Sort By:   GridGallery
Photo Title
Make Model Year Price
Timberjack 450C Skidder

Timberjack 450C Skidder

1995 Timberjack 450C Grapple Skidder with Winch. Cummins 5.9 engine. Power Shift transmission. 30.5x32 tires are estimated at 35%. Gearmatic 19 winch is in good working order. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timberjack 450C 1995
$42,500
John Deere 748GIII Skidder

John Deere 748GIII Skidder

2000 John Deere 748GIII Grapple Skidder with Winch. Hour meter reads 19,000 hours. John Deere 6081H engine, power-shift transmission. 30.5x32 tires are estimated at 80%.Fresh service & paint. Has been used to pull logs across a field. Winch works well, grapple is tight, blade in good condition. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748GIII 2000
$42,500
Morbark 1415 Eeger Beever Tow Behind Chipper

Morbark 1415 Eeger Beever Tow Behind Chipper

2022 Morbark 1415 Eeger Beever Tow Behind Chipper. Hour meter reads 622 hours. PSI 2.4L 75 HP gas engine. 31"x60" infeed opening, 14"x15" throat opening. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Morbark 1415 2022
$42,500
Barko 295 Loader with CSI Delimber & Bucksaw

Barko 295 Loader with CSI Delimber & Bucksaw

2003 Barko 295 Loader with CSI Delimber & Bucksaw. Hour meter reads 11,000 hours. Cummins 6BT engine starts and runs good. Delimber and bucksaw are in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Barko 295 2003
$43,500
Valmet Woodstar 546 Forwarder

Valmet Woodstar 546 Forwarder

1994 Valmet Woodstar 546 Forwarder. Hours are unknown. Ford 4 cylinder turbo diesel engine. 28Lx26 tires are estimated at 60%, includes a set of double diamond studded ice chains. 600/55-26.5 tires are estimated at 50%. 2019 Hultdins SuperGrip grapple. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet Woodstar 546 1994
$43,500
Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber

Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber

2012 Prentice 2384B Loader with CSI 4400 Buck Saw and CTR 426 Delimber. Hour meter reads 14,000 hours. Reman hydraulic pump and pilot pump. Boom is straight, minimal slack. CSI 4400 Buck Saw with an 18' table. CTR 426 delimber is in good working order. John Evans trailer. Cab has heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Prentice 2384B 2012
$43,500
Timberjack 1210 8-Wheeled Forwarder

Timberjack 1210 8-Wheeled Forwarder

1995 Timberjack 1210 8-Wheeled Forwarder. This machine has a Perkins engine, around 20,000 hours, rebuilt cylinders, tight center, boom has normal wear, 600 tires @ 50%, tracks in back, bogies in good working condition, has heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberjack 1210 1995
$44,500
Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher

Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher

1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko 160D 1999
$44,500
CAT 559DS Log Loader

CAT 559DS Log Loader

2007 CAT 559DS Log Loader. Hour meter reads ~11,000 hours. CAT engine, runs and starts good. Strong hydraulics and cylinders. Carrier and hydraulic landing gear are in good working order. Tight boom, 360 grapple. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

CAT 559DS 2007
$44,500
Serco 170 Loader with Siiro 60" Slasher

Serco 170 Loader with Siiro 60" Slasher

1993 Serco 170 Loader with Siiro 60" Slasher. John Deere engine starts and runs good. Loader sits on a 1979 Mack truck that works well. Loader is tight, has a brand new main lift cylinder. Blade is straight, new teeth. Hydraulic landing gear works as it should. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Serco 170 1993
$44,500
Timberjack 460D Skidder

Timberjack 460D Skidder

2001 Timberjack 460D Single Arch Grapple Skidder with Winch. Hour meter reads 12,000 hours. John Deere 6068 engine, powershift transmission. 30.5x32 tires are estimated at 90%. Center pins have a little slack. Recently serviced. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 460D 2001
$44,500
John Deere 903J Feller Buncher with FR22 Head

John Deere 903J Feller Buncher with FR22 Head

2008 John Deere 903J Feller Buncher with FR22 Head. Hour meter reads ~18,000 hours. Engine was redone at 12,500 hours. John Deere 6081H engine starts and runs good. Boom and stick bushing have been done at 15,000 hours. Strong hydraulics and cylinders. 24" single grouser pads, undercarriage is at 40%. Enclosed cab has heat, A/C, lights, Sure Grip joystick controls, & TMC computer system. FR22 head is 360° rotating. Saw and carbide teeth are in good shape. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 903J 2008
$44,900