Chippers For Sale
Photo |
Title
|
Make | Model | Year | Price |
Vermeer BC1800XL Chipper2022 Vermeer BC1800XL Chipper. Hour meter reads 310 hours. 173 HP John Deere diesel. 18in feed opening, swivel discharge chute. Knives have been flipped. Serviced at 275 hours. Brand new knife kit, filters and a spare new rim for additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Vermeer | BC1800XL | 2022 |
$82,500
|
|
Bandit 1850XP Tracked Chipper1998 Bandit 1850XP Track Chipper. Hour meter reads 4,000 hours, unknown if original. New Cummins 250hp engine and new glass. New master switch. Boom and grapple are tight. Ready for work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 1850XP | 1998 |
$81,500
|
|
Vermeer BC1500 Brush Chipper2021 Vermeer BC1500 Brush Chipper. Hour meter reads 246 hours. 15" chipping capacity, 3 knife. Cummins 3.8L diesel engine. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Vermeer | BC1500 | 2021 |
$62,500
|
|
Precision Husky Chipper1992 Precision Husky Chipper. Hours are unknown. KT 600 HP engine starts and runs good. New batteries, oversized cables, master switch, oversized starter, pockets, knife clamps, and counter knives, digital volt meter, and re-cored radiator within the last year. New bearings in feed rear feed wheel, a few new sprockets, drive chains, drive motors for the top feed wheel, rebuilt injector pump, and new hydraulic pump belts within the last 8 months. Also has a new shaft and bearings on the bottom feed wheel. 23" throat. Will fill 42 ton in 30-40 minutes depending on the wood. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Precision | Husky | 1992 |
$60,000
|
|
Morbark 22 RXL Chipper1993 Morbark 22 RXL Chipper. Cummins engine with newer overhaul. Engine has a knock or possible clutch issue. Pan needs to be dropped and inspected. Feed chain is estimated at 40%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Morbark | 22RXL | 1993 |
$58,500
|
|
Morbark 30/36 Whole Tree Chipper1998 Morbark 30/36 Whole Tree Chipper with Cab & Loader. Meter reads 1,200 but is incorrect. 425hp engine. Needs a new clutch or can be replaced before sale for an additional cost. New infeed chain, tires are good, wireless remote included. Owner states drum is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 30/36 | 1998 |
$56,500
|
|
Timberjack 1270 Rail Chipper1995 Timberjack 1270 Rail Chipper. This equipment has 13,200 hours, Re-manufactured Perkins 1006T engine, 160 HP, 6,300 hours on reman. Chipper head is a Bandit 250XP, 2,500 hours, 12" capacity, chipper engine is a Cummins 6BT with 2,200 hours, 145 HP. Loader is a Nokka 3966 23' reach 3,000 LBS. lift capacity, All chipper functions are controlled in the cab. Chipper head can level up to 55%. Eco Tracks and Chains are included. Rail track system. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberjack | 1270 | 1995 |
$53,900
|
|
Bandit Intimidator 15XP Chipper2021 Bandit Intimidator 15XP Chipper. Hour meter reads 1,543 hours. Ford 6.2L 165 HP engine. 37" diameter drum, 2 knife split pocket 5/8" chip. Single axle allow for towing as non-CDL trailer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | Intimidator 15XP | 2021 |
$49,500
|
|
Morbark 1415 Eeger Beever Tow Behind Chipper2022 Morbark 1415 Eeger Beever Tow Behind Chipper. Hour meter reads 622 hours. PSI 2.4L 75 HP gas engine. 31"x60" infeed opening, 14"x15" throat opening. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Morbark | 1415 | 2022 |
$42,500
|
|
Rayco RG1220 Brush Chipper2011 Rayco RG1220 Brush Chipper. Hour meter reads 225 hours. Kubota 66.8 HP engine starts and runs good. Pre-emission engine. 12" chipping capacity with a 12"x20" in-feed opening. Intake rate of 100 fpm. Discharge swivels 360° and at a discharge height of 112". Feed wheel lift and crush handles on both sides. New battery. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Rayco | RG1220 | 2011 |
$38,500
|
|
Morbark Model 16 Disc ChipperMorbark Model 16 Disc Chipper. Hour meter reads 3,500 hours. CAT 3208 engine starts and runs good. Loader with cab. Loader has a rotator for grapple installed with additional pedal. Two chutes included, one for piles and one to load trucks. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | Model 16 | Unknown |
$36,500
|
|
Trelan DL-18 Whole Tree Chipper1985 Trelan DL-18 Whole Tree Chipper. This equipment has a CAT 3406A engine, strong hydraulics, decent cylinders. tight disc bearing, new belts, couple sets of knives. Hood 7000 loader. Infeed and drive chain are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in northcentral USA. |
Trelan | DL-18 | 1985 |
$34,000
|