Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Morbark 23NCL Whole Tree Chipper1994 Morbark 23NCL Whole Tree Chipper. 850 HP CAT 3412 with 4,600 hours on in-frame overhaul. Top feed chute. Front of engine resealed. New drive belt and Poly chain. Does not burn any oil. Starts well in cold weather. Cooling system in good shape. Clutch in good shape. All new liners in 2021 on the chipper. Babbit 8 knife system installed. New remote system installed that controls all moving parts on the chipper. 8 knife disc is in good shape, set up for 7/8" chips. AR 450 face plates on disc less than 3 years old. New bearings on feed rollers, sprockets and chains recently replaced. Frame is in good shape. Air compressor included. Tires are in good shape and owner will check hubs and brakes at time of sale. Chipper was converted from a WCL, professionally done. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is lcoated in Canada. |
Morbark | 23NCL | 1994 |
$112,500
|
|
Tree Farmer C6F Forwarder1994 Tree Farmer C6F Forwarder. Rebuilt Cummins 5.9 BT engine has 500 hours on it. Powershift transmission. 710 tires, front tires are 90% with ring chains on them, rear tires are at 25% with double diamond chains. Tight center. Has high plow pins, & the blade has been widened to 10'. Repainted to Timberjack green. Enclosed cab has heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Tree Farmer | C6F | 1994 |
$72,000
|
|
Timberjack 230A Forwarder1994 Timberjack 230A Forwarder. Cummins 4BT engine has been rebuilt. 28Lx26 tires, rears are estimated at 80%, fronts fronts estimated at 25%. Bunks are in good condition. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 230A | 1994 |
$46,500
|
|
John Deere 548E Skidder1994 John Deere 548E Grapple Skidder. Hour meter reads 9,579 hours. New injection pump, hydraulic pump, hoses, & glass. 28Lx26 Firestone tires, 1 is new, 3 are estimated at 70%. Heat, A/C, updated LED lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 548E | 1994 |
$45,000
|
|
Valmet Woodstar 546 Forwarder1994 Valmet Woodstar 546 Forwarder. Hours are unknown. Ford 4 cylinder turbo diesel engine. 28Lx26 tires are estimated at 60%, includes a set of double diamond studded ice chains. 600/55-26.5 tires are estimated at 50%. 2019 Hultdins SuperGrip grapple. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | Woodstar 546 | 1994 |
$43,500
|
|
Hydro-Ax 611E Feller Buncher1994 Hydro-Ax 611E Feller Buncher. Hour meter reads 9,130 hours. Newer Cummins 6BT engine with low hours. 28Lx26 tires, estimated at 60%. Risley 21" felling head is in good condition. Heated cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hydro-Ax | 611E | 1994 |
$39,500
|
|
1994 TREE FARMER C6 GRAPPLE CABLE1994 TREE FARMER C6 GRAPPLE CABLE SKIDDER 6 CYL CUMMINS POWERSHIFT HEATER |
Tree Farmer | C6 | 1994 |
$32,900
|
|
John Deere 643D Feller Buncher1994 John Deere 643D Feller Buncher. John Deere 6068T engine starts and runs good. 28Lx26 tires are estimated at 70%, set of diamond chains for the rear are included. Center is tight. Also has spacers to run 73.00x44 tires. New teeth for the head will be included. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 643D | 1994 |
$30,000
|
|
John Deere 648E Single Arch Winch ***ON HOLD***1994 John Deere 648E Single Arch Grapple Skidder with Winch. Hour meter reads 13,000 hours. Transmission has been replaced. 64/32.00-25 tires, fronts estimated at 50%, rears estimated at 80% with one being new. Can also include 2 spare tires that need to be vulcanized. Brand new clutch, Esco bunching grapple. New mainline. Updated front blade pin. Cab is enclosed and has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
John Deere | 648E | 1994 |
$29,900
|
|
Franklin C7F Skidder1994 Franklin C7F Dual Arch Grapple Skidder with Winch. This skidder has a Cummins BTA 5.9 engine, runs and starts good, strong Clark Power Shift transmission, quick steer, dozer blade, tight center section and arch, strong winch, 118" grapple, 30.5 x 32 tires @ 75% with Bear claw chains. Heat & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Franklin | C7F | 1994 |
$27,900
|
|
Barko 775B Feller Buncher1994 Barko 775B Feller Buncher. This machine has a Cummins 8.3 engine, runs and starts good, under 9,000 hours, strong hydraulics, charge pump and hydrostatics have been gone through, few leaks, decent center section, grab arms and accumulator arms have been re pinned and bushed recently. 22" head, straight disc good teeth. 28L x 26 tires @ 25%. Mono tracks and chains available. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | 775B | 1994 |
$27,500
|
|
Komatsu PC250 Carrier with a Limmit 2200B Delimber1994 Komatsu PC250 Carrier with a Limmit 2200B Delimber. This equipment has a Komatsu 6 cyl. engine. Owner stated this machine ran good when it was parked but may need a tune up, engine has been rebuilt, strong hydraulics has a few leaks, undercarriage is @ 40%, 28" triple grouser pads, straight boom has been re-enforced in a few spots, decent knives and grab arms, swing lock has been bypassed may need a wiring harness. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC250 | 1994 |
$24,900
|
- 1
- 2