Multitek Firewood Processors For Sale
Featured in Multitek
| Photo |
Title
|
Make | Model | Year | Price |
|
Multitek 2040 Firewood Processor1986 Multitek 2040 Firewood Processor. Hours are unknown. John Deere engine starts and runs good. Overhead grapple was redone last year, all pins and bushings, cylinders rebuilt. 8 way wedge, 30' conveyor. Conveyor sides were just reinforced and tires are off but included. Heat in cab. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Southwest USA. |
Multitek | 2040 | 1986 |
$40,000
|
|
Multitek 2040 Firewood Processor w/ Timberwolf 24' Conveyor1988 Multitek 2040 Firewood Processor with Timberwolf 24' Conveyor. Hour meter reads 7,100 hours. John Deere 4cyl engine. 3/4” bar saw and chain, shuttle grapple, 6-way wedge, & auto split. Timberwolf Conveyor has a new belt. Videos available upon request. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA. |
Multitek | 2040 | 1988 |
$29,900
|
|
Multitek 2040XP90 Firewood Processor1994 Multitek 2040XP90 Firewood Processor. Overhauled engine, 5” splitting ram, 10 way wedge, & 4 leg live deck. Homemade cab, strong running unit. Ready to go to work. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. |
Multitek | 2040XP90 | 1994 |
$43,000
|
|
Multitek 2020 LDCS Firewood Processor with 30' Conveyor1996 Multitek 2020 LDCS Firewood Processor with 30' Conveyor. Hour meter reads 2,203 hours but frame hours are unknown. John Deere diesel engine starts and runs good. Valve bank is dry. Grapple assist is in good working order. Newer water pump, radiator, starter, bar return spring, fuel tank, and front seal. Ram and wedge adjust cylinders were just rebuilt. 3 face cords per hour. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. |
Multitek | 2020 LDCS | 1996 |
$37,500
|
|
Multitek 2020 LDCS Firewood Processor2002 Multitek 2020 LDCS Firewood Processor with 15' Blockbuster Conveyor. New Yanmar 4cyl diesel engine with an estimated 425 hours. 8 way wedge. 14' hydraulic chain-driven conveyor. New electric boost pump, new alternator, new battery. Shuttle grapple in good working order. Tires are brand new. Includes extra bar and 8 chains. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Southcentral USA. |
Multitek | 2020 LDCS | 2002 |
$35,000
|
|
Multitek 2020 LDCS Firewood Processor with 30' Conveyor2003 Multitek 2020 LDCS Firewood Processor with 30' Conveyor. One owner machine, stored inside its whole life. 460V, 3 phase 40 HP electric motor. Frame hours are unknown but thought to have very little, used during winter to feed boiler. 8' log deck included, 6-way wedge. Hydraulic 30' Conveyor with Grizzly Bars. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. |
Multitek | 2020 LDCS | 2003 |
$35,000
|
|
Multitek SFP18D Firewood Processor2004 Multitek SFP18D Firewood Processor. 34 HP engine. Bar saw. 4 & 6-way splitting wedges. Includes a Multitek 30' chain-driven conveyor. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. |
Multitek | SFP18D | 2004 |
$32,500
|
|
Multitek 2020CSC Firewood Processor ***SOLD***2004 Multitek 2020CSC Firewood Processor with Conveyor. Hour meter reads 1,780 hours. John Deere 4020T engine starts and runs good. Shuttle grapple, 6 & 8 way wedges. 3 leg live deck. 20" max log diameter. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. ***SOLD*** |
Multitek | 2020CSC | 2004 |
$Call for Price
|
|
Multitek 2040XP2 Firewood Processor w/ America 24' Conveyor2005 Multitek 2040XP2 Firewood Processor with American 24' Conveyor. Hour meter reads 13,712 hours. John Deere 4045 engine is new, with less than 400 hours. New grapple bar, mid section, clutch, and blower motor. New joysticks. 4, 10, & 12 way wedges. Heat, A/C, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. |
Multitek | 2040XP2 | 2005 |
$77,500
|
|
Multitek 2040XP2 Firewood Processor2006 Multitek 2040XP2 Firewood Processor. Hour meter reads 19,352 hours, owner is not sure if it's correct. John Deere 4045 diesel engine. 10-way and 4-way wedges. Bar saw unit. Grapple was just gone through. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA. |
Multitek | 2040XP2 | 2006 |
$46,500
|
|
Multitek 1610EZ Firewood Processor2008 Multitek 1610EZ Firewood Processor. 24 HP Honda GX670 engine. New 28 gpm. hydraulic pump, hydraulic level, temp indicator, two hydraulic hoses, & two tires. This unit has a log lift, clamp, feed, 18" max diameter bar saw, & 12' conveyor. Roller support has been added to accommodate a 16' log. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Canada. |
Multitek | 1610EZ | 2008 |
$21,000
|
|
Multitek 2020CSC Firewood Processor2011 Multitek 2020CSC Firewood Processor. Hour meter reads 7,000 hours, unit has been completely gone through. 2 leg live deck, 8 way wedge, shuttle grapple, 24' conveyor. Heated cab. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA. |
Multitek | 2020CSC | 2011 |
$59,500
|