Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
John Deere 1010E Forwarder2013 John Deere 1010E 6 Wheeled Forwarder. Hour meter reads 12,094 hours. 710/45-26.5 tires are estimated at 95%. Olofsfors eco tracks are included, 200 hours of use on them. Brand new bucket and windows. Blade is in good shape, bunks are straight, center is tight. Preheat system is in good working order. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 1010E | 2013 |
$135,000
|
|
John Deere 1110E Forwarder2013 John Deere 1110E 8 Wheeled Forwarder. Hour meter reads 20,000 hours. 710/45-26.5 tires are estimated at 70%. Crane and center are tight, center pins were done less than 1,000 hours ago, main lift pin was just redone. Espar preheat system. Leveling system works manually but needs new sensors. New windshield and actuator for hood. Espar preheat system. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 1110E | 2013 |
$136,500
|
|
John Deere 1110E Forwarder ***SOLD***2013 John Deere 1110E 8 Wheeled Forwarder. Hour meter reads 14,067 hours. 710/45-26.5 tires are estimated at 75%. CF510 crane with 2021 Hultdins SG 260-S grapple. Injectors, center bearings, and EGR valve were done last spring. Espar preheat system. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
John Deere | 1110E | 2013 |
$Call for Price
|
|
John Deere 1210E ForwarderJohn Deere 1210E Forwarder. Good machine works as it should. |
John Deere | 1210E | 2013 |
$Call for Price
|
|
John Deere 135G with HAHN 133 Processing Head2013 John Deere 135G with HAHN 133 Processing Head. Hour meter reads 1,780 hours. 28" triple grouser pads, undercarriage is estimated at 80%. Hahn 133 processing head is in good condition. Rearview camera. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
John Deere | 135G | 2013 |
$157,500
|
|
Link Belt 210X2 Processor with Southstar QS500 Head2013 Linkbelt 210X2 Processor with Southstar QS500 Head. This machine has 9,691 hours, runs and starts good, head reseal & major cylinders have been done, dry machine, newer main hydraulic pump, undercarriage is in good working order, tight boom, head is in good working condition, heat, A/C, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
Link Belt | 210X2 | 2013 |
$198,500
|
|
John Deere 2154D with Limmit 2100C Delimber2013 John Deere 2154D with Limmit 2100C Delimber. Hour meter reads 9,428 hours. 650 hours on new engine and rebuilt hydraulic pump. Winch cables, hoses, and drive motors were gone through over the winter. 24" double grouser pads, undercarriage is estimated at 90%. 500 hours on new rails, sprockets, & rollers. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 2154D | 2013 |
$163,500
|
|
Hood 24000 Loader with a Hood 60" Slasher Trailer Mounted2013 Hood 24000 Loader with a Hood 60" Slasher Trailer Mounted. This equipment has a John Deere 6068 6.8L engine, runs and starts good, hour meter reads 7,704 hours, strong hydraulics and cylinders, tight boom and 360 grapple, live heel, slasher table 8' 12' 16', straight disc and good teeth, dual outriggers, tight joy stick controls. Heat, A/C, and lights. Carrier has good brakes and tires, carrier has a bunk that can hold 12 cords. Also has a tow dolly for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hood | 24000 | 2013 |
$104,500
|
|
Morbark 2755 Flail Chiparvestor2013 Morbark 2755 Flail Chiparvestor. Hour meter reads ~15,000 hours. CAT 27 875hp engine. 3 knife chipper disc option. Recently rebuilt gearbox and new spouts. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Morbark | 2755 | 2013 |
$357,500
|
|
Bandit 3400 Stump Grinder2013 Bandit 3400 Tracked Stump Grinder. Hour meter reads 2,400 hours. Newer engine and hydraulic pump with 700 hours. 30" grinding wheel, 78" blade, & 16" rubber tracks are in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 3400 | 2013 |
$65,000
|
|
HSM 405 H2 Steep Slope Harvester2013 HSM 405H2 Steep Slope Harvester. This machine has approx. 5,000 hours, engine and the crane replaced at 4,000 hours, IVECO engine 6.7L, NAF balanced portal tandem axles, 100% selectable differential lock, machine has steep slope winch mounted on unit. The head is a Logmax 6000, Loglift crane, tilting cab, spare tire, air cushioned heated seat. 710 tires and tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
HSM | 405 H2 | 2013 |
$Call for Price
|
|
CAT 501HD with Fabtek 4 Roller Processing Head ***SOLD***2013 CAT 501HD with Fabtek 4 Roller Processing Head. Hour meter reads 14,500 hours. CAT C6.6 engine. 24" double grouser pads & brand new undercarriage. ProHeat preheater. Lammi fire suppression system. Fabtek 4 Roller Processing Head is in good condition. New knives, repinned and rebushed the head, newer roller arms, new injectors, injection pump, engine wiring, and ECU. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
CAT | 501HD | 2013 |
$Call for Price
|