2005 Ponsse Ergo with Ponsse H73E Harvester Head. Hour meter reads 24,285 hours. Newer Opti 4G computer is integrated for GPS. Newer head pump input seal 150 hours ago. Heated seat. Boom and center are good. Lots of parts included, bars, chains, counter sensor, joystick buttons & switches. Like new tracks are available for an additional cost. Webasto preheat. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 2,200 hours. 710/45-26.5 tires are estimated at 90%. Set of tracks are like new. Active frame, C5 crane, with H8 harvesting head. Lunch heater/cooler and AutoMat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2004 Ponsse Ergo with 2015 H7 Harvesting Head. Complete factory refurbish in 2017. Hour meter reads 7,559 hours. Recently resealed front diff. Newer internal bearings in the bogies. Auto-grease, new webasto preheater and computer. Tires are estimated at 90%, includes chains that are like new and Olofsfors tracks estimated at 85%. 2015 H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. One new lower delimbing arm. No cracks, dents, or welds on the head. Heat, A/C, radio, and lights. Can include a 2016 Buffalo as a package for $380,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2009 Ponsse Ergo 6 Wheeled Processor with 2013 H7 Processing Head. Hour meter reads 18,125 hours. Mercedes Benz 6cyl engine starts and runs good. Preheat system, strong hydraulics and cylinders, bogies are in good working order, tight boom, squirt boom works as it should, solid boom base. Pumps are all in good working order, tight center. C4 crane, H7 head, and measuring system are in good working order. 710 tires estimated at 60% with tracks. Auto fire extinguisher. Side window wipers. Owner operated. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218 -720-0933. Equipment is located in Northcentral USA.

2005 Ponsse Ergo Harvester with Ponsse H7 Head. Refurbished in 2014. Hour meter reads 13,158 hours. 710/45-26.5 tires are estimated at 50%, rears are estimated at 60%, includes a set of tracks and chains. Newer used bearing in the crane, new bushings where it pins to the frame. Ponsse rebuilt the gearbox for the crane, and rebuilt rear-end in the bogies less than a year ago. Clutch in the gearbox between the engine and clutch was replaced, with new seals in the hydraulic pumps. Webasto preheater. Comfort controls. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.