2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 1,225 hours. Mercedes OM 936 Stage V/Tier 4F engine. 710/45-26.5 tires are estimated at 90%, tracks can be included. C44+ crane with an H8 harvesting head. Center and crane are tight. Webasto preheat system. Active Frame. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2022 Ponsse Ergo 8 Wheeled Harvester with Ponsse H8 Harvesting Head. Hour meter reads 3,189 hours. Includes a 50/50 warranty on any major components (not due to operator error) for 150 hours, work performed must be done at a Ponsse certified shop. 710/45-26.5 front & rear tires are estimated at 90%. Pewag tracks are estimated at 90%. C5 crane is in good condition, boom is tight, hoses are good. Ponsse H8 harvesting head, no welds or cracks. Feed wheels, knives, and hood are in good condition. Few hoses could be replaced. Webasto preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2015 Ponsse Ergo with 4,800 original hours. Has a c5 crane with h7 head. Comes with tracks that are about 25%.

2014 Ponsse Ergo 8 Wheeled Processor with 2020 H7 Head. Hour meter reads 12,180 hours. Mercedes Benz OM 926 engine. 710 tires are estimated at 80%. One set of tracks can be included for additional cost. Fire suppression system, C4 crane, strong hydraulics and cylinders. Webasto preheat system. Very well maintained and tight. 2020 Ponsse H7 head has been used for one season, it's in great condition. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2013 Ponsse Ergo 6 Wheeled Harvester with Ponsse H7 Harvesting Head. Hour meter reads 7,323 hours, ECM was replaced at 3,000 hours, frame hours are 10,300 hours. 710/45-26.5 bogie tires at 80%, tracks are estimated at 80%. 700/34-26.5 tires are estimated at 75%. C5 crane, external hoses, auto--grease system. H7 harvesting head has all newer feed motors, with 1,500 hours. Re-pinned and re-bushed 1,500 hours ago. Webasto preheater. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2012 Ponsse Ergo Harvester with H7 Head with big saw box. Hour meter reads 11,675 hours, Mercedes Benz engine, runs and starts good. Complete service by Ponsse at 11,200 hours. Updated fire suppression system, tight C4 crane, strong hydraulics and cylinders. 2 sets of tracks @ 95%. 710 tires, pre-heater. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***PRICE REDUCED FROM $240,000***