2005 Ponsse Ergo 6 wheel Processor w/ an H73 Harvester Head. 24,000 frame hours. Machine runs and operates as it should. 710/45-26.5 tires. Tracks and chains included. Tracks estimated at 75%, Chains estimated at 60%. Owner is open to trade toward a feller buncher. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2012 Ponsse Ergo 6w with a 2015 H7 head. 25,000 frame hours, 14,000 crane hours, 17,000 hours on engine. Head is in very good shape. Opti 4G 4.725 touchscreen cpu. Machine has been extremely well cared for, 2nd owner is retiring. 710/55-34 tires estimated at 70%, 710/45-26.5 tires estimated at 50%. One set of tracks at 30%. New A/C pump, dryer and expansion valve. New alternators, pulleys and auto tensioner. New starter. Main hydraulic has been replaced. Very little welding on the machine. Head has been reinforced with an AR 400 steel plate and hard facing. Crane base line bored winter 2026. Swing box rebuilt 2026. Includes many spare parts with machine - 4 fluid filled bogie tires on rims, 2 rear tires on rims, resealed auto tensioning system for head, feed wheels, knives, crane valve bank, H7 valve bank, swing gear box, boom extension cylinder, several rebuilt cylinders for head, splitter box, radiator, muffler, new alternator, original cpu along with components and modules, working hydraulic pump and motor for drive system. Various fittings, o-rings, and seals. Too many more to list. Estimated value of spare parts is $40,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2017 Ponsse Ergo 8W with 2024 H7 processing head. 16,100 hours. Opti 4 touchscreen. 710 tires at 70%. 1 set of bogie grip tracks estimated at 50%. New grease system in 2024. New internal boom hoses fall of 2025. All new pumps at 13,200 hours. Some spare parts included with machine including hoses and a spare pontoon. Very well cared for machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment located in North Central US.

2015 Ponsse 8W Ergo with 2020 H7 Processing Head. Hour meter reads 12,269 hours. Mercedes engine. Trelleborg 710/45-26.5 tires are estimated at 90%. Inner boom hoses have just been replaced. Webasto preheat system. C5 crane, double squirt boom. 2020 Ponsse H7 processing head, good feed wheels, measuring system is in working order. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

2015 Ponsse Ergo 8 Wheel Harvester with H7 Head. Hour meter reads 4,900 original hours. Pre-emissions Mercedes engine. 710/45-26.5 tires are estimated at 40-60%. Includes two sets of tracks estimated at 25%. C5 crane is tight, H7 harvesting head is in good condition and working order. Hydraulic pumps were resealed within the last 100 hours, drive coupler replaced at 4,300 hours. Webasto preheater, heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2006 Ponsse Ergo Harvester with a H73E Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, cylinders and valve banks are in good working order. Tight boom and base, squirt boom is in good condition, bogie and axles are in working order. H73E and measuring system are in good condition. 710 rear tires @ 50%. Heat, A/C, and new lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.