Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 490D Processor with Fabtek Head

John Deere 490D Processor with Fabtek Head

1988 John Deere 490D Processor with a Fabtek Head. This equipment runs and starts good, strong hydraulics, few minor leaks, 24' pads, roller, sprocket, and chains are all in good order, new main pin and bushings, head is in working order. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA.

John Deere 490D 1988
$38,500
John Deere 653E Harvester with a Fabtek 4 Roller Head

John Deere 653E Harvester with a Fabtek 4 Roller Head

1995 John Deere 653E Harvester with a Fabtek 4 Roller Head. This equipment runs and starts good, quick couplers, strong hydraulics and cylinders, undercarriage is in good working order, 24" double grouser pads, tight boom, new pins and bushings on arms on the head, decent feed rollers and chains, computer and measuring system are in good working order, heat, A/C, and new LED lights. New 1/2" Lexon front window and new 1/4" side windows. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 653E 1995
$47,500
John Deere 490E Processor with Fabtek 4 Roller Head *SOLD*

John Deere 490E Processor with Fabtek 4 Roller Head *SOLD*

1996 John Deere 490E with Fabtek 4 Roller Head. This machine has a new 4 cylinder John Deere engine 2,000 hours ago. Cab has heat, A/C & Pro-Heater, many spare parts to go with, spare saw motor, new roller bearings, new chain, spare brain box. Well maintained machine, oil has been changed every 200 hours, tight controls, and always greased. Estimated 12,500 frame hours. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 490E 1996
$45,900
John Deere 690ELC Processor

John Deere 690ELC Processor

1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 690ELC 1998
$69,500
John Deere 653G Processor ***SOLD***

John Deere 653G Processor ***SOLD***

2000 John Deere 653G Processor with 4 Roller Head. This machine has 19,000 hours, engine has been rebuilt, planetaries have been gone through, feed rollers and grab arms have been welded, undercarriage is in good working order, tight boom, strong hydraulics, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 653G 2000
$42,900
John Deere 653E Processor with a 2000 Fabtek 4 Roller Head

John Deere 653E Processor with a 2000 Fabtek 4 Roller Head

2000 John Deere 653E Processor with a 2000 Fabtek 4 Roller Head. This equipment has a new main pump, pilot pump, complete valve bank rebuild on both valve banks, new screens in hydraulic tank, new compensator spools in valves, lots of new hoses. Complete fully working spare head, and 8 extra complete valves, extra counters for measuring wheel, heat, A/C, pro heat system. Lights all around, rotary manifold rebuilt 500 hours ago, and new final drive 1,000 hours ago. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 653E 2000
$88,500
John Deere 653G Harvester

John Deere 653G Harvester

2000 John Deere 653G Harvester with a 4 Roller Head. Hour meter reads 17,100 hours, John Deere 6068 engine, runs and starts good, decent feed rollers and grab arms, has a few leaks, strong hydraulics and drive system, just went through the tilt cylinders, undercarriage is in good working order, tight boom, measuring system works as it should, head has a little play. Heat, A/C needs a charge, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

John Deere 653G 2000
$Call for Price
John Deere 1270D Processor ***SOLD***

John Deere 1270D Processor ***SOLD***

2002 John Deere 1270D Processor. Owner stated that this processor has 9,600 hours, 8.2L John Deere engine, runs and starts good, has been well maintained, Timberjack 762C processing head in good working order, strong hydraulics, tight pins and bushings center and boom, tires are @ 85%, tracks and chains in very good condition, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. ***SOLD***

John Deere 1270D 2002
$100,000
John Deere 120 Processor ***SOLD***

John Deere 120 Processor ***SOLD***

2002 John Deere 120 Processor with a Fabtek 4 Roller Head. This machine has a newer engine and pumps, undercarriage is in good working condition, head is in good working order and has been reinforced at weak points, strong hydraulics and cylinders, Espar pre heater, fire suppression system, 18,000 frame hours, A/C, heat and gauges all work. Spare parts & undercarriage go with machine for an additional $5,000.00. ($61,500) Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 120 2002
$56,500
John Deere 200LC Processor with a 620 Waratah Head

John Deere 200LC Processor with a 620 Waratah Head

2002 John Deere 200LC Processor with a 620 Waratah Head. This machine has a complete dealer engine approx. 4,000 hours ago, runs and starts good, new electronic module in head. Pallet of Waratah parts: feed wheels, cylinders, valves, etc. Decent undercarriage. Boom is in good working order, heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 200LC 2002
$38,000
John Deere 2054 Harvester

John Deere 2054 Harvester

2004 John Deere 2054 Harvester with a Waratah 620B Head. This equipment has 14,500 frame hours. New motor has less than a 1,000 hours. Close to new approx. 95% rails, pads, front idlers, & sprockets. New hydraulic pumps 2,500 hours ago. New final drives 2,500 hours ago, rebuilt center joint 3,500 hours ago. All hydraulic hose and fittings are good. All boom cylinders are good. All controls work good, travel is good. The Waratah 620B head has same hours as machine, cylinders are all good, hydraulic hoses are all good, coupler fitting to boom at top of head is good, head rotate is good. Feed rollers are good, read outs good, 2 saws, Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

John Deere 2054 2004
$79,500
John Deere 2054 Processor  ***SOLD***

John Deere 2054 Processor ***SOLD***

2006 John Deere 2054 Processor with Waratah HTH 616 Head. This machine has a 6068T Teir II engine, runs and starts good, has been well maintained, undercarriage is in good working condition, tight boom, Waratah HTH 616 head is tight, strong hydraulics, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

John Deere 2054 2006
$107,500