Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 653G Harvester

John Deere 653G Harvester

2000 John Deere 653G Harvester with a 4 Roller Head. Hour meter reads 17,100 hours, John Deere 6068 engine, runs and starts good, decent feed rollers and grab arms, has a few leaks, strong hydraulics and drive system, just went through the tilt cylinders, undercarriage is in good working order, tight boom, measuring system works as it should, head has a little play. Heat, A/C needs a charge, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

John Deere 653G 2000
$Call for Price
John Deere 120 Processor with  Fabtek 4 Roller Head

John Deere 120 Processor with Fabtek 4 Roller Head

1999 John Deere 120 Processor with a Fabtek 4 Roller Head. This equipment has a reman John Deere 4 cyl. engine, runs and starts good, quick couplers, strong hydraulics and drive system. Strong cylinders, tight boom, undercarriage is @ 80%, triple grousers. Head has strong grab arms, feed rollers, and chains are in good working order. Tight controls, measuring system is in good working condition, heat, A/C needs attention. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA

John Deere 120 1999
$Call for Price
John Deere 653E Harvester with a Fabtek 4 Roller Head

John Deere 653E Harvester with a Fabtek 4 Roller Head

1995 John Deere 653E Harvester with a Fabtek 4 Roller Head. This equipment runs and starts good, quick couplers, strong hydraulics and cylinders, undercarriage is in good working order, 24" double grouser pads, tight boom, new pins and bushings on arms on the head, decent feed rollers and chains, computer and measuring system are in good working order, heat, A/C, and new LED lights. New 1/2" Lexon front window and new 1/4" side windows. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 653E 1995
$35,900
John Deere 200LC Processor with a 620 Waratah Head

John Deere 200LC Processor with a 620 Waratah Head

2002 John Deere 200LC Processor with a 620 Waratah Head. This machine has a complete dealer engine approx. 4,000 hours ago, runs and starts good, new electronic module in head. Pallet of Waratah parts: feed wheels, cylinders, valves, etc. Decent undercarriage. Boom is in good working order, heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

John Deere 200LC 2002
$38,000
John Deere 490D Processor with Fabtek Head ***SOLD***

John Deere 490D Processor with Fabtek Head ***SOLD***

1988 John Deere 490D Processor with a Fabtek Head. This equipment runs and starts good, strong hydraulics, few minor leaks, 24' pads, roller, sprocket, and chains are all in good order, new main pin and bushings, head is in working order. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA. ***SOLD***

John Deere 490D 1988
$38,500
John Deere 653G Processor ***SOLD***

John Deere 653G Processor ***SOLD***

2000 John Deere 653G Processor with 4 Roller Head. This machine has 19,000 hours, engine has been rebuilt, planetaries have been gone through, feed rollers and grab arms have been welded, undercarriage is in good working order, tight boom, strong hydraulics, heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 653G 2000
$42,900
John Deere 120 Processor with Fabtek Head

John Deere 120 Processor with Fabtek Head

Woods ready processor. Just came off of a job. Really good undercarriage. Runs really good. Very reliable machine. Could use some hoses. Roller measuring system. Pump done about 500 hours ago. Good glass. Good heat. Valve banks were resealed. Pretty straight for the year. 2 speed tracks works. Have a lot of spare bars to go with. Also have spare bar mount pieces and auto tensioner. Could use a few things on it. Would seriously consider trade for small firewood processor. Would seriously consider trade for small sawmill. Thank you for looking

John Deere 120 2001
$45,000
John Deere 759GH Tracked Harvester with Logmax 7000 Head

John Deere 759GH Tracked Harvester with Logmax 7000 Head

2005 John Deere 759GH Track Harvester with Logmax 7000 Head. This equipment has a 6081 John Deere Diesel Engine, runs and starts good, hydrostatic drive with high and low, strong hydraulics, tight pins and bushings. Undercarriage will need some attention, cut to length Logmax 7000 processing head, Logmate 400 measuring system, topping saw, Thumbnail spiked feed wheels, heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

John Deere 759GH 2005
$49,500
John Deere 120 Processor ***SOLD***

John Deere 120 Processor ***SOLD***

2002 John Deere 120 Processor with a Fabtek 4 Roller Head. This machine has a newer engine and pumps, undercarriage is in good working condition, head is in good working order and has been reinforced at weak points, strong hydraulics and cylinders, Espar pre heater, fire suppression system, 18,000 frame hours, A/C, heat and gauges all work. Spare parts & undercarriage go with machine for an additional $5,000.00. ($61,500) Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 120 2002
$56,500
John Deere 1270D Harvester with 480 Head

John Deere 1270D Harvester with 480 Head

2006 John Deere 1270D Harvester with 480 Head. Hour meter reads 17,000 hours, runs and starts good, strong hydraulics and cylinders. Pre heater, decent center section, squirt boom works as it should, joysticks in good order, cab rotation and leveling needs a censor. Bogies in good working order. Auto lube, pre heater. 710 tires with tracks. Fire suppression system needs a charge.480 has some ware and welds but in good working order. Heat, A/C may need to be charged, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 1270D 2006
$65,000
John Deere 690ELC Processor

John Deere 690ELC Processor

1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 690ELC 1998
$69,500
John Deere 2054 Harvester

John Deere 2054 Harvester

2004 John Deere 2054 Harvester with a Waratah 620B Head. This equipment has 14,500 frame hours. New motor has less than a 1,000 hours. Close to new approx. 95% rails, pads, front idlers, & sprockets. New hydraulic pumps 2,500 hours ago. New final drives 2,500 hours ago, rebuilt center joint 3,500 hours ago. All hydraulic hose and fittings are good. All boom cylinders are good. All controls work good, travel is good. The Waratah 620B head has same hours as machine, cylinders are all good, hydraulic hoses are all good, coupler fitting to boom at top of head is good, head rotate is good. Feed rollers are good, read outs good, 2 saws, Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

John Deere 2054 2004
$79,500