Featured in Logging Equipment

NO FEATURED LISTINGS TO DISPLAY

Sort By:

Photo	Title	Make	Model	Year	Price
	Timberjack 810B Forwarder 1996 Timberjack 810B 8 Wheel Forwarder. Hour meter reads 15,000 hours. Cummins 3BT 111 HP engine starts and runs good. 600x22.5 tires are estimated at 80%. Solid push bar, good glass, tight center and boom with squirt. Bypass bucket. Cab has heat & lights. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Timberjack	810B	1996	$72,500
	Timberjack 1210B Forwarder *SOLD* 1996 Timberjack 1210B Double Bunk Forwarder. Hour meter reads 20,000 hours. Reman 6 cyl. Perkins engine with 3,000 hours. New swing bearing for boom, all hydraulic cylinders have been rebuilt recently. 700 tires, estimated at 85%. Loader is tight, new swing bearings & cans. New rack & pinion gears. Cab has heat, A/C, radio, and a new seat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	Timberjack	1210B	1996	$65,900
	Timberjack 360C Skidder 1996 Timberjack 360C Grapple Skidder with Winch. New Reman Cummins 6BT engine starts and runs good. 24.5x32 Firestone tires are estimated at 50%. For an additional $4,000, 23.1x26 tires can be put on, 90% fronts and 75% rears, includes a set of bear paw chains. New center pins. Wider custom blade is currently on the machine but will be replaced with an OEM blade before sale. Heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Timberjack	360C	1996	$60,000
	Timberjack 230A Forwarder 1996 Timberjack 230A Forwarder. Cummins 4BT engine. New clutch, front cradle pins & bushings, blade pins & bushings, steering and shift cables, LED lights, starter, & alternator. Also has a new bucket, rotator, exhaust, swing motors, and one of the gear boxes on the boom. Brakes in the transfer case have been changed along with a new differential lock assembly on the rear axle. New seat and hoses. Hydraulic and drive pumps were rebuilt 4 years ago. Main cylinder was repacked and changed to a new 3/8" thick barrel. Heat, LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Timberjack	230A	1996	$47,500
	Timberjack 230A Forwarder 1996 Timberjack 230A Double Bunk Forwarder. Rebuilt Cummins 4BT engine was installed a year ago. 30.5x32 tires, fronts estimated at 40% and rears at 75%, includes two sets of ring chains. Loader is tight, extenda-boom. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Timberjack	230A	1996	$46,500
	John Deere 690E with a Lim-mit 2000B Delimber 1996 John Deere 690E with a Lim-mit 2000B Delimber. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders, boom cylinder is being rebuilt. drive motors and hoses in good working condition, U/C in good working order, 32" triple grouser pads. 2000B LIM-MIT delimber has straight boom, chains and roller in good working order, sharp knives, circular topping saw, Espar pre heat system, fuel heater, forestry guard package. Electronic idle will need work. Another 690E parts machine with a LIM-MIT delimber can be included. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Loader is located in Northcentral USA.	John Deere	690E	1996	$45,000
	LinkBelt 2800 with Propac 453 Delimber *ON HOLD* 1996 LinkBelt 2800 with Propac 453 Delimber. Hour meter reads 18,249 hours. Isuzu 6BG1T engine. 32" triple grouser pads, undercarriage is estimated at 80%. Propac 453 delimber is in good working order. Topping saw. Boom is straight. Grab arms are tight. Forestry package, heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *ON HOLD*	Link Belt	2800	1996	$41,500
	Hydro Ax 511EX Feller Buncher 1996 Hydro Ax 511EX Feller Buncher. This machine has a Cummins 6BT engine, runs and starts good, 7,500 hours, strong hydraulics and cylinders, hydrostats are in good order, tight center section and lift arms, 20" head, straight blade, good teeth, could use turning, heat, A/C, lights. 28L x26 tires - 3 are @ 75%, 1 is @ 30%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Hydro-Ax	511EX	1996	$33,500
	Timberjack 560 Skidder 1996 Timberjack 560 Grapple Skidder with Winch & Timberjack 560 Parts Skidder. Hour meter reads 18,000 hours. Cummins 5.9 engine starts and runs good. 30.5x32 tires, rears are brand new, fronts are estimated at 30%. Includes a set of ring chains estimated at 30%. Anything off the parts machine can go with, everything is there but the tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.	Timberjack	560	1996	$30,000
	Franklin 3005 Feller Buncher 1996 Franklin 3005 Feller Buncher. Hour meter reads 6,250 hours. Cummins 4BT engine. 18" Rotosaw felling head is tight. All tires are in good condition, estimated at 90%. New main cylinder on the boom. Enclosed cab with heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Franklin	3005	1996	$29,900
	Timbco 425C Feller Buncher 1996 Timbco 425C Feller Buncher with a Timbco Bar Saw Head. This equipment has a 8.3 Cummins engine is strong, Undercarriage is @ 25%, 24" single grouser, strong boom, leveling system seeps over time, Timbco 30" bar saw head is in good order, also has accumulator, heat, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Timbco	425C	1996	$27,500
	Timberjack 450 Skidder 1996 Timberjack 450 Dual Arch Grapple Skidder with Winch. This equipment has a 5.9 Cummins engine, runs and starts good, Wabasto pre heater, Esco grapple, tight pins and bushings, winch will need a drive shaft. 30.5 x 32 tires @ 70% with 2 sets of bear Claw chains @ 90%. Heat Light and Forestry guard. Expanded brush blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.	Timberjack	450	1996	$25,500