1998 Ponsse Ergo with H73 Processing Head. Hour meter reads 22,000 hours. CAT engine starts and runs good. 700 tires are estimated at 70%. Tight center, bucket, and boom. Cab leveling doesn't work. Bogies are in good working order. Good turn table. Indexator and rear boomswing motor has been removed. H73 processing head is in good working order. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2004 Ponsse Ergo with 2015 H7 Harvesting Head. Complete factory refurbish in 2017. Hour meter reads 7,559 hours. Recently resealed front diff. Newer internal bearings in the bogies. Auto-grease, new webasto preheater and computer. Tires are estimated at 90%, includes chains that are like new and Olofsfors tracks estimated at 85%. 2015 H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. One new lower delimbing arm. No cracks, dents, or welds on the head. Heat, A/C, radio, and lights. Can include a 2016 Buffalo as a package for $380,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Ponsse 6 Wheeled Ergo with Ponsse H7 Harvesting Head. House meter reads 10,473 hours. Refurbished in 2016. 710/45-26.5 tires on the bogies are estimated at 80%, other two tires are estimated at 70%. Includes a set of tracks and chains. Webasto preheater, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2010 Ponsse Ergo with H7 Harvesting Head. Hour meter reads 19,789 hours. Mercedes Benz engine. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 40%, includes a set of tracks that are estimated at 85%. Head pump was done. Fiber clutch and pumps were done at 14,500 hours. H7 harvesting head has new knives and bushings. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.