Featured in Logging Equipment

2005 Ponsse Ergo 6 Wheeled Harvester with H7 Harvesting Head. Hour meter reads 13,491 hours. Refurbished by Ponsse in 2016 & 2022. 710/45-26.5 tires are estimated at 75%. Front tires are estimated at 70%. Includes a set of tracks estimated at 70%. Auto-grease and webasto preheat systems. H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. New head pump. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Timberjack 1270D Harvester with a 2012 Waratah H270 Head. This equipment has a John Deere 6081 engine, runs and starts good, Espar pre heat. Timbermatic 300 computer in good working order. Strong hydraulics, and cylinders. Tight boom and head, boom base has been reworked, replaced cylinder, extended boom has been redone, 700 tires and tracks, tracks are @ 70%, new front glass, sides are in good shape, cab rotation and level is in good working order. Heat, A/C, lights and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Fabtek 133 with Fabtek 4 Roller Processing Head. Hour meter reads 18,979 hours, crane hours read 8,635 hours. John Deere 6068 engine. 24" double grouse pads, undercarriage is estimated at 90%. Proheat preheat system. FT18 processing head has good feed wheels, minimal welding, & working measuring system. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Ponsse Ergo Harvester. Hour meter reads 15,500 hours. This unit runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.