Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Tigercat 822C Feller Buncher ***SOLD***2010 Tigercat 822C Feller Buncher. Hour meter reads 7,300 hours. 24" double grouser pads, undercarriage is estimated at 30%, unit can include a new complete & installed undercarriage for $220,000. Webasto preheat system. Tigercat 5400 felling head is in good condition. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Tigercat | 822C | 2010 |
$200,000
|
|
Diamond Z 1136 Tub Grinder2010 Diamond Z 1136 Tub Grinder. Hour meter reads 3,700 hours. CAT C13 engine starts and runs good, 500hp. Crate of additional parts included. Oil analysis checks out great. Used mostly for regrind. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Diamond Z | 1136 | 2010 |
$190,000
|
|
2010 TIGERCAT H822C2010 TIGERCAT H822C TRACKED SAWHEAD 8.3 CUMMINS 5702 TIGERCAT HEAD |
Tigercat | H822C | 2010 |
$189,000
|
|
John Deere 1110E Forwarder2010 John Deere 1110E Forwarder. Hour meter reads 13,950 hours. John Deere 6068T engine. 710/45-26.5 tires are estimated at 50%. Supergrip bucket, tight CF510 crane & center section. Blade is in good condition. Espar preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 1110E | 2010 |
$185,000
|
|
2010 John Deere 1410D ForwarderJOHN DEERE 1410D 8 WHEELED FORWARDER 6 CYL HYDROSTATIC 2 STAGE BOOM ONE OWNER 700X26.5 RUBBER |
John Deere | 1410D | 2010 |
$169,000
|
|
2010 PRENTICE 23462010 PRENTICE 2346 DOUBLE BUNK FORWARDER 4 CYL CAT POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM BYPASS BUCKET 23.1-26 FRT 600/55-26.5 REAR |
Prentice | 2346 | 2010 |
$169,000
|
|
Ponsse Ergo with H7 Harvesting Head2010 Ponsse Ergo with H7 Harvesting Head. Hour meter reads 19,789 hours. Mercedes Benz engine. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 40%, includes a set of tracks that are estimated at 85%. Head pump was done. Fiber clutch and pumps were done at 14,500 hours. H7 harvesting head has new knives and bushings. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2010 |
$167,500
|
|
Ponsse Ergo with Ponsse H7 Processing Head2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2010 |
$150,000
|
|
John Deere 1010E 6 Wheeled Forwarder2010 John Deere 1010E 6 Wheeled Forwarder. Hour meter reads 13,002 hours. John Deere 4045 engine. New drive motor, hydraulic pump, & hydraulic motor. Stick cylinder was just resealed. Front tires are estimated at 80%, rear tires are estimated at 50%. Includes a set of ice chains. Rotating cab. Bunks are straight and boom is tight. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 1010E | 2010 |
$140,000
|
|
John Deere 1470E with H290 Processing Head2010 John Deere 1470E with H290 Processing Head. Hour meter reads ~16,000 hours. John Deere 6090H engine starts and runs good. Very dry engine bay, no leaks or buildup. 750/55-26.5 tires on the rear are at 55%. 700/70R34 tires on the front are at 80%. This machine has a tight and dry center section and boom. AFEX fire suppression system, Webasto preheater, self-leveling cab, & Timbermatic computer system. H290 processing head is in good shape, feeders and roller work as they should. Owner operated. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 1470E | 2010 |
$131,500
|
|
CAT 501HD with PF48 4 Roller Processing Head2010 CAT 501HD with PF48 4 Roller Processing Head. Hour meter reads 9,300 hours. CAT C6.6 engine starts and runs good. 24" double grouser pads, undercarriage is estimated at 60%. Two new delimbing cylinders, measuring wheel, encoder. New data line from the computer to the head, and final drive. Fully serviced, ready to work. Heat, A/C, lights, & satellite radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
CAT | CAT501HD | 2010 |
$110,000
|
|
Ecolog 590D with LogMax 7000 Dangle Head2010 Ecolog 590D with LogMax 7000 Dangle Head. Hour meter reads 17,813 hours. Mercedes 926 engine. 710/55-34 & 710/50-30.5 bogie tires are estimated at 75% or greater. Valve bank was just rebuilt, all new O-rings. Unit has some welding in the center and on the boom. LogMax 7000 dangle head, variable feed wheels, housing in good condition, pump is newer with 5,500 hours. Webasto preheat system, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
EcoLog | 590D | 2010 |
$100,000
|