Sort By:   GridGallery
Photo Title
Make Model Year Price
2007 John Deere 1110D Forwarder

2007 John Deere 1110D Forwarder

New engine 3000 hours ago. Tight loader and center section. Heat and A/C. Preheater. Included in the price is one set of tracks. Squirt boom with G/36 grapple. New hydraulic motor at 13,000 hours. 700 rubber in good working order. New mini levers. This machine is very clean inside and out and has been very well maintained. Owner/ Operated. Hydrostatic transmission shifts excellent with no slippage whatsoever. No cracks or welds. 360 Cranab loader. Bogey bearings are new as well as the front axle brakes. We do take trades depending on what you have and we can also assist with shipping if needed. Thanks for looking!!

- - Unknown
$129,000
Tree Farmer C5D Forwarder with Hood 418 Loader

Tree Farmer C5D Forwarder with Hood 418 Loader

Packa Back Forwarder with 2593 original hours, 3-53 Detroit Diesel engine, 1/5 cord bypass grapple, original Firestone 23.1-26 Forestry Special tires, internal and external lighting, electric ether injector, 2-speed cab heater, clock and fire extinguisher. Simple and reliable machine in very good condition. Always well maintained and ready to work.

Tree Farmer C5D Unknown
$29,900
2006 John Deere 903G Feller Buncher

2006 John Deere 903G Feller Buncher

2006 John Deere 903G, Deere engine, FS-22 hotsaw head w/40% tilt,very good U/C, gauge reads 8800 hours, 33" triple bar pads

- - Unknown
$79,500
Earth Saver P14SHD700 Tub Grinder

Earth Saver P14SHD700 Tub Grinder

EARTHSAVER P14SHD700 just came off of a job last summer. Videos of it working on job are available $65,000

- - Unknown
$65,000
2013 Komatsu XT430-2 Feller Buncher

2013 Komatsu XT430-2 Feller Buncher

Very nice owner operated buncher here. 9,537 hours. Clean inside and out. Heat & A/C. 360 degree rotation head. Cummins power runs excellent! New teeth on cutting disk. 24 inch pads. Good undercarriage at roughly 80%. Quadco head. Model is QFH. Serial number is 21SC163 for head. Preheater. We do take trades depending on what you have. Hydraulics are very strong. Excellent track power. Please feel free to call us as well. We can also assist with trucking if needed. Thanks for looking!!

- - Unknown
$189,500
Franklin 170 Feller Buncher with Shear Head ***SOLD***

Franklin 170 Feller Buncher with Shear Head ***SOLD***

Franklin 170 Feller Buncher with Shear Head. This machine has a Detroit 453 engine newer head, recently tuned up, strong transmission, hydraulics and cylinder are in good order, 18" shear head is in good working condition, 28L x 26 tires with bear claw chains, heat, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Franklin 170 Unknown
$9,900
Clark Ranger 666D Skidders

Clark Ranger 666D Skidders

2 Clark Ranger 666D Skidders - One of these machines was working until recently and the other one is a parts machine & is missing the transmission & a few other parts. In the pictures, the parts machine is the one with only 2 tires on it, it's missing the rear tires/wheels. Notice the working machine has a very bad blade, but the one on the parts machine could be switched to the running machine, but it will also need some welding to get it in good shape. Both have 5.9 Cummins, but the parts machine engine will need some work. Both machines have winches & grapples. Parts machine includes: 5.9 Cummins that needs work Radiator with grill/guard Clark winch Front & rear axles 2 good 23.1x26 tires w/ rims Blade Hydraulic cylinders Log arch with rollers Muffler guard on top of cab Belly pan guards & engine side panels Valves Driveshaft(s) Hoses Cradle assembly Sweeps (bars from front of hood to top of cab) The complete machine and the parts from the parts machine should fit in a 40' container. Both machines are currently located near the port of Savannah Georgia at a facility that can dismantle & containerize them. We estimate $9,000 for dismantling & containerizing both machines, including ocean freight to Paramaribo Suriname or Georgetown Guyana, so approximate total cost including delivery would be $28,500. Contact Kelly @ Red Pine Equipment 218-720-0933. ***REDUCED TO $19,500 FROM $26,500***

Clark Ranger 666D Unknown
$19,500
Hood S-182 Slasher

Hood S-182 Slasher

HOOD S-182 SLASHER ON A 1984 KENWORTH SLASHER HAS A 6 CYL ALLIS CHALMERS

Hood S-182 Unknown
$24,900
Bell Ultra C Feller Buncher

Bell Ultra C Feller Buncher

1998 Bell Ultra C Feller Buncher. This buncher has a Newer Cummins 4BT 3.9 Engine at 100 HP, 28Lx26 Tires @ 40%, new chains, hour meter reads 9,500 hours, Bell 33” directional head, head has been gone through, new pins and bushings, new hoses, strong hydraulics and cylinders. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Bell - Unknown
$45,900
(4) Clark Ranger 667F Skidders

(4) Clark Ranger 667F Skidders

(4) Clark Ranger 667F Skidders for sale. All 4 skidders are in working condition. Winches are not installed on all machines, but winch, driveshaft & controls are included with each machine. Contact Kelly @ Red Pine Equipment 218-720-0933. Machines are located in Canada.

Clark Ranger 667F Unknown
$Call for Price
Morbark 2455 Total Flail Chiparvestor Combo Parts Machine

Morbark 2455 Total Flail Chiparvestor Combo Parts Machine

Morbark 2455 Total Flail Chiparvestor Combo Parts Machine. This is a non running machine but has many usable parts: augers, flail, axles, turn table, cab cylinders. Contact Aaron @ Red Pine Equipment 218-720-0933 for more information. Equipment is located in Northcentral USA.

Morbark 2455 Unknown
$Call for Price
Truck Mounted Serco 800 loader with Slasher Saw ***SOLD***

Truck Mounted Serco 800 loader with Slasher Saw ***SOLD***

Serco 8000 Loader on a 1979 Ford 9000 Truck with a 60" Hood Slasher Saw. According to owner, truck has a 671 Detroit that runs well with a 4x4 manual transmission. Serco 8000 loader with heat, windshield is cracked. Nice tight machine with a few minor hydraulic leaks. 4 cylinder John Deere power plant for loader, runs and starts good, new hydraulic pump, fresh fuel filters and oil change. 60" Hood slasher with adjustable back stop - 100" to 124" bunk in good shape, some cracks on slasher have been welded. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ral USA. ***SOLD***

Serco 8000 Unknown
$15,000