Photo |
Title
|
Make | Model | Year | Price |
Ponsse Ergo Harvester with H73E Harvesting Head2004 Ponsse Ergo 6 Wheeled Harvester with 2007 H73E Harvesting Head. Hour meter reads 15,925 hours. 710/45-26.5 tires are estimated at 65%. 2007 H73E head is in good overall condition. All lights are working. Heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2004 |
$46,500
|
|
Ponsse Bear Harvester with H8 Head2022 Ponsse Bear 8W Harvester with H8 Head. Hour meter reads 2,124 hours. 750/55-26.5 tires estimated at 80%, two sets of tracks are included that are in good condition. Webasto preheat system. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Bear | 2022 |
$715,000
|
|
Ponsse Ergo Harvester with H7 Head2012 Ponsse Ergo Harvester with H7 Head with big saw box. Hour meter reads 11,675 hours, Mercedes Benz engine, runs and starts good. Complete service by Ponsse at 11,200 hours. Updated fire suppression system, tight C4 crane, strong hydraulics and cylinders. 2 sets of tracks @ 95%. 710 tires, pre-heater. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***PRICE REDUCED FROM $240,000*** |
Ponsse | Ergo | 2012 |
$219,900
|
|
Ponsse Bison Forwarder ***ON HOLD***2001 Ponsse Bison 6 Wheel Double Bunk Forwarder. This equipment has a newer Mercedes Benz 4 cylinder engine with approximately 6,000-7,000 hours, runs and starts good. 13,000 total machine hours. New center pins and big bearing. New rear brake, new controller, strong hydraulics and cylinders. Tight boom and grapple. Heat, A/C, and lights. Tires are in good working order with a set of tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Ponsse | Bison | 2001 |
$87,500
|
|
Ponsse Ergo Harvester with H7 Head2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2005 |
$99,900
|
|
Ponsse Cobra HS10 Harvester with a Ponsse H53 Head1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Ponsse | Cobra HS10 | 1998 |
$38,500
|
|
Ponsse Wisent 8W Forwarder ***SOLD***2016 Ponsse Wisent 8W Double Bunk Forwarder. Hour meter reads 6,167 hours. Mercedes 173hp engine starts and runs good. 710x26.5 tires are estimated at 85%. K70 crane with a tight extendaboom & SuperGrip grapple. Strong hydraulics and hydrostatic-mechanical drive system. Front Blade, Webasto preheat system, 710 tires @ 85% with a set of Eco tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Ponsse | Wisent | 2016 |
$Call for Price
|
|
Ponsse Ergo with H8 Harvesting Head2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 1,225 hours. Mercedes OM 936 Stage V/Tier 4F engine. 710/45-26.5 tires are estimated at 90%, tracks can be included. C44+ crane with an H8 harvesting head. Center and crane are tight. Webasto preheat system. Active Frame. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2022 |
$675,000
|
|
Ponsse Fox 8 Wheel Harvester with a H6 Head ***SOLD***2011 Ponsse Fox 8 Wheel Harvester with a H6 Head. Hour meter reads 14,000 hours. Mercedes Benz engine starts & runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. H6 head is in good working order. 700 tires at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Ponsse | Fox | 2011 |
$Call for Price
|
|
Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head2010 Ponsse Fox 8 Wheel Harvester with a 2015 H6 Head. Hour meter reads 13,000 hours. Mercedes Benz engine starts and runs good, Webasto preheat system, fire suppression system, & computer and measuring system are all in good working order. Strong hydraulics and cylinders, tight parallel boom and base, squirt boom works as it should. 2015 H6 head is in good working order. 700 tires estimated at 75% with one set of Eco Tracks. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Fox | 2010 |
$Call for Price
|
|
Ponsse Buffalo King ForwarderSalvaged 2012 Ponsse Buffalo King 8 Wheel Double Bunk Forwarder. This forwarder burnt up from the front. Many parts are still good, K100 crane and grapple, all bunks still good, tires rims, bogies, there was 9,000 hours on machine, headache rack, blade, grill. Many other parts available. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Buffalo King | 2012 |
$25,000
|
|
Ponsse Wisent Forwarder2006 Ponsse Wisent 8 Wheel Double Bunk Forwarder. This machine has a Mercedes Benz engine, runs and starts good, Pro Heat, new transmission last year installed by Ponsse, new rear-end installed last fall, bogies are in good working order, tight boom and grapple, squirt boom works as it should, decent 710 tires, blade. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Wisent | 2006 |
$110,000
|