Sort By:   GridGallery
Photo Title
Make Model Year Price
TimberPro TF830B Forwarder ***SOLD***

TimberPro TF830B Forwarder ***SOLD***

2012 TimberPro TF830B Forwarder. Hour meter reads 8,017 hours. Cummins QSC 8.3L tier 3 engine starts and runs good. 710/45-26.5 tires are estimated at 80%. Espar preheater. SuperGrip bypass grapple and straight bunks. Fuel pump in belly, 2 batteries, alternator, new swing bearing, & brakes all done within the last two years. Cab has heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Timberpro TF830B 2012
$205,000
Tigercat 630D Skidder ***ON HOLD***

Tigercat 630D Skidder ***ON HOLD***

2012 Tigercat 630D Grapple Skidder with Winch. Hour meter reads 15,500 hours. Newer engine with 1,500 hours, & fuel injection pump with 1,000 hours. Winch is in good working order. 30.5x32 tires are estimated at 80%, new tires for the rear can be included for an additional cost. Includes ring chains. Webasto preheater. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***ON HOLD***

Tigercat 630D 2012
$Call for Price
Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber

Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber

2012 Prentice 2384B Loader with CSI 4400 Buck Saw and CTR 426 Delimber. Hour meter reads 14,000 hours. Reman hydraulic pump and pilot pump. Boom is straight, minimal slack. CSI 4400 Buck Saw with an 18' table. CTR 426 delimber is in good working order. John Evans trailer. Cab has heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

Prentice 2384B 2012
$43,500
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2012 Ponsse Ergo Harvester with H7 Head with big saw box. Hour meter reads 11,675 hours, Mercedes Benz engine, runs and starts good. Complete service by Ponsse at 11,200 hours. Updated fire suppression system, tight C4 crane, strong hydraulics and cylinders. 2 sets of tracks @ 95%. 710 tires, pre-heater. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***PRICE REDUCED FROM $240,000***

Ponsse Ergo 2012
$219,900
Ponsse Buffalo King Forwarder

Ponsse Buffalo King Forwarder

Salvaged 2012 Ponsse Buffalo King 8 Wheel Double Bunk Forwarder. This forwarder burnt up from the front. Many parts are still good, K100 crane and grapple, all bunks still good, tires rims, bogies, there was 9,000 hours on machine, headache rack, blade, grill. Many other parts available. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Buffalo King 2012
$25,000
Ponsse Buffalo Forwarder

Ponsse Buffalo Forwarder

2012 Ponsse Buffalo Forwarder. Hour meter reads 16,000 hours. Mercedes tier 3 engine. 710/45-26.5 tires are estimated at 25%, will need a few new rear tires. Main boom was recently replaced, K100+ crane with tilting crane base, Grippen 35HD grapple is in good condition. New joysticks. 3600mm rear frame, rear tether hitch, & blade. Heat, A/C, radio, lights, & rearview camera. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.

Ponsse Buffalo 2012
$162,500
Morbark 2355 Flail Chiparvestor

Morbark 2355 Flail Chiparvestor

2012 Morbark 2355 Flail Chiparvestor. Hour meter reads 17,000 hours. CAT C27 engine that was gone through a few years ago. 3 knife, liners are good, flails are in good condition. New PTO system in 2022. Needs new rubbers inside the flails. Includes spare bearings, conveyor chains, flail rods, & filters. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

Morbark 2355 2012
$270,000
Komatsu XT445L with Quadco 22B 40° Head

Komatsu XT445L with Quadco 22B 40° Head

2012 Komatsu XT445L with Quadco 22B 40° Head. Hour meter reads 12,000 hours. 24" single grouser pads, undercarriage is estimated at 80%. Quadco 22B with 40° rotation, disc and felling head are in good condition. Leveling system. Pins and bushings are tight. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Komatsu XT445L 2012
$155,000
John Deere 437D Loader

John Deere 437D Loader

2012 John Deere 437D Loader with a CSI Ground Saw and Delimber. This equipment has 11,000 hours, runs and starts good, strong hydraulics and cylinders, tight boom and grapple, tight controls, swing gear is in good working order, carrier has good brakes and tires, ground saw and delimber are in good working condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Located in Southeast USA.

John Deere 437D 2012
$86,500
John Deere 953K Feller Buncher with FR24B Head

John Deere 953K Feller Buncher with FR24B Head

2012 John Deere 953K Feller Buncher with FR24B Head. Hour meter reads 5,325 original hours. John Deere 6090H engine. 24" single grouser pads, undercarriage is estimated at 60%. FR24B felling head is in good condition, blade is good, few welds, pins and bushings are tight. AFEX fire suppression system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 953K 2012
$162,500
John Deere 1270E Harvester with a H480C Head

John Deere 1270E Harvester with a H480C Head

2012 John Deere 1270E Harvester with a H480C Head. Hour meter reads 8,000 hours, John Deere engine, runs and starts good, strong hydraulics and cylinder, transmission is in good working condition. Tight center section, squirt boom and base are in good order. Hoses are all good. Wabasto preheat system. New windshield, rest of the glass is in good order. H480C head and Timbermatic measuring system are in good working condition. Good tires and Eco-tracks front and back. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 1270E 2012
$225,000
John Deere 703 JH Processor ***ON HOLD***

John Deere 703 JH Processor ***ON HOLD***

2012 John Deere 703 JH Processor with a Waratah 622B Processing Head. Well maintained machine with a 6081 Engine that starts and runs good. Has Proheat - works great. New pumps on carrier and a lot of new parts and hoses in head last spring. New saw motor, saw housing, resealed main valve in head. Alpine feed wheels. New glass. 26" double grouser pads, undercarriage is in good working condition. Stereo, Heat, & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

John Deere 703JH 2012
$144,500