EX Feller Buncher with 22" Koering Saw Head. This machine has a 8.3 Cummings engine, runs and starts good, 11,194 hours, strong hydraulics, tight controls, straight disc, new teeth, new radiator and starter, 28Lx26 tires 40-50%, one set of chains, heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 611EX 1997
$33,900