Featured in Logging Equipment
| Photo |
Title
|
Make | Model | Year | Price |
|
Western Star Truck with Serco 125 Loader & Siiro ***SOLD***1981 Western Star Truck with a 1994 Serco 125 Loader and Siiro 60” slasher Saw. This equipment has good tires all around on truck and slasher, Detroit engine in the truck, runs and starts good, 6 cyl. John Deere power in the loader, few leaks but starts right up and runs out good. Plugin block heater, strong hydraulics and cylinders, boom and grapple have decent pins and bushings. Slasher has straight blade and good teeth. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Serco | 125 | 1994 |
$Call for Price
|
|
Washington 78A Yarder1975 Washington 78A Yarder. Hours are unknown. Cummins 5.9. Three guylines. Cables are all in great shape. Undercarriage is in good working order. Price includes two Washington 78-40s as well. One is a parts machine and the other runs but needs a shaft and torque put back in. Also includes two grapple, a Johnson carriage, an intermedite support, all spare parts, and the stick for backspar. Contact Aaron @ Forestry Equipment Sales. 218-720-0933. Equipment is located in Canada. |
Washington | 78A | 1975 |
$95,000
|
|
Volvo EC220DL with 2015 Propac 453 Delimber2015 Volvo EC220DL with 2015 Propac 453 Delimber. Hour meter reads 12,410 hours. Volvo D6H 165hp engine. 28" triple grouser pads, undercarriage was just redone spring of 2022 & is estimated at 95%. Forestry package, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Volvo | EC220DL | 2015 |
$165,000
|
|
Versalift Mini Lift2006 Versalift Mini Lift. Hour meter reads 2,500 hours. Kubota 3 cylinder engine. Insulated platform and upper boom. 47' working height. Bucket rotates 180°. Hydraulic hookups to run tools. New inner boom track and new insulated & bonded hoses. New teflon skid, wear plates, & filters installed and an inspection. Pistol grip control in basket and manual lower controls. Operator, & parts manuals. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Versalift | Mini Lift | 2006 |
$52,500
|
|
Vermeer BC1800XL Chipper2022 Vermeer BC1800XL Chipper. Hour meter reads 310 hours. 173 HP John Deere diesel. 18in feed opening, swivel discharge chute. Knives have been flipped. Serviced at 275 hours. Brand new knife kit, filters and a spare new rim for additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Vermeer | BC1800XL | 2022 |
$82,500
|
|
Vermeer BC1500 Brush Chipper2021 Vermeer BC1500 Brush Chipper. Hour meter reads 246 hours. 15" chipping capacity, 3 knife. Cummins 3.8L diesel engine. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Vermeer | BC1500 | 2021 |
$62,500
|
|
Valmet Woodstar 546 Forwarder1994 Valmet Woodstar 546 Forwarder. Hours are unknown. Ford 4 cylinder turbo diesel engine. 28Lx26 tires are estimated at 60%, includes a set of double diamond studded ice chains. 600/55-26.5 tires are estimated at 50%. 2019 Hultdins SuperGrip grapple. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | Woodstar 546 | 1994 |
$43,500
|
|
Valmet 921 with 370E Processing Head2001 Valmet 921 with 2005 370E Processing Head. Hours are unknown. Valmet 634 6cyl turbo diesel engine starts and runs good. 750 bogie tires are in good condition, estimated at 80%. Front tires are estimated at 25%. Cranab crane with a 2005 370E processing head, measuring system is in good working order. New cab main bearing 600 hours ago, new A/C compressor in 2022. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Valmet | 921 | 2001 |
$34,900
|
|
Valmet 911.3 Harvester with a 360.2 Head ***SOLD***2006 Valmet 911.3 Harvester with a 360.2 Head. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders. Tight boom and boom base, tight carrier good center section, bogies are in good working order, 710 tires, tracks are @ 70%, chains are @ 90%. 360.2 head has a new roller, grab arm and measuring wheel are in good condition. Maxi computer system, updated saw motor, GB bar system, Joystick controls. Many extra parts joysticks, extra parts head. Heat, A/C, LED lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Valmet | 911.3 | 2006 |
$Call for Price
|
|
Valmet 860 Forwarder1995 Valmet 860 Forwarder. This machine has a rebuilt pump, blade, newer tires, new Pro-Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located n Northcentral USA. |
Valmet | 860 | 1995 |
$64,500
|
|
Valmet 860 Double Bunk 6 Wheel Forwarder2001 Valmet 860 Double Bunk 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders, lift cylinder and bucket cylinder have been rebuilt. Cranab 850XL Crane, SureGip grapple, small leak on jib cylinder, few minor leaks on machine. Runs well, has a new computer. Has a mechanical throttle instead of electrical. Front tires are @ 70%, rear tires are @ 45%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 860 | 2001 |
$46,500
|
|
Valmet 860 6 Wheeled Forwarder2001 Valmet 860 6 Wheeled Forwarder. Hour meter reads 15,000 hours. Sisu engine, starts and runs good. Rear 710-/45-26.5 tires are estimated 40%. Front tires are estimated at 75% with one being new. Set of tracks at 20% are included. New A/C compressor and bogie bearings. Cranab 850 crane with minimal slack and a squirt boom. SureGrip grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 860 | 2001 |
$67,500
|