2004 Ponsse Ergo with 2015 H7 Harvesting Head. Complete factory refurbish in 2017. Hour meter reads 7,559 hours. Recently resealed front diff. Newer internal bearings in the bogies. Auto-grease, new webasto preheater and computer. Tires are estimated at 90%, includes chains that are like new and Olofsfors tracks estimated at 85%. 2015 H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. One new lower delimbing arm. No cracks, dents, or welds on the head. Heat, A/C, radio, and lights. Can include a 2016 Buffalo as a package for $380,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2007 Ponsse Ergo 6 Wheeled with H7 Harvesting Head. Hour meter reads 17,000 hours. 710/45-26.5 tires, estimated at 30%. A few bogie tires should be replaced. 700/55-34 tires are estimated at 55%. C4 crane is tight, H7 harvesting head. New upper knives, new saw motor, leveling box, head has been re-pinned and re-bushed. Updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

2018 Ponsse Ergo 8 Wheel Harvester with H7 Head. Hour meter reads 11,700 hours. 710/45-26.5 tires are estimated at 75%, includes a set of Olofsfors tracks estimated at 75%. H7 harvesting head is in good condition, C5 crane. Owner operator. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2002 Ponsse Ergo with Ponsse H73 Processing Head. Engine runs well. Machine has several cylinders, hoses and fittings leaking. 700/55-34 and 700/50-26.5 tires @ 30%. HN 125 Crane. Sheet metal fairly straight. Pins and bushings in decent condition. Machine is working and cutting wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2015 Ponsse Ergo Harvester with H7 Head. Hour meter reads 18,000 hours. 710/45-26.5 tires are estimated 75%. C5 crane, dual swing motors. Includes one set of tracks. Splitter gearbox and clutch was replaced by Ponsse this year. Opti computer system, saw motor, accumulator, measuring wheel, top knife, and feed rollers replaced spring of 2025. Mainly been in pine plantations. Includes spare parts and manuals. Heat, A/C, radio, & lights. Set of flotation tracks can be included for an additional cost. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2014 Ponsse Ergo 6 Wheeled with 2021 H8 Head. Hour meter reads 15,902 hours. C5 crane with internal hoses, 2021 H8 Head with minimal use, harvester pump and and updates to crane at 14,000 hours. Color marking stump spray system. Tires estimated at 80%. Auto-grease & webasto preheat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.