2022 Multitek 1620ss. 49 hp kohler diesel. 6-way wedge 16ft pivoting conveyor. Log bump stop. 3 strand live deck. 800 hours. Very clean unit. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2014 Multitek 2025 Firewood Processor. 5,800 hours. 4045 John Deere motor, runs well. Unit has lots of recent updates. Entirely new electronic valving and wiring as of 2022, new piston pump and rebuilt gear pump 2024, new electric joysticks 2025, new danfoss digital and new hydraulic saw motor 2026. Unit comes with a 30' conveyor 4,6,8,10, and custom 12-way wedges. Heat works. Contact Erik at 218-720-0933.

2015 Multitek 2025 Firewood Processor. Hour meter reads 5,950 hours. John Deere 85hp diesel engine. Old display will show engine hours through ECM, but the new display does not pull them, both displays will be included in sale. Heated cab, 120v A/C with opening. No built-in A/C. 4 leg live deck, not currently attached, needs a few new tabs for the bearings before install. New hydraulic pump last summer, also resealed the valve bank. Splitter cylinder was just rebuilt. New display & computer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2017 Multitek 1620SS Firewood Processor. Hour meter reads 2,600 hours. 50hp Kubota diesel engine upgrade. 40" carbide-tipped circular saw. 4 & 6 way wedges. No conveyor. Brand new hydraulic pump. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA.

1996 Multitek 2020 LDCS Firewood Processor with 30' Conveyor. Hour meter reads 2,203 hours but frame hours are unknown. John Deere diesel engine starts and runs good. Valve bank is dry. Grapple assist is in good working order. Newer water pump, radiator, starter, bar return spring, fuel tank, and front seal. Ram and wedge adjust cylinders were just rebuilt. 3 face cords per hour. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA.

2020 Multitek 2040 Firewood Processor. Hour meter reads 4,500 hours. Electric motor. 60" carbide-tipped circular saw blade. Shuttle grapple. 30' conveyor. 60" carbide tipped circular saw, 16-way wedge, & 4 leg live deck. Can include a 2019 Multitek Tumbler for an additional $18,000. Enclosed cab with heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Southcentral USA.