Featured in Logging Equipment

NO FEATURED LISTINGS TO DISPLAY

Sort By:

Photo	Title	Make	Model	Year	Price
	Fabtek 546B Forwarder 1999 Fabtek 546B 6 Wheel Forwarder. Hour meter reads 7,399 hours. John Deere engine starts and runs good. 30.5x32 tires in the front estimated at 25%. 700 tires in the rear are estimated at 70%. Center and crane are tight. Heat, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	546B	1999	$82,500
	1999 FABTEK 548B 1999 FABTEK 548B 8 WHEELED DOUBLE BUNK FORWARDER 6 CYL DEERE POWERSHIFT EXTENDABOOM BYPASS BUCKET JOYSTICK CONTROLS 700 RUBBER	Fabtek	548B	1999	$74,900
	Timberjack 1010B Forwarder 1999 Timberjack 1010B 6W Forwarder. Frame hours are unknown. Hour meter shows 23,000 hours, but is not working. Cummins 4BT engine starts and runs good. Double squirt boom. New center pins, line bored. 70/50-26.5 tires are estimated at 50%, the front two are agricultural tires and could be replaced. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Timberjack	1010B	1999	$65,000
	John Deere 548GII Grapple Skidder with a Winch 1999 John Deere 548GII Grapple Skidder with a Winch. This equipment runs and starts good, new engine @ 9,000 hours, 12,300 total hours. Strong hydraulics and transmission, tight center section, winch is in good working order, 28Lx26 tires, bear claw chains, heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	John Deere	548GII	1999	$57,500
	Tree Farmer C5F Forwarder *SOLD* 1999 Tree Farmer C5F Forwarder. Reman Cummins 4BT engine starts and runs good. 4 speed Franklin PowerShift automatic transmission shifts well. 23.1x26 tires are estimated at 60%. 10 hours on valve bank & hydraulic pump. Franklin 4600 Magnum Loader. Heat, A/C, lights, and pilot controls. Can be sold with new tires for $68,000 or used tires for $58,000. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *SOLD*	Tree Farmer	C5F	1999	$54,900
	Hyundai 130 Processor with LogMax 750 Head 1999 Hyundai 130 Processor with a 2002 LogMax 750 Head. This equipment has a rebuilt head in 2015, brand new Cummins engine, runs and starts good, one year warranty on engine, 28" bar & chain, 26" cut, same as a 7000 LogMax, extra computer & feed rollers, undercarriage is @ 60%, strong hydraulics, tight boom, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Hyundai	130	1999	$53,500
	John Deere 640GII Skidder 1999 John Deere 640GII Cable Skidder. Hour meter reads 15,000 hours. Rebuilt John Deere 6 cyl. engine at 11,000 hours. PowerShift transmission. 23.1x26 tires are estimated at 50%. New radiator, alternator, & injectors. Winch is in good working order. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.	John Deere	640GII	1999	$53,500
	Timberjack 608 Feller Buncher *SOLD* 1999 Timberjack 608 Feller Buncher with Quadco 22 Head. Hours are unknown. Cummins 5.9L engine starts and runs good. 24" double grouser pads, undercarriage is estimated at 80%. Quadco 22" 40° head is in good condition, disc & teeth are good. Boom is tight. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *SOLD*	Timberjack	608	1999	$47,500
	Timberjack 1270 Harvester with a 762C Head 1999 Timberjack 1270 Harvester with a 762C Head. This machine has a 466E Navistar 6 cylinder engine, runs and starts good, 1,500 hours on a total engine rebuild, strong hydraulics, few minor leaks, tight pins and bushing, squirt boom is in good order, joystick controls are in good working condition, 700 tires a few nicks, grab arms and rollers are in working order, good glass. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Timberjack	1270	1999	$46,900
	Komatsu PC200 LC-6 with a ProPac 453 Delimber 1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. Hour meter reads 20,000 hours. This equipment has a Komatsu engine, undercarriage is in fair condition but has never been changed, one owner. Has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Komatsu	PC200 LC-6	1999	$45,900
	Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher 1999 Barko 160D Truck Mounted on a Mack with s 60" Siiro Slasher. This equipment has an estimated 17,000 hours, 60" Siirro slasher table is in good working order. Rotobec grapple, Cummins 5.9 runs and starts good. Exhaust was just resealed, injectors were just resealed as well. Accumulator manifold was just resealed less then 200 hours ago. Pilot pump rebuilt 1,000 hours ago, right bank valve body rebuilt 1,500 hours ago. Swing pump rebuilt 1,500 hours ago, main pump was rebuilt 2,000 hours ago. Joystick controls. New LED lights. Heat. A/C is not working CB. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Barko	160D	1999	$44,500
	Timberjack 1270B Harvester with a 762C Head 1999 Timberjack 1270B Harvester with a 762C Head. This unit has an International DT 466 engine, runs and starts good, preheat system, &strong hydraulics and cylinders. Pump and hydrostats are in good working order, joystick controls, one joystick has been recently rebuilt, tight boom, boom base has new bearings. 762C head and measuring system is in good condition, 26" bar, new end coder and diameter censor, also has 3 sets of feed rollers, peeling rollers, spiked rollers and rubber rollers. Good front glass installed recently. 600 tires with tracks and chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Timberjack	1270B	1999	$39,500