Sort By:   GridGallery
Photo Title
Make Model Year Price
Komatsu XT445L with Quadco 22B 40° Head

Komatsu XT445L with Quadco 22B 40° Head

2012 Komatsu XT445L with Quadco 22B 40° Head. Hour meter reads 12,000 hours. 24" single grouser pads, undercarriage is estimated at 80%. Quadco 22B with 40° rotation, disc and felling head are in good condition. Leveling system. Pins and bushings are tight. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Komatsu XT445L 2012
$155,000
TimberPro TF830B Forwarder ***SOLD***

TimberPro TF830B Forwarder ***SOLD***

2012 TimberPro TF830B Forwarder. Hour meter reads 8,017 hours. Cummins QSC 8.3L tier 3 engine starts and runs good. 710/45-26.5 tires are estimated at 80%. Espar preheater. SuperGrip bypass grapple and straight bunks. Fuel pump in belly, 2 batteries, alternator, new swing bearing, & brakes all done within the last two years. Cab has heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timberpro TF830B 2012
$205,000
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2012 Ponsse Ergo Harvester with H7 Head with big saw box. Hour meter reads 11,675 hours, Mercedes Benz engine, runs and starts good. Complete service by Ponsse at 11,200 hours. Updated fire suppression system, tight C4 crane, strong hydraulics and cylinders. 2 sets of tracks @ 95%. 710 tires, pre-heater. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***PRICE REDUCED FROM $240,000***

Ponsse Ergo 2012
$219,900
Ponsse Ergo Harvester with H7 Harvesting Head

Ponsse Ergo Harvester with H7 Harvesting Head

2012 Ponsse Ergo 8 Wheeled Harvester with H7 Harvesting Head. Hour meter reads 17,500 hours. 710/45-26.5 tires are estimated at 50%, one tire could be replaced. Newer Webasto preheater. Auto-grease system. Bottom section of the valve bank was recently rebuilt, two new lower knives, H7 harvesting head is in good working order. Upper center has some slack and could be rebuilt. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Ponsse Ergo 2012
$120,000
Barko Dynamic DC-50 Discone Chipper

Barko Dynamic DC-50 Discone Chipper

2012 Barko Dynamic DC-50 Discone Chipper. Hour meter reads 36 hours. Cummins QSB 3.3L, 12" discone drum chipper. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko Dynamic DC-50 2012
$33,500
Ponsse Buffalo King Forwarder

Ponsse Buffalo King Forwarder

Salvaged 2012 Ponsse Buffalo King 8 Wheel Double Bunk Forwarder. This forwarder burnt up from the front. Many parts are still good, K100 crane and grapple, all bunks still good, tires rims, bogies, there was 9,000 hours on machine, headache rack, blade, grill. Many other parts available. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Buffalo King 2012
$25,000
Ponsse Buffalo Forwarder

Ponsse Buffalo Forwarder

2012 Ponsse Buffalo Forwarder. Hour meter reads 16,000 hours. Mercedes tier 3 engine. 710/45-26.5 tires are estimated at 25%, will need a few new rear tires. Main boom was recently replaced, K100+ crane with tilting crane base, Grippen 35HD grapple is in good condition. New joysticks. 3600mm rear frame, rear tether hitch, & blade. Heat, A/C, radio, lights, & rearview camera. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.

Ponsse Buffalo 2012
$162,500
John Deere 953K Feller Buncher with FR24B Head

John Deere 953K Feller Buncher with FR24B Head

2012 John Deere 953K Feller Buncher with FR24B Head. Hour meter reads 5,325 original hours. John Deere 6090H engine. 24" single grouser pads, undercarriage is estimated at 60%. FR24B felling head is in good condition, blade is good, few welds, pins and bushings are tight. AFEX fire suppression system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 953K 2012
$162,500
John Deere 848H Skidder

John Deere 848H Skidder

2012 John Deere 848H Grapple Skidder with Winch. Hour meter reads 9,000 hours. John Deere 6068H engine. Torque converter transmission. 35.5 tires are estimated at 70%. Grapple is tight and winch is in good working order. Heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 848H 2012
$135,000
John Deere 703 JH Processor ***ON HOLD***

John Deere 703 JH Processor ***ON HOLD***

2012 John Deere 703 JH Processor with a Waratah 622B Processing Head. Well maintained machine with a 6081 Engine that starts and runs good. Has Proheat - works great. New pumps on carrier and a lot of new parts and hoses in head last spring. New saw motor, saw housing, resealed main valve in head. Alpine feed wheels. New glass. 26" double grouser pads, undercarriage is in good working condition. Stereo, Heat, & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

John Deere 703JH 2012
$144,500
John Deere 703JH with Waratah HTH622B Harvesting Head

John Deere 703JH with Waratah HTH622B Harvesting Head

2012 John Deere 703JH with Waratah HTH622B Harvesting Head. Hour meter reads 14,020 hours. 24" single grouser pads, undercarriage is estimated at 30%. Main saw motor resealed July 2021, new computer on head December 2021, new encoders on saw and diameter. New computer for the head, can include a spare. Espar preheater. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 703JH 2012
$83,500
 John Deere 648GIII Skidder

John Deere 648GIII Skidder

2012 John Deere 648GIII Grapple Skidder with Winch. Hour meter reads 3,106 hours, runs and starts good with a newer engine & transmission, receipts available upon request. 20,000 frame hours. Strong hydraulics, winch is in good working condition, grapple clasps and spins. 30.5x32 tires are estimated @ 50%. Both rear ends have been recently resealed and boom cylinders packed within the last year. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 648GIII 2012
$61,500